LIGHTPRO 218A Wi-Fi Camera Smart Online Kopen User Manual
- June 19, 2024
- LiGHTPRO
Table of Contents
Camera
218A
User manual
Produced by
TECHMAR B.V. | CHOPINSTRAAT 10 | 7557 EH HENGELO | THE NETHERLANDS
+31 (0)88 43 44 517 | [email protected] |
WWW.LIGHTPRO.NL
218A Wi-Fi Camera Smart Online Kopen
SMART
Start immediately:
- Download the apphttps://qrco.de/beGoAt
- Install the Camera
Note: Make sure that your WiFi router is set on 2.4GHz. If your router is set on 5GHz, then you need to change your network’s Wi-Fi frequency to 2.4 GHz in the settings menu of the router. Please log into your router or contact your internet provider for this.
The system
Camera Smart
User manual
Thank you for purchasing the Lightpro Camera Smart.
This document contains the required information for correct, efficient and
safe use of the product. Consult the user manual of your transformer for more
information about the installation and connection of your lighting plan or
visit our website www.lightpro.nl
Read the information in this manual carefully before using the product. Keep
this manual near the product for consultation in the future.
PRODUCT DESCRIPTION
The Lightpro Camera Smart is a camera for outdoor use. The camera can be mounted on the wall, a fence or garden pole. This product can only be used as a camera in combination with Lightpro’s 12-volt system. Any alterations made to the product may have consequences for the safety, guarantee and correct functioning of the product and/or other parts of the system.
SPECIFICATIONS
| Product | Lightpro Camera Smart |
|---|---|
| Article number | 218A |
| Dimensions (H x B x W) | 71 x 66 x 188 mm |
| Protection class | IP65 |
| Ambien temperature | -20 °C to 50 °C |
| Cable lengtht | 3m |
| Wifi | 2,4 Ghz |
| Consumption (max) | 7W |
PACKAGING CONTENT
[Figure A]
- Camera Smart
- Screws
- Plugs
- Lightpro F-connector
Check if all parts are present in the packaging. For questions about parts,
service, and any complaints or other remarks, you can always contact us.
E-mail: [email protected].
If you want to transfer your camera to someone else or add it to another user’s app, delete your camera from the Lightpro app first.
INSTALLATION
- Install the back plate from the cmera with the included screws. If necessary, drill holes in the wall and use the included plugs.
You can subscribe to cloud image storage via the camera’s settings in the Lightpro app.
INSTALLATION OF THE CAMERA
- Install the products in the desired position and lay the cables so they can be comfortably connected to the transformer or main cable.
- If products are provided with a drain hole for water, this hole must be pointing downwards.
- Use non-corrosive fixing materials (supplied as standard) if you want to bolt the products down.
- Connect the lights to the main cable by using the connector as shown in figure on page 5.
- Consult the manual of your transformer for more information.
SAFETY
-
Always fit this product so that it can still be accessed for servicing or maintenance. This product must not be permanently embedded or bricked in.
-
Turn off the system by pulling the plug of the transformer from the socket for maintenance.
-
Regularly clean the product with a soft, clean cloth.
Avoid abrasives that can damage the surface. -
Clean products with stainless steel parts with a stainless steel cleaning agent once per six months.
-
Do not use a high pressure washer or aggressive chemical cleaning agents when cleaning the product.
This can cause irreparable damage. -
Protection class III: this product may only be connected to safety extra-low voltage up to a maximum of 12 Volt.
-
This product is suitable for outside temperatures of: -20 to 50 °C.
-
Do not use this product in areas where combustible gases, fumes or liquids may be stored.
The product meets the requirements of the applicable EC, UK and EAEU guidelines.
For questions about parts, service, any complaints or other matters, you can
contact us at any time.
E-mail: [email protected]
Discarded electrical equipment must not be put in the household waste. If
possible, take it to a recycling company. For details of recycling, contact a
municipal waste processing company or your dealer.
6 year warranty – visit our website at lightpro.nl for
warranty conditions.
TECHMAR B.V. | CHOPINSTRAAT 10 | 7557 EH HENGELO | THE NETHERLANDS | WWW.LIGHTPRO.NL
UK Authorised Representative
(for authorities only)
ProductIP (UK) Ltd.
8, Northumberland Av.
London WC2N 5BY