JBC T260 Pick and Place Handle Instruction Manual
- September 12, 2024
- JBC
Table of Contents
JBC T260 Pick and Place Handle Instruction Manual
This manual corresponds to the following references:
T260-A
Packing List
The following items are included:
Pick & Place Handle ……. 1 unit
CU260 Cups Set …………. 1 unit
Ref. 0940163
Ø 4.3 mm – 0940112 (x2)
Ø 7 mm – 0940111 (x2)
Ø 10 mm – 0940110 (x2)
Manual …………………………. 1 unit
Ref. 0028986
NS260
Straight Needles Set ………1 unit
Ref. 0901546
Ø 0.41 mm – 0025110 (x2) blue
Ø 0.51 mm – 0025112 (x2) violet
Ø 0.84 mm – 0025114 (x2) green
NB260
Bent Needles Set ………… 1 unit
Ref. 0861660
Ø 0.51 mm – 0025117 (x2) violet
Ø 0.61 mm – 0025119 (x2) pink
Ø 0.84 mm – 0025121 (x2) green
Connections
Choose the needle that best fits the component and the suction cup if needed.
Connected the tool to the station suction plug.
Working
For a correct suction process insert the needle in the cup as shown in the picture.
Make sure the needle does not protrude from the cup.
**Suction
**
**Release
**
Once the suction is activated, cover the pen hole with your finger (1) and
lift off the component.
Lift your finger (2) from the pen hole to release the component.
Specifications
T260
Pick & Place Handle
Ref.: T260-A
- Total Net Weight: 21 g / 0.046 lb
Package Dimensions/Weight: 240 x 115 x 43 mm / 171 g
(L x W x H): 9.45 x 4.53 x 1.69 in / 0.377 lb
Complies with CE standards.
ESD safe.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage
paid, to the dealer where it was purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>