ecler MIA Series Commercial Loudspeakers User Manual

: June 20, 2024
: ecler

Table of Contents

PRECAUTIONS
WARRANTY & ENVIRONMENT
PACKAGE CONTENTS
DESCRIPTION & FEATURES
IMPEDANCE SELECTOR
CONNECTIONS
EQ SETTINGS
RECOMMENDED AMPLIFIER
POSITIONING & INSTALLATION
TECHNICAL DATA
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**ecler MIA Series Commercial Loudspeakers User Manual

**

PRECAUTIONS

Important Notice

WARNING: SHOCK HAZARD – DO NOT OPEN

Symbols

The flashing light with an arrowhead symbol inside an equilateral triangle on it is intended to alert the user of the presence of non-insulated “dangerous voltage” within the enclosure, which might be of sufficient magnitude to pose a risk of electric shock to users.

The exclamation mark within an equilateral triangle is intended to alert the user of the requirement for important operating and maintenance (servicing), for which instructions may be found in the literature accompanying the appliance.

WARNING (If applicable): Terminals marked with symbol “ ” may be of sufficient magnitude to pose a risk of electric shock. The external wiring connected to terminals requires installation by a technician, or the use of ready-made leads or cords.

WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or humidity.

WARNING: A device with Class I manufacturing ought to be connected to a mains socket outlet with a protective earthing connection.

WARNING: Ecler products have a long lifetime of more than 10 years. This product must never be discarded as unsorted urban waste, but must be taken to the nearest electrical and electronic waste treatment centre.

Key Safety Directions

Read the following directions.
Keep the following directions.
Heed all warnings.
Follow all directions.
Do not use this device in proximity to water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that may release heat.
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades, being one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, contact a qualified electrician for a replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at the plugs, convenience receptacles, and at the point of exit from the device.
Only use attachments/accessories specified by the manufacturer.
Unplug the device during lightening sorts or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the device has been damaged in any way, such as power supply cord or plug damage, liquid spillage or objects onto the device, the device has been exposed to rain or humidity, does not operate normally, or has been dropped.
Disconnecting from mains: When switching off the POWER switch, all the functions and light indicators of the unit will be stopped, but fully disconnecting the device from mains is done by unplugging the power cable from the mains input socket, therefore, it should always remain easily accessible
Equipment is connected to a socketoutlet with an earthing connection by means of a power cord.
The marking information is located at the bottom of the unit.
The device shall not be exposed to dripping or splashing liquids, and no liquid-filled objects, such as a filled up glass, shall be placed on top of the device.

Cleaning Directions

Clean the unit with a soft, dry clean cloth or slightly wet with water and neutral liquid soap only, then dry it with a clean cloth. Be careful that water never gets into the unit through any hole. Never use alcohol, benzine, solvents or abrasive substances to clean this unit.

NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may be caused to people, animal, or objects due to failure to comply with the warnings above.

WARRANTY & ENVIRONMENT

Thank you for choosing our Ecler MIA Series!
We greatly value your trust.

It is VERY IMPORTANT to carefully read this manual and to fully understand its contents before any connecting takes place in order to make the best use of this equipment, as well as to get the best performance from it.

To ensure optimal operation of this device, we strongly recommend that its maintenance be carried out by our authorised Technical Services.

All ECLER products are covered by warranty, please refer to www.ecler.com or the warranty card included with this product for the period of validity and conditions.

Ecler is truly committed with the environment and planet sustainability, energy saving and CO2 emission reduction. Recycling materials and using non- contaminant components are also top priorities in our green crusade.

Ecler has deeply evaluated and analyzed the environmental impacts of all the processes involved in the production of this product, including packaging, and has alleviated, reduced and/or compensated for them.

PACKAGE CONTENTS

1 MIA Series unit.
1 FLATY wall-mount bracket for MIA-81, or
1 HANDY wall-mount bracket for MIA-82
2x Euroblock connector
First Steps Guide.
Warranty card.

DESCRIPTION & FEATURES

MIA Series is a family of elegant, unique and compact design column loudspeakers, built in a single aluminium piece to avoid vibrations and mechanical stress.

MIA-81 includes 8×1.5” drivers with an RMS rating of 40W and MIA-82 includes 8×2.5” drivers with an RMS rating of 150W. Both models behave as a mini line array with the disposition of 8 drivers per column and the possibility of working in 16 Ω or 64 Ω by selecting them behind the logo without the need to remove the grille.

MIA Series are available in black and white colour, are IP44 graded ready for outdoor applications.

As a highlight, a stainless-steel wall-mount bracket is included for height adjustment at any point along the length of the column. MIA-81 includes the FLATY bracket that allows the column to be mounted against the wall and MIA-82 includes the incredibly versatile HANDY wall-mount smart pan and tilt bracket.

Main Features

Column passive loudspeaker for surface mounting.
Possibility of working in 16 Ω or 64 Ω by selecting them behind the logo without the need to remove the grille.
Aluminium one-piece non resonant compact enclosure.
Stack Output.
FLATY bracket allows the column to be mounted against the wall (MIA-81).
HANDY wall-mount versatile pan and tilt bracket included (MIA-82).
Weather-protected with IP44 rating.
Available in white (RAL9003) and black (RAL9005).
EASE files available.

IMPEDANCE SELECTOR

MIA Series has 2 impedance options (16Ω and 64Ω) to install more or less speakers in parallel.
In this matter, it has a 2-position switch on its front panel (behind the logo) that allows to select its working mode without removing the grill.

Impedance Selector

CONNECTIONS

The connection cables which connect the amplifiers output and the speaker should be of good quality, have sufficient conductor area and be as short as possible. The latter fact is especially important when the distance is long and the load impedance is 16 Ω. A cross-section of at least 2.5mm2 is recommended for distances up to 10m; 4 or 6mm2 for longer distances. Following formula gives the required section, assuming 4% losses:

Cross section in mm2 = Length in m/Loudspeaker impedance in Ω

High Impedance Amplifiers

MIA-81 is not compatible with High Impedance amplifiers.
MIA-82 switched to 64 Ohm can be connected to a High Impedance amplifier.
Consider MIA-82 as a 160W loudspeaker in a 100V line and a 80W loudspeaker in a 70V line.

Always respect the polarity. The loudspeaker has an INPUT Euroblock connector, and a second STACK Euroblock connector thereby facilitating the parallel connection of speaker.

See detailed connections diagram on next page.

Connections Diagram

Connections Diagram

EQ SETTINGS

Download the Ecler Loudspeakers EQ Settings file ready to import in EclerNet Manager software

RECOMMENDED AMPLIFIER

The output power of the recommended amplifier for MIA-81 is 80W RMS and for MIA-82 is 300W RMS.

POSITIONING & INSTALLATION

Positioning

Consider following general rules.

Place the speaker on a solid and firm surface. No obstacles should stand between the enclosures and the audience. The high frequencies are very directive compared to the low frequencies, so that any obstacle will impair their response. In case large audiences must be addressed, a better long distance sound propagation will be achieved if the enclosures are flown high enough.

Download all EASE files by clicking on the image:

Installation

MIA Series loudspeakers include a wall-mount bracket.

MIA-81 includes a FLATY wall-mount bracket that allows the column to be mounted against the wall.
MIA-82 includes the incredibly versatile HANDY wall-mount smart pan and tilt bracket.

Both brackets are made out of stainless-steel and permits adjusting the height at any point of the length of the column.

See detailed installation diagram on next page.

MIA-81: FLATY Wall-Mount Bracket Installation Diagram

Bracket Installation Diagram

MIA-82: HANDY Wall-Mount Bracket Installation Diagram

Bracket Installation Diagram

Assembling 2 MIA units by using FLATY Wall-Mount bracket

TECHNICAL DATA

Technical Specifications

MIA-81

SYSTEM

MIA-82

SYSTEM

below the sound pressure level at specified sensitivity.
6dB below the sound pressure level than that at the direction of maximum level, Max. angle between 1 kHz and 4 kHz.
Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.
Calculated from sensitivity and power handling specifications, exclusive of power compression

Mechanical Diagram

MIA-81

All measurements are in mm.

Mechanical Diagram

MIA-82

All measurements are in mm.

Mechanical Diagram

All product characteristics are subject to variation due to production tolerances.
NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.
For technical queries contact your supplier, distributor or complete the contact form on our website,
in Support / Technical requests.
Motors, 166‐168 | 08038 Barcelona, Spain | Tel. (+34) 932238403 | information@ecler.com | www.ecler.com