HELLO KITTY V5.3 True Wireless Stereo Earbuds With Charging Case User Manual

June 17, 2024
HELLO KITTY

HELLO KITTY V5.3 True Wireless Stereo Earbuds With Charging Case User Manual

WAHT IN THE BOX

  • EAR TIPS (3 PAIRS)

  • TRUE WIRELESS STEREO EARBUDS

  • TYPE-C TO USB-A CHARGING CABLE

  • CHARGING CASE

  • USER’S MANUAL

PRODUCT PARTS

PRODUCT PARTS

Active the earbuds from shipping & warehousing mode to normal mode

  1. Remove earbuds from package, remove the blue color stickers on earbuds;
  2. Put earbuds in charging case to active the earbuds changing from warehousing mode changing to using mode.

Power ON

Take the earbuds from charging case, the earbuds will turn on automatically. In the OFF state, press and hold the ‘touch area’ of the earbuds for 3 seconds, the earbuds will turn ON, and you can hear the prompt ‘power ON’.

Power OFF

There are 3 ways to turn your earbuds OFF

  1. Place the earbuds into the charging case, and they will turn OFF automatically
  2. Hold your finger on the touch area of the earbud for 4 seconds
  3. Turn OFF Bluetooth on your device, and the earbuds will turn OFF shortly.

BLUETOOTH MATCHING

  1. Place earbuds in charging case, and make sure both earbud LEDs turn white.
  2. Remove earbuds from charging case. This will automatically put them in pairing mode. (Note: only the left bud will flash white and green.)
  3. Open your list of available Bluetooth devices and select “HELLO KITTY TWS”. Earbud LEDs will turn off when connected. Be sure to select “Pair” or “OK” when you see the Bluetooth pairing request.
  4. Once the earbuds have been successfully paired with your device for the first time, they will automatically connect there after when removed from the case within the vicinity of the device.

Voice assistant
Touch the left or right earbuds two times gently.

Call

  1. Answer a call: Touch the left or right earbuds once gently earbuds twice gently
  2. Hanging up : Touch the left or right 3. Reject a call: Press and hold the left or right earbuds for 2 seconds

Listen to the music

  1. Play/Pause: Touch the left or right earbuds twice gently
  2. Previous: Press and hold the touch area of the right earbuds for 2 seconds
  3. Volume+: Touch the right earbuds once gently
  4. Volume-: Touch the left earbuds once gently

Charge
Earbuds: Put the earbuds into the charging case and the earbuds will display a white light while charging. Charging case: plug the small end of the USB cable into the USB-C port of the charging case. Plug the other end into a USB wall charger or computer (DC 5V) that is powered on.

Specifications

BLUETOOTH : V5.3
BATTERY: 30 mAh 2 earbuds, 250 mAh charging case
TALKING TIME: 3h at 100% voice volume
MUSIC PLAY TIME: 4h at 100% voice volume
FREQUENCY : 20HZ-20KHZ
CHARGING TIME : 1h
STANDBY TIME : 180 days
CHARGING PORT : Type-C
TRANSMISSION DISTANCE : 10m+
IMPEDANCE: 32 Ω
WATERPROOF: IPX4
CHARGING VOLTAGE : DC 5V
DRIVER UNIT: 13mm

Earbuds indicator

Status Indicator light
No pairing White and green lights
The earbuds are paired with each other White and green lights
Successfully paired with the phone The indicator light is OFF
Power ON White and green light up
Power OFF Indicator light OFF
Incoming call The indicator light is OFF
Charging case indicator Status Indicator light
Charging Earbuds charging White light flash quickly When put the earbuds into
Charging finishing white light will turn off after 8 seconds.
Power shortage will flash quickly for 4 seconds and then light OFF.

Precautions:

  • Try to listen at low volume. Listening at high volume for an extended period may result in permanent damage to your hearing.
  • The use of earbuds will impair you ability to hear other sounds, use caution while using your earbuds during any activity that requires your full attention.
  • This package contains small parts that may be hazardous to children and should be kept out of reach of children. Children should use the earbuds under the supervision of adult.
  • Do not overuse the earbuds or put them under heavy pressure.
  • Keep the product dry, do not put it in humid circumstance to avoid short circuit.
  • Using your earbuds in a moist or dusty environment, or near a strong magnetic field, may result in an internal circuit failure.
  • Do not store your earbuds in an environment where the temperature is below-15°C or above +50°C
  • Do not charge the earbuds and the charging case in an environment where the temperature is below 0°C.
  • Do not expose your earbuds or charging case to direct sunlight (such as on a window sill or on a car dashboard) for an extended period of time.
  • Keep away from router or other high-frequency transmitting equipment to prevent interruption of signal receiving.
  • To avoid damaging to your earbuds, do not disassemble or tamper with them, and do not insert any foreign matter into them.
  • Do not attempt to take apart the product, especially non-professionals.
  • Do not drop, strongly vibrate, or strike the product with hard objects to avoid damaging the intermale circuit.
  • Do not use drastic chemicals or cleaner to clean the product. Do not us sharp objects to scratch the surface.

FCC ID: 2BBN9-001

Symbols Explanation
DC Voltage
To prevent possible hearing damage, do not listen at high volume levels for

long periods
| RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give their product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment
| Product complies with the European Safety Regulations

Made in China

Designed in France. Made in China.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Company logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HELLO KITTY User Manuals

Related Manuals