HELLO KITTY HKLEDBTHP1 Wireless Light-Up Headphones User Guide

HELLO KITTY HKLEDBTHP1 Wireless Light-Up Headphones User Guide

Before You Begin

Caution
To ensure safe and proper use, read all safety information before using the device. Only use with manufacturer- approved batteries, chargers, accessories, and supplies.

• THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play with this device.
• Do not disassemble, modify, or repair the device.
• Do not expose the unit to extreme temperatures (heat or cold), open flames, humid, or wet conditions.
• Do not submerge in water.
• Low power may cause poor Bluetooth connection or sound distortion.
• Do not overcharge battery.
• If using with a USB adapter, make sure the adapter is not damaged.
• Do not allow the USB port or the connectors of the supplied USB cable to be exposed to dust, or water, or come into contact with any conductive materials such as liquids, metallic powders, etc.
• The headphones contain built-in batteries and should not be disposed of with regular household waste. Please consult the local authorities on the correct way to dispose of this device.

In the Box

• Wireless Headphones
• Micro-USB Charging Cable
• User Manual

Technical Specifications

• Bluetooth: V5.1
• Battery: 150mAh
• Talk Time: Up to 5 Hours
• Standby Time: 200 Hours
• Charging Time: 2 Hours
• Effective Distance: 10m
• Speaker: 40mm (110db)
• Input Interface: USB Stereo
• Battery Voltage: DC 3.7V
• Power Input: DC 5V

Location of Controls

1. SD Card Slot
2. Power/Mode (Wireless, MP3)
3. Play, Pause/Answering, Ending Call
4. Previous Track / Volume Down
5. Next Track / Volume Up
6. Micro-USB Charging Port
7. LED Indicator
8. 3.5mm Jack

Getting Started

Charging the Headphones

Insert the small connector of the supplied Micro-USB charging cable into the Micro-USB charging port on the headphones. Insert the large connector into a USB power source, such as the USB port on a computer, or into a 5V USB adapter (not included) and plug into a wall outlet. The LED indicator will turn RED while charging, and will turn blue when fully charged.

Powering ON/OFF
Long-press (3s) the POWER button to power headphones On/Off.

Bluetooth Pairing

1. Long-press (3s) the POWER button to power headphones On.
2. After a moment, a voice will be heard on the headphones indicating Bluetooth Mode. The LED indicator will flash RED and BLUE.
3. Set your mobile device to search for Bluetooth devices. When it appears, select HKLEDBTHP1-FB from the list of found devices.
4. Once successfully paired, a tone will be heard, and the LED indicator will turn BLUE.

Playback

• Press the II button to Play/Pause audio.
• Press the button to skip to the previous track,
• Long-press (3s) the button to decrease volume,
• Press the▸▸ button to skip to the next track
• Long-press (35) the▸▸ button to increase volume,

Switching Modes

Press the M button to switch modes.

• Bluetooth Mode pairs to your smart device. The LED indicator will flash BLUE during playback.
• MP3 Mode reads data from the SD card,

Phone Calls

When paired to a phone via Bluetooth, you can control phone functions using the controls listed below.

• Press the II button to answer an incoming phone call
• Long-Press (25) the II button to refuse an incoming phone call.
• Press the ▸ II button to end a phone call,

AUX Line In

To connect directly to an external device, insert a 3.5mm AUX cable (not included) to the AUX Line In on the headphones, Connect the other end of the AUX cable to your external device.

SD Card Slot

To play music in MP3 Mode, save files to an SD Card (not included) and insert into the SD Card slot on the headphones. Press the M button to switch the heaphones to MP3 Mode.

Compliance Information

FCC Information

This device complies with Part 15 of the FCC Rules.

CAUTION: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RADIATION EXPOSURE INFORMATION

This device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

WARNING LI-ION BATTERY INSIDE

This product is fitted with a Li-ion battery. Do not damage, open, or dismantle the battery and do not use it in damp and/or corrosive conditions. Use only with compatible chargers. Never dispose of batteries in a fire, and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60°C (140°F).

Rating Label Definitions

Direct current symbol

This symbol represents FCC Declaration of Conformity and compliance.

This symbol signifies and declares that this equipment complies with battery charging which complies with California CEC and energy efficiency.

This symbol signifies that the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment.

This symbol signifies that this is a wireless device powered by Bluetooth® technology. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. used under license.

Warranty Information

90-Day Limited Warranty

LIMITED WARRANTY TO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is warranted by Southern Telecom, Inc. to the original consumer purchaser against defects in materials and workmanship (“Warranty”) as follows:

To obtain warranty service:

• Visit our customer support portal: www.customersupport123.com and select “Support”.
• Select the brand, fill out the corresponding form (exchanges require dated proof of purchase from an authorized retailer) then submit your request.

Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective, Products received damaged as a result of shipping will require you to file a claim with the carrier.

Warranty service not provided

This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation. lack of reasonable care, unauthorized modification including software modifications such as the installation of custom firmware. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE, NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE AT DISTRIBUTOR’S SOLE DISCRETION ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS. SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING. CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.

Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies.

2023 SANRIO CO., LTD.
Used Under License.
www.sanrio.com

All product names, trademarks, and registered trademarks are property of their respective owners. All company, product, and service names used in this document are for identification purposes only. Use of these names, trademarks, and brands does not imply endorsement.

Printed in China Designed in the U.S. v1. 08/2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>