AUDIBAX Freeport 215 Set of 2 Active and Passive Speakers User Manual
- June 16, 2024
- AUDIBAX
Table of Contents
USER’S MANUAL FREEPORT212 / FREEPORT215
Professional Sound 2-Way PA Loudspeaker
WELCOME TO AUDIBAX
Thank you very much for choosing Audibax. We hope you enjoy your new product.
It has been developed and designed paying attention to the smallest details,
with quality control with European standards supervised by our great team of
professional technicians, who work every day to offer our customers the best
quality.
We make sure that every Audibax product is built to last long. All our
references are made with long lasting materials and our specialists are
dedicated to constantly doing quality controls to guarantee the best result.
Please read carefully this manual in order to use your Audibax product in the
best way. Do not hesitate to visit our website for further information:
www.audibax.com
SAFETY INSTRUCTIONS
GENERAL INFORMATION
– It is important to read and follow the instructions carefully.
– Keep all information and instructions in a secure location.
– Always follow the instructions provided.
– Take note of all safety warnings and never remove them from the equipment.
– Use the equipment only as intended and for its intended purpose.
– Ensure that the stands and/or mounts used are sufficiently stable and
compatible for fixed installations. Wall mounts should be properly installed
and secured, and the equipment should be installed securely to prevent falls.
– When installing the equipment, be sure to observe the relevant safety
regulations in your country.
– Do not install or operate the equipment near sources of heat, such as
radiators, heat registers, or ovens, and ensure that it is always cooled
sufficiently and cannot overheat.
– Do not place sources of ignition, such as burning candles, on the equipment.
– Keep ventilation slits unobstructed.
– For equipment designed for indoor use only should not be used near water,
flammable materials, fluids, or gases. Special outdoor equipment should be used
in accordance with the manufacturer’s instructions.
– Ensure that no dripping or splashed water can enter the equipment and do not
place containers filled with liquids on the equipment.
– Prevent objects from falling into the equipment.
– Use the equipment only with recommended accessories intended by the
manufacturer.
– Do not attempt to open or modify the equipment.
– Check all cables after connecting the equipment to prevent accidents or
damage due to tripping hazards.
– During transport, take steps to prevent the equipment from falling and
causing damage or injury.
– If the equipment is not functioning properly, fluids or objects have gotten
inside, or is otherwise damaged, switch it off immediately and unplug it from
the power outlet (if applicable). Only authorized, qualified personnel should
repair the equipment.
– Clean the equipment with a dry cloth.
– Comply with all applicable disposal laws and separate plastic and
paper/cardboard during packaging disposal.
– Keep plastic bags out of the reach of children.
FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:
– ATTENTION: If your equipment has a power cord with a grounding plug, it must
be connected to a wall outlet with a ground connection. Never remove the
grounding plug from the power cord.
– If your equipment has been exposed to extreme temperature changes, allow it
to reach room temperature before turning it on. Otherwise, moisture and
condensation may damage the equipment.
– Before plugging in the equipment, make sure that the voltage and frequency
of the power outlet match the specifications of the equipment. If the equipment
has a voltage selector, only connect it to the power outlet if the values
match. If the power cord or adapter does not fit your outlet, contact an
electrician.
– Do not step on the power cord. Make sure it is not pinched at the outlet,
adapter, or equipment connection.
– Keep the power cord or adapter within reach and disconnect the equipment
from the power supply when not in use or when cleaning it. Always unplug the
cord or adapter by pulling the plug or adapter, not the cord. Never touch the
cord or adapter with wet hands.
– Avoid frequently turning the equipment on and off, as this can reduce its
useful life.
– IMPORTANT: Only replace fuses with those of the same type and rating. If a
fuse repeatedly blows, contact an authorized service center.
– To completely disconnect the equipment from the power mains, unplug the
power cord or adapter from the outlet.
– If your device has a Volex power connector, the mating Volex connector must
be unlocked before it can be removed. Be careful when laying cables, as the
equipment can slide or fall if the power cord is pulled.
– Unplug the power cord or adapter before an extended period of disuse or in
case of lightning strike risk.
– Only install the equipment when it is disconnected from the power source.
– To prevent damage and overheating, qualified personnel should regularly clean
and service the equipment depending on ambient conditions like dust, nicotine,
and fog.
If the product contains the following symbols, please, read carefully:
CAUTION
Risk of Electric Shock.
Disconnect all power sources before servicing
CAUTION: To reduce the risk of electric shock, do not remove cover (or back).
There are no user serviceable parts inside. Maintenance and repairs should be
exclusively carried out by qualified service personnel.
The warning triangle with lightning symbol indicates dangerous uninsulated
voltage inside the unit, which may cause an electrical shock.
The warning triangle with exclamation mark indicates important operating and
maintenance instructions.
IMPORTANT INFORMATION
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This equipment is designed for professional purposes and its commercial use
must comply with the applicable national rules and regulations for accident
prevention.
As the manufacturer of this product, Audibax has the responsibility to inform
you about the potential health risks associated with its use. One such risk is
hearing damage caused by prolonged exposure to high volume.
When this product is in use, it can generate high sound-pressure levels that
may cause irreversible hearing damage to performers, employees, and audience
members.
To prevent this, it is important to avoid exposing yourself or others to
volumes exceeding 90 dB for an extended period of time.
PACKAGE CONTENT
1 x FREEPORT212 / FREEPORT215
1 x Power cord
1 x Speaker cable
1 x Control Remote
1 x User’s manual
PRODUCT DESCRIPTION
Model No | FREEPORT21S | FREEPORT212 |
---|---|---|
Type | 15 inch combo (active+passive) | 12 inch combo (active+passive) |
Material | Plastic | Plastic |
Woofer | 15 inch, 2″VC | 12 inch, 2″VC |
HF driver | 1 inch, Titanium | 1 inch, Titanium |
Frequency Response | 55HZ-20KHz | 58HZ-20KHz |
Sensitivity | 94dB | 93dB |
Impedance | 8 ohm | 8 ohm |
Amplifier | Class-H | Class-AB |
2-Band EQ | Treble, Bass | Treble, Bass |
Mic in | XLR & 1/4″ | XLR & 1/4″ |
Line in | XLR & RCA | XLR & RCA |
Line out | XLR & 1/4″ | XLR & 1/4″ |
MP3 Player | USB/S D/F M/Bluetooth, TWS | USB/SD/FM/Bluetooth, TWS |
AC Power | 230V/SOHz | 230V/SOHz |
Power Output | 400W RMS | 400W RMS |
Accessories | Power cord, speaker cable, control remote | Power cord, speaker |
cable, control remote
PANEL CONTROL INSTRUCTION
-
Mic in (XLR & 1/4” jack): These inputs are used to plug in microphone cable to get signal from dynamic microphone
-
Line in (XLR & RCA): These input are used to plug in audio cable to get signal from CD player or other devices
-
Line out: These inputs are used to plug in audio cable to output signal to other active speaker box or amplifiers
-
MP3 Vol: This potentiometer is used to control the volumen output of the mp3 player
-
Mic Vol: This potentiometer is used to control the volumen output of the mic input
-
Line Vol: This potentiometer is used to control the volumen output of the line input
-
Main Volume: This pot is used to adjust the total output volume
-
2-Band EQ
Treble: This potentiometer is used to adjust the volumen output of low frequency
Bass: This potentiometer is used to adjust the volumen output of high frequency -
Limit &Power indicator
Limit Indicator: When excessive power is detected, the limit indicator will illuminate. Please reduce the volume accordingly.
Power Indicator: Activate the power indicator by turning on the machine. -
Speakon output: This output is used to power to passive speaker box @8OHM
-
Power Switch: Turn on/off the machine
-
AC Socket & Fuse holder
Please use the correct power cable to get correct voltage of AC power supply
Please replace the fuse with correct specification when the fuse is broken in the fuse holder -
MP3 Player instruction
(1)Mode
Press Mode button to choose the work modes in the mp3 player like USB/SD/FM/Bluetooth
(2)PIay/Pause
Press this button to play the mp3 player or pause the mp3 player ,when the mp3 playwork at FM mode , press this button to scan the stations automatically
(3)Stop
Press this button to stop the mp3 player
(4)Repeat
Press this button to repeat the song
5)Backward
Press this button to play last song or look for last FM station
(6)Forward
Press this button to play next song or look for next FM station
DISPOSAL
Packaging:
- The packaging can be recycled using standard disposal methods and reintroduced into the reusable material cycle.
- Please follow the laws and regulations regarding disposal and recycling of packaging in your country.
Device:
-
This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. Used appliances should not be disposed of with household waste. Used device must be disposed of through an approved disposal company or a municipal disposal facility.
Please comply with the applicable regulations in your country. -
Please follow all the disposal laws and regulations in your country.
-
As a customer, you can obtain information on environmentally-friendly disposal options from the product seller or the appropriate regional authorities.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>