ecler NIMBO-26 Top Performance Cabinet Loudspeaker User Manual

ecler NIMBO-26 Top Performance Cabinet Loudspeaker

Specifications

• Product Name: NIMBO-26 Loudspeakers
• Type: Top Performance Cabinet Loudspeaker
• Model Number: 50-0442-0101

Product Information

Precautions

• Ensure to follow the safety precautions provided in the user manual to prevent any risks of electric shock or damage to the equipment.
• This includes keeping the device away from water, using specified accessories, and unplugging it during lightning storms or long periods of non-use.

Warranty & Environment

• Refer to the warranty information for details on coverage.
• Proper disposal at an electronic waste treatment center is recommended after use to protect the environment.

Package Contents

• Check the package contents to ensure all components are included before installation.

Description & Features

• Explore the main features of the NIMBO-26 loudspeakers for optimal performance.

Connections

• Follow the connection guidelines provided in the user manual to set up the speakers correctly.

Impedance Selector

• Adjust the impedance selector according to your setup requirements for the best audio quality.

EQ Settings

• Configure the EQ settings as per your preferences to customize the sound output.

Recommended Amplifier

• Use the recommended amplifier to ensure compatibility and efficient performance.

Positioning & Installation

• Properly position and install the NIMBO-26 speakers for optimal sound dispersion and quality.

Technical Data

• Refer to the technical data section for detailed specifications and performance metrics of the loudspeakers.
• For detailed instructions on setup, usage, and maintenance, refer to the user manual provided with the product.

FAQ

Q: What should I do if the device has been damaged?

• A: If the device has been damaged in any way, such as power supply cord damage, exposure to liquid or humidity, or not operating normally, refer servicing to qualified personnel immediately.

PRECAUTIONS

Important Notice

• CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
• The flashing light with an arrowhead symbol inside an equilateral triangle is intended to alert the user of the presence of non-insulated “dangerous voltage” within the enclosure, which might be of sufficient magnitude to pose a risk of electric shock to users.
• The exclamation mark within an equilateral triangle is intended to alert the user of the requirement for important operating and maintenance (servicing), for which instructions may be found in the literature accompanying the appliance.
• WARNING (If applicable): Terminals marked with the symbol may be of sufficient magnitude to pose a risk of electric shock.
• The external wiring connected to terminals requires installation by a technician, or the use of ready-made leads or cords.
• WARNING: To prevent fire or shock hazards, do not expose this equipment to rain or humidity.
• WARNING: A device with Class I manufacturing ought to be connected to a main socket outlet with a protective earthing connection.
• WARNING: Ecler products have a long lifetime of more than 10 years. This product must never be discarded as unsorted urban waste but must be taken to the nearest electrical and electronic waste treatment center.

Key Safety Directions

1. Read the following directions.
2. Keep the following directions.
3. Heed all warnings.
4. Follow all directions.
5. Do not use this device in proximity to water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install under the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that may release heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, being one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, contact a qualified electrician for a replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at the plugs, convenience receptacles, and at the point of exit from the device.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug the device during lightening sorts or when unused for long periods.
13. Refer all servicing to qualified personnel. Servicing is required when the device has been damaged in any way, such as power supply cord or plug damage, liquid spillage, or objects onto the device, the device has been exposed to rain or humidity, does not operate normally, or has been dropped.
14. Disconnecting from mains: When switching off the POWER switch, all the functions and light indicators of the unit will be stopped, but fully disconnecting the device from mains is done by unplugging the power cable from the mains input socket, therefore, it should always remain easily accessible
15. Equipment is connected to a socket outlet with an earthing connection through a power cord.
16. The marking information is located at the bottom of the unit.
17. The device shall not be exposed to dripping or splashing liquids, and no liquid-filled objects, such as a filled-up glass, shall be placed on top of the device.

Cleaning Directions

• Clean the unit with a soft, dry clean cloth or slightly wet with water and neutral liquid soap only, then dry it with a clean cloth.
• Be careful that water never gets into the unit through any hole. Never use alcohol, benzine, solvents or abrasive substances to clean this unit.
• NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may be caused to people, animals, or objects due to failure to comply with the warnings above.

WARRANTY & ENVIRONMENT

• Thank you for choosing our Ecler NIMBO-26!
• We greatly value your trust.
• It is VERY IMPORTANT to carefully read this manual and to fully understand its contents before any connecting takes place to make the best use of this equipment, as well as to get the best performance from it.
• To ensure optimal operation of this device, we strongly recommend that its maintenance be carried out by our authorized Technical Services.
• All ECLER products are covered by warranty, please refer to www.ecler.com or the warranty card included with this product for the period of validity and conditions.
• Ecler is truly committed to the environment and planet sustainability, energy saving, and CO2 emission reduction. Recycling materials and using non-contaminant components are also top priorities in our green crusade.
• Ecler has deeply evaluated and analyzed the environmental impacts of all the processes involved in the production of this product, including packaging, and has alleviated, reduced, and/or compensated for them.

PACKAGE CONTENTS

• 1 x NIMBO-26 loudspeaker.
• 1 x VEASY wall bracket with vertical and horizontal adjustment (VESA compatible).
• 2x Euroblock.
• First Steps Guide.
• Warranty card.

DESCRIPTION & FEATURES

• NIMBO-26 is a premium performance 2-way passive loudspeaker with 140W RMS power, in a compact size with extended low frequency response. Suitable for outdoor applications, with a cloud-inspired design, the result of Euler’s engineering skills and the collaboration of architects and interior designers.
• Including 2 x 6.5″ woofers and a 1″ silk tweeter located in the acoustic center, acting as a single-point source to disperse the sound evenly.
• The nominal impedance of the speaker can be selected to 4 ohms or 16-ohm thanks to the front switch located behind the logo, which allows modifying its impedance without removing the aluminum front grille.
• It includes the robust VEASY wall bracket, allowing tilt and pan adjustment using a single screw.

Main Features

• 2-way passive loudspeaker for surface and ceiling mounting.
• 2x 6.5″ woofers with 4-layer voice coil improve power handling and low-frequency response.
• 1″ silk tweeter with neodymium magnet and ferrofluid.
• Glass-fibre reinforced ABS non-resonant compact enclosure.
• Wide dispersion pattern.
• VEASY bracket compatible with VESA 100 included. Quick and easy to install, including jumps and markings for repeating speaker orientation.
• Weather-protected with an IP-44 rating.
• Available in white (RAL9003), black (RAL9005), and gold color (RAL1036, approx.)
• RAL paint customization was available.

CONNECTIONS

• The connection cables that connect the amplifier output and the speaker should be of good quality, have sufficient conductor area, and be as short as possible.
• The latter fact is especially important when the distance is long and the load impedance low (4-16 Ω). A cross-section of at least 2.5mm2 is recommended for distances up to 10m; 4 or 6mm2 for longer distances.
• The following formula gives the required section, assuming 4% losses: Cross section in mm2=Length in loudspeaker impedance in Ω
• Always respect the polarity. The loudspeaker has an INPUT Euroblock connector, and a second STACK Euroblock connector thereby facilitating the parallel connection of the speaker.
• See the detailed connections diagram on the next page.

Connections Diagram

IMPEDANCE SELECTOR

NIMBO-26 works in low-impedance operations. In this matter, it has a 2-position switch on its front panel (behind the logo) that allows it to select its working mode without removing the grill.

EQ SETTINGS

• Download the Ecler Loudspeakers EQ Settings file ready to import in EclerNet Manager software.

RECOMMENDED AMPLIFIER

Positioning Consider following general rules.

• Place the speaker on a solid and firm surface. No obstacles should stand between the enclosures and the audience.
• The high frequencies are very directive compared to the low frequencies so any obstacle will impair their response.
• In case large audiences must be addressed, better long-distance sound propagation will be achieved if the enclosures are flown high enough.
• Download all EASE files by clicking on the image:

Installation

• NIMBO-26 loudspeaker includes the VEASY wall bracket, is VESA 100 compatible, and is easy to install.
• The robust VEASY wall bracket, allow tilt and pan adjustment using a single screw.
• Quick and easy to install, including jumps and markings for repeating speaker orientation.
• See the detailed installation diagram on the next page.

Installation Diagram

Mounting the VEASY wall bracket

TECHNICAL DATA

Technical Specifications

NIMBO-26|
---|---
SYSTEM|
Effective Freq. Range 1| 60Hz-20kHz (-10dB)
Coverage angle 2| 210° x 228° (HxV)
Power handling| 140W RMS / 560 W Peak
Sensitivity 3| 92 db (1W/1m)
Maximum SPL 4| 113 dB continuous / 119 dB peak
Recommended amplifier power| 280W RMS
TRANSDUCERS|
Ways| 2-ways full range
Low-frequency driver| 2 x 6.5″ Woofer
High frecuency driver| 1″ Silk Dome Tweeter
Nominal impedance| 4Ω / 16Ω
FILTERS|
Crossover filter| 1,65 KHz
PHYSICAL|
Connection type| Double INPUT/LINK connector, Euroblock type
Power type selector| Front selection by toggle switch
Installation options| Surface / Wall mounting
Environmental| IP44
Enclosure material| ABS reinforced with fiberglass
Grille material| Aluminium
Grille fixing system| Pressure mount system
Mounting system| Stainless Steel VEASY bracket
Operating temperature| Min: 0°C; 32°F

Max: 35°C; 95°F

Operating humidity| <85% HR
Storage temperature| Min: -10°C ; 14°F

Max: 50°C; 122°F

Storage humidity| <90% HR
Included accessories| Wall-mount bracket, 2x Euroblock connector
Finished colour| White (RAL9003), Black (RAL9005) or

Gold (RAL1036, approx.)

Dimensions (WxHxD)| 542.5 x 261 x 269 mm / 21.36 x 10.28 x 10.59 in.
Weight| 8.5 kg / 18.74 lb
Pieces per box| 1
Shipping dimensions (WxHxD)| 640 x 445 x 390 mm / 25.20 x 17.72 x 15.35 in.
Shipping weight| 12.6 kg / 27.78 lb

1. below the sound pressure level at the specified sensitivity.
2. 6dB below the sound pressure level than that at the direction of maximum level, Max. angle between 1 kHz and 4 kHz.
3. Measured on-axis, far field, and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.
4. Calculated from sensitivity and power handling specifications, exclusive of power compression.

Mechanical Diagram

All measurements are in mm

• All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.
• For technical queries contact your supplier, or distributor or complete the contact form on our website, in Support / Technical requests.
• Motor s, 166‐168
• 08038 Barcelona, Spain
• (+34) 932238403
• information@ecler.com
• www.ecler.com

Documents / Resources

| ecler NIMBO-26 Top Performance Cabinet Loudspeaker [pdf] User Manual
NIMBO-26 Top Performance Cabinet Loudspeaker, NIMBO-26, Top Performance Cabinet Loudspeaker, Performance Cabinet Loudspeaker, Cabinet Loudspeaker, Loudspeaker
---|---
| ecler NIMBO-26 Top Performance Cabinet Loudspeaker [pdf] User Manual
NIMBO-26 Top Performance Cabinet Loudspeaker, NIMBO-26, Top Performance Cabinet Loudspeaker, Performance Cabinet Loudspeaker, Cabinet Loudspeaker, Loudspeaker

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>