SIGNATURE HARDWARE VAN NOORD 453851 Pendant Instruction Manual

: June 8, 2024
: Signature Hardware

Table of Contents

VAN NOORD 453851 Pendant
GETTING STARTED
ADDITIONAL QUESTIONS?
FOR YOUR SAFETY
CARE INSTRUCTIONS
TOOLS AND MATERIALS:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VAN NOORD 453851 Pendant
Instruction Manual

VAN NOORD PENDANT COLGANTE
LUMINAIRE SUSPENDU
SKU: 453851

VAN NOORD 453851 Pendant

BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing electric ﬁxtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, counter top, or for personal injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team via live chat at www.signaturehardware.com or by emailing support@siganturehardware.com.

GETTING STARTED

Ensure that you have gathered all the required materials that are needed for the installation.

ADDITIONAL QUESTIONS?

Still need help? Check out our Help Center at www.signaturehardware.com for product and warranty information, or contact us through live chat or by emailing support@signaturehardware.com.

FOR YOUR SAFETY

WARNING: Be sure the electricity to the wires you are working on is shut oﬀ, either the fuse is removed or the circuit breaker is shut oﬀ. You don’t need special tools to install this ﬁxture. Be sure to follow the steps in the order given. Under no circumstances should a ﬁxture be hung on house electrical wires, nor should a swag type ﬁxture be installed on a ceiling which contains a radiant type heating system. Read instructions carefully. If you are unclear as to how to proceed, consult a qualiﬁed electrician.

CARE INSTRUCTIONS

To clean, wipe ﬁxture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.

TOOLS AND MATERIALS:

SIGNATURE HARDWARE VAN NOORD 453851 Pendant - fig 1 SAVE THIS MANUAL: RETAIN FOR CONSUMER’S USE. READ THESE INSTRUCTIONS COMPLETELY BEFORE
INSTALLING THE PRODUCT: FOR PRODUCT OR INSTALLATION QUESTIONS PLEASE CALL
CUSTOMER SERVICE AT 1-800-221-3379.
INSTALLATION (FIG 1)

Slip center column assembly (L) along wire and thread onto nipple (M).
Place the saddle (U) of shade (N) on the Round iron sheet (P), and secure with the screws (O).
Slip center hole of decorative glass (S) over candle sleeve (T).
Install light bulbs (Not provided). Please do not exceed the maximum wattage capacity recommended on the socket.
Attach the glass ball (Q) to hole (R) from Main body bottom.

INSTALLATION (FIG 2) SIGNATURE HARDWARE VAN NOORD 453851 Pendant - fig
4

Secure the mounting bar (A) to outlet box with the outlet box screws (B). Thread the nut (D) onto the nipple (E) so that ﬁve threads are exposed above the nut (D). Insert the lock washer (C) and thread the nipple (E) into the mounting bar (A), then secure with the nut (D).
Thread the screw collar (G) onto the nipple (E). Slide the screw collar ring (H) and the canopy (F) over the chain (J). Open one link of chain (J), connect it to ﬁxture loop (K) and close the link, then use quick link (I) to connect collar loop (G) and the top of chain (J).
BE SURE TO CLOSE ALL CHAIN LINKS COMPLETELY.
Lace wires up through chain (I) and pas wires through holes in collar loop (H). We recommend lacing wire up through every other link of chain (I).
Please note: The ribbed wire will be a neutral wire, and the smooth wire will be a lead wire. The smooth wire will also have a printed temperature warning. Read instructions carefully. If you are unclear as to how to proceed, consult a qualiﬁed electrician.
Connect the white wire from the outlet box to the neutral wire (ribbed) from the ﬁxture and the black wire from the outlet box to the lead wire (smooth) from the ﬁxture. Cover the two wire connections using the two provided wire connectors. Wrap the two wire connections with electrical tape for a more secure connection. Connect the copper ground wires from the ﬁxture and from the outlet box to the ground screw on the mounting bar.
Note: If you have electrical questions, consult your local electrical code for approved grounding methods.
After wires are connected, tuck them carefully inside outlet box. place the canopy (F) on the ceiling and secure collar ring (H).