HELLO KITTY HKLEDBTHP1-RD-SPC Wireless Light-Up Headphones User Manual

: June 22, 2024
: HELLO KITTY

Table of Contents

HELLO KITTY HKLEDBTHP1-RD-SPC Wireless Light-Up Headphones
Specifications
Getting Started
FCC
Warranty Information
Frequently Asked Questions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HELLO KITTY HKLEDBTHP1-RD-SPC Wireless Light-Up Headphones

Specifications

Model: HKLEDBTHP1-RD-SPC Wireless Light-Up Headphones
Manufacturer: Southern Telecom, Inc.
Warranty: 90-Day Limited Warranty

Location of Controls

Answering, Ending Call
Mode (Bluetooth, SD Card, FM Radio)
Previous Track / Volume Down
Volume Up / Next Track
Power / Play, Pause
Micro SD Card Slot
Microphone
USB Type-C Charging Port
LED Indicator
3.5mm Audio Jack

Getting Started

Charging the Headphones
Insert the small connector of the supplied Micro-USB charging cable into the Micro-USB charging port on the headphones. Insert the large connector into a USB power source, such as the USB port on a computer, or into a 5V USB adapter (not included) and plug into a wall outlet. The LED indicator will turn RED while charging, and will turn blue when fully charged.

Powering ON/OFF
Long-press (3s) the button to power headphones On/Off.

Bluetooth Pairing

Long-press (3s) the button to power headphones On.
After a moment, a voice will be heard on the headphones indicating Bluetooth Mode. The LED indicator will ﬂash RED and BLUE.
Set your mobile device to search for Bluetooth devices. When it appears, select HKLEDBTHP1-RD-SPC from the list of found devices.
Once successfully paired, a tone will be heard, and the LED indicator will turn BLUE.

Playback

Press the button to Play/Pause audio.
Long-press (3s) the button to skip to the next track.
Long-press (3s) the button to skip to the previous track.

Volumes

Press the button to increase the volume.
Press the button to decrease the volume. Switching Modes
Long-press the [MODE] button to switch modes. (Modes: Bluetooth / SD Card / FM Radio)
Press the [MODE] to change EQ.

Phone Calls
When paired to a phone via Bluetooth, you can control phone functions using the controls listed below.

Press the button to answer an incoming phone call.
Long-press (2s) the button to reject an incoming phone call.
Double-press the button to redial the last call.

AUX Line In
To connect directly to an external device, insert a 3.5mm AUX cable (not included) to the AUX Line In on the headphones, Connect the other end of the AUX cable to your external device.

SD Card Slot
To play music from an SD card, save ﬁles to an SD Card (not included) and insert them into the SD Card slot on the headphones. Press the [MODE] button to switch the headphones to SD Card.

FCC

Compliance Information

FCC Information
This device complies with Part 15 of the FCC Rules.
CAUTION: Any changes or modiﬁcations not expressly approved could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RADIATION EXPOSURE INFORMATION
This device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

WARNING LI-ION BATTERY INSIDE

This product is ﬁtted with a Li-ion battery. Do not damage, open, or dismantle the battery and do not use it in damp and/or corrosive conditions. Use only compatible chargers. Never dispose of batteries in a ﬁre, and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60°C (140°F).

Rating Label Definitions

Direct current symbol
This symbol represents the FCC Declaration of Conformity and Compliance.
This symbol signiﬁes and declares that this equipment complies with battery charging which complies with California CEC and energy efficiency.
This symbol signiﬁes that the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment.
This symbol signiﬁes that this is a wireless device powered by Bluetooth® technology. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. used under license.

Warranty Information

90-Day Limited Warranty
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is warranted by Southern Telecom, Inc. to the original consumer purchaser against defects in materials and workmanship (“Warranty”) as follows:

To obtain warranty service:

Visit our customer support portal: www.customersupport123.com and select “Support”.
Select the brand, ﬁll out the corresponding form (exchanges require dated proof of purchase from an authorized retailer) then submit your request.
Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to ﬁle a claim with the carrier.

Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modiﬁcation including software modiﬁcations such as the installation of custom ﬁrmware. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE – AT DISTRIBUTOR’S SOLE DISCRETION – ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE

FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.

Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty gives you speciﬁc legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies.

All product names, trademarks, and registered trademarks are property of their respective owners. All company, product, and service names used in this document are for identification purposes only. Use of these names, trademarks, and brands does not imply endorsement.

© 2023 SANRIO CO., LTD.
Used Under License. www.sanrio.com

SIL-35047
Southern Telecom Inc. 5601 1st Ave. Brooklyn, NY 11220

Frequently Asked Questions

Q: What should I do if my headphones are not charging?
- A: If your headphones are not charging, make sure to check the connections between the charging cable and the headphones. Try using a different USB power source or cable to see if that resolves the issue. If problems persist, contact customer support for assistance.