FINDER TX01 Portable Locator Device User Guide

FINDER TX01 Portable Locator Device

Specifications:

• Product Name: Portable Locator Device
• Compatibility: Works with Apple’s Find My network
• Battery Type: CR2032 coin-shaped battery
• Power On: Hold button for approximately 2 seconds until a single beep is heard
• Power Off: Hold button until a single beep, followed by two consecutive beeps, and then three continuous beeps
• Important Note: Ensure correct negative and positive battery connections for replacement

Product Usage Instructions

Power On/Off:

To power on the device, hold the button for about 2 seconds until a single beep is heard. To power off, hold the button until you hear a series of beeps.

How to Pair:

1. Place the Finder next to your Apple device like iPhone.
2. Turn on Bluetooth on iPhone and connect to the internet.
3. Press the Finder side button to power on.
4. Open the ‘Find My’ app on your Apple device.
5. In the ‘Find My’ app, click on Add Item – Other Support Items.
6. Follow the on-screen instructions to complete the pairing process.

Battery Replacement:

1. Twist to open the back cover of the Finder.
2. Replace the old CR2032 battery with a new one.
3. Twist to close the back cover securely.

Important Handling Guidelines:

Handle the Finder with care to avoid damage. Clean it using a soft, dry, lint- free cloth. Do not expose it to extreme conditions or liquids.

FAQ

Q: What should I do if my Finder is interfering with my medical device?

A: If you suspect interference with a pacemaker or medical device, discontinue use immediately and seek medical advice.

Q: How do I clean my Finder?

A: Use a soft, dry cloth to clean the Finder. Avoid using sharp objects or abrasive materials.

Overview introduction

FINDER integrates with Apple’s Find My network, providing a secure and user- friendly solution for tracking belongings. It effortlessly locates keys, wallets, and more using Apple Find My Network, prioritizing security. Designed for user convenience, FINDER simplifies daily life. Say goodbye to lost items with FINDER and Apple’s Find My network, experiencing a future of enhanced item tracking and peace of mind. Trust FINDER to redefine how you manage essentials effortlessly

Power On
Hold the button (approximately 2s) and release until a single beep heard, indicating the device is powering on.

Power Off
Hold the button until you hear a single beep,followed by two consecutive beeps,and then three continuous beeps. Release the button after hearing the continuous three beeps (approximately 6 seconds),indicating the device is powering off.

HOW TO PAIR
Note: iOS or macOS with the latest version.

1. Place the FINDER next to your Apple device like iPhone.
2. Turn on Bluetooth on iPhone and connect to Internet.
3. Press the finder side button, hear one beep to power on.
4. Open the ‘Find My’ app as shown in Figure 1
5. In ‘Find My’ app, click on Add Item – Other Support Items. As shown in Figure 2
6. Click ‘Continue’. As shown in Figure 3
7. Name your Finder and click ‘Continue’. As shown in Figure 4 1.8 Select emoticons.
8. Click ‘Continue’, then click ‘Finish’ to complete.

Battery

FINDER Contains a coin shaped battery. During the product’s lifespan, it may be necessary to replace the battery. By observing the correct negative and positive connections, only replace batteries of the same type (CR2032) and rating.

Battery replacement:

1. Twist to open the back cover.
2. Replace a new battery.
3. Twist to close the back cover.

ADDITIONAL TIPS

1. To switch from active mode to Disable mode (Airplane mode), simply remove the battery.
2. To switch from Disable mode (Airplane mode) to working mode, reinstall the battery. The FINDER will be successfully paired after this.
3. Press and hold the button until you hear 1 prompt tone, followed by 2 consecutive prompt tones, and then 3 consecutive indicator tones. Continue to press for 5 seconds. When you hear a long indicator tone, release the button to restore the device to its factory settings..
4. To remove the FINDER from your Apple devices, open the Find My app, select ‘items,’ find the device, and scroll down to click on ‘Remove this device.
5. If the FINDER fails to connect to the Find My app, follow the instructions in section 3.3 to perform a factory reset, and then restart the pairing process.

Important matters

The FINDER contains delicate electronic parts, including a battery. To avoid damage, loss of function, or potential harm, please refrain from dropping, hitting, puncturing, crushing, disassembling, exposing it to extreme heat or liquids, or placing it in areas with a high concentration of industrial chemicals.

WARNING

• INGESTION HAZARD: This product contains a button cell or coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of CHILDREN
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

Choking Hazard Warning
The FINDER, its battery compartment door, the battery itself, and the case may pose a choking hazard or cause injury to small children. Please keep these items out of reach of young children

Medical Device Interference
The FINDER contains components and radios that emit electromagnetic fields, as well as magnets. These elements may potentially interfere with pacemakers, defibrillators, or other medical devices. To ensure safety, maintain a safe distance between your medical device and the FINDER. We strongly advise consulting your physician and the manufacturer of your medical device for information that is specific to your situation. If you suspect that the FINDER is interfering with your pacemaker, defibrillator, or any other medical device, discontinue its use immediately.

Important Handling Guidelines
It’s normal for the FINDER to show discoloration with regular use. To clean it, use a soft, dry, lint-free cloth. Avoid applying
pressure with sharp objects on the rubber seal or the battery terminal contacts inside the device.
Do not allow moisture to enter any openings or use aerosol sprays, solvents, or abrasive materials to clean the device.

Legal notice
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

FCC

FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>