SIGNATURE HARDWARE 948023 Angle Supply Kit for Toilets Instruction Manual
- June 21, 2024
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE 948023 Angle Supply Kit for Toilets
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, countertop, or for personal injury during installation. Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team via live chat at www.signaturehard- ware.com or by emailing support @signaturehard-ware.com.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for
the installation.
ADDITIONAL QUESTIONS?
Still need help? Check out our Help Center at
www.signaturehardware.com for product and
warranty information, or contact us through live chat or by emailing support
@signaturehard-ware.com.
TOOLS AND MATERIALS
- Adjustable Wrench
- Safety Glasses
INSTALLATION
Ensure the water is shut off before installation. Clean & deburr pipe before installation. Make sure the tube is cut so it is squared and not out of round. Test installation before leaving job site.
INLET
COMPRESSION (COPPER)
For use on type M or type L copper only
- Do not use thread sealant on compression threads.
- Place compression nut and then brass sleeve on tubing.
- Insert the copper tube into the valve and tighten the compression nut firmly using an adjustable wrench.
OUTLET
COMPRESSION (COPPER)
For use on type M or type L copper only.
- Do not use thread sealant on compression threads.
- Place compression nut and then brass sleeve on tubing.
- Insert the copper tube into valve and tighten compres-sion nut firmly using an adjustable wrench.
- 1.855.715.1800
- signaturehardware.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>