EPOMAKER HI75 75 Percent Wired Hot Swappable RGB Mechanical Keyboard Barebones Kit User Guide

: June 21, 2024
: EPOMAKER

Table of Contents

EPOMAKER HI75 75 Percent Wired Hot Swappable RGB Mechanical Keyboard
EPOMAKER X LEOBOG HI75
BASIC FUNCTION
KNOB FUNCTIONS
INDICATOR LIGHT
REPLACING KEYCAPS AND SWITCHES
Remove Switches
TECHNICAL ASSISTANCE
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EPOMAKER HI75 75 Percent Wired Hot Swappable RGB Mechanical Keyboard

Barebones Kit

Specifications

BRAND	EPOMAKER x LEOBOG Hi75
MODEL	75% Wired Hot-swappable RGB Mechanical Keyboard Barebones

Reset the Keyboard: Press and hold FN + ESC for 3 seconds to reset the keyboard to factory settings.

Replacing Keycaps and Switches: For a full guide on how to remove keycaps and switches, scan the QR Code or visit this link: DIY Guide – How to Remove and Replace Your Mechanical Keyboard Switches

Before installing switches:

Ensure the pins are clean and straight.
Push straight down to align the pins with the slots.

EPOMAKER X LEOBOG HI75

75% Wired Hot-swappable RGB Mechanical Keyboard Barebones Kit

Should you require more assistance please email us at support@epomaker.com

BASIC FUNCTION

LIGHT EFFECTS

KNOB FUNCTIONS

(Press Knob for 3-5s to switch between Gaming Mode and Oﬃce Mode)

INDICATOR LIGHT

REPLACING KEYCAPS AND SWITCHES

For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to- remove-and-replace-your-mechanical-keyboard-switches

Before installing switches, be sure the pins are clean and straight.

Push Straight Down

Please be gentle. Be sure the pins are aligned with the slots.

Remove Switches

Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
Using firm but gentle force pull the switch away from the keyboard using a vertical motion.

The Switch Puller tool aligns Vertically to the Switch to unclip the plastic securing the switch to the plate.

Install Switches

Check that all the switch metallic pins are perfectly straight and clean.
Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
Inspect the switch to ensure it’s properly attached to your keyboard, and test it.

Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.

TECHNICAL ASSISTANCE

For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.

COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.

https://discord.gg/2q3Z7C2
https://www.reddit.com/r/Epomaker/

WARRANTY

EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker.
We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc.
We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.