SIGNATURE HARDWARE 948019 Compression Knob Angle Supply Stop Valve in Polished Brass Instruction Manual
- June 1, 2024
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE 948019 Compression Knob Angle Supply Stop Valve in
Polished Brass Instruction Manual
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing
plumbing �xtures. Signature Hardware accepts no liability for any damage to
the faucet, plumbing, sink, counter top, or for personal injury during
installation.
Observe all local plumbing and building codes. Unpack and inspect the product
for shipping damage.
If any damage is found, contact our Customer Relations team via live chat at
www.signaturehardware.com or by emailing
[email protected].
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for
the installation.
ADDITIONAL QUESTIONS?
Still need help? Check out our Help Center at www.signaturehardware.com for
product and warranty information, or contact us through live chat or by
emailing
[email protected].
TOOLS AND MATERIALS:
**Adjustable Wrench
**
INSTALLATION
- Turn off water supply.
- Slide flange over nipple to cover rough opening in wall. Internal fingers of flange pinch together to insure tight fit.
- Cover wrench pads on shut-off valve with tape to protect finish.
- Slip nut and ferrule over copper pipe. Tighten onto valve.
