QCY T1 Pro Q38/TWS Bluetooth Earphones Manual
- June 16, 2024
- QCY
Table of Contents
QCY T1 Pro Q38/TWS Bluetooth Earphones Manual
Overview
1. Change EarTip
It is suggested that you try Middle EarTip first as it fits most people.
2. How to wear
Adjust its end towards your mouth .
TWS Mode
1. Remove the sti ckers on both Ear Buds and plug the EarBuds back in Charging Case as a way to activate EarBuds.
Notes: if EarBuds are unable to be charged, please charge for the charging case via USB cable first(for more details, please refer the following steps).
2. Take out the right EarBud and hold its MFB for 5s to trigger pairing mode then wait for auto connection with cellphone. After the auto connection is done, take out the left EarBud and hold its MFB for 1s to power on. Now wait until two EarBuds auto connect with each other(LED blinks red and white for 1s).
(Try the following step if you fail to build connection between two EarBuds)
Take out both two EarBuds and hold MFBs on both of them for 1s to power on. Then double tap MFBs on both EarBuds separately and wait until two of them auto connect with each other (LED blinks red and white for 1s).
Operation in Stereo Mode
Power-on
Hold MFB for 1s(LED will turn to white)
Power-off
Granting two EarBuds connect with each other, hold MFB on either EarBud for 3s
to power off both of them(LED will turn to red for 2s)
Factory Setting
Hold MFB/s for 5s(LED/s will blink red and white) when EarBud/ s charged. Once
reset EarBud/s to factory, all pairing list will be erased.
Play Media in both EarBuds
Play/Pause
When two EarBuds are connected with e ach other and cellphone, tap MFB on
either EarBud to play/pause music. Skip Track Forward Double tap MFB on either
EarBud to track forward.
Mono Mode
1. Hold MFB on either EarBud for 5s to enter pairing mode.
(LED will blink red and white.)
2. On cellphone, search for “QCY-Q38” and tap to connect.
3. The connection has been completed.
Operation in Mono Mode
Power-on
Power-on Hold MFB for 1s(LED turns to white)
Power-off
Hold MFB for 3s(LED will be red for 2s)
Ignore Call
Hold MFB for 1s to ignore incoming call.
Answer Call
Tap MFB to answer incoming call and tap it again to end the call.
Notes: Only EarBud connected with cellphone is able to deal with incoming
call.
Switching Audio Output between Cellphone and EarBud
When calling, you may hold MFB for 1s.
Mute On/Off
When calling, you may double tap MFB to switch mute on/off.
Play/Pause
Tap MFB to play/pause music.
Skip Track Forward
Double tap MFB to track forward.
Three Way Calling
Activate call waiting facility on your cellphone.(you may refer to cellphone’s
manual for more details.)
1. Activate call: Whenever you are on a call and have another incoming call
from another cellphone at the same time,you may tap MFB to activate the second
call while put the first one on hold.
Ignore call: Whenever you are on a call and have another incoming call from
another cellphone at the same time, you may hold MFB for 1s to ignore the
second call while keep talking on the first one.
2. Switch b etween held call and active call: Double tap MFB to switch
between the two calls.
End call: During three way calling, hold MFB for 1s to end the active call
while re-activate the held one.
Voice Control
Hold MFB for 1s to activate voice assistant(like Siri)
Single EarBud Re-connecting with Cellphone
Power on single EarBud(LED will turn to white) then tap MFB to reconnect to
the last connected device.(the EarBud was once connected with device before.)
Charging for Earphones
Low battery will be warned by voice prompt.
(LED will be solid red when charging and turn off once fully charged.)
Plug EarBuds back into Charging Case.(Pogo pins should be contacted properly.)
Charging for the Charging Case
LED will be solid red when charging and turn to blue once fully charged.
Charge the case via USB cable
Feature
Parameters
Model number: QCY-Q38
Stand-by time: Approx.80hr
Battery type: Li-polymer
Size: 25.3×17.3×29mm
Operation range: 10m(no obstacle)
Bluetooth profile:HFP/HSP/A2DP/AVRCP
Battery capacity(EarBud): 3.7V 43 mAh
Battery capacity(Charging Case):3.7V 220mAh
Input parameter(Charging Case):5V 250mA
Bluetooth version:V4.2
Weight: 5.3g
Talking time: Approx. 3hr
After Service and Support
1. Warranty Period
1)Returning: 1 year after you purchase this item.
2)Repairing: 2 years after you purchase this item.
2. Free Returning will Only be Accessed under All of Following Circumstances
- 1 year after you purchase this item.
2)Three completed guarantee receipts have to be provided to distributor(item model No., sales date and item serial No. shall be displayed on invoice and warranty card).
3)Required item has to be with full package and accessories.
4)Malfunction has to be caused by quality deficiencies.
Notes: Exchanged item will have the same model No. and spec. as your required one’s.
3. Free Repairing will Only be Accessed under All of Following Circumstances
- 2 years after you purchase this item.
2)Three completed guarantee receipts have to be provided to distributor(item model No., sales date and item serial No. shall be displayed on invoice and warranty card). - Malfunction has to be caused by quality deficiencies.
Free repairing & returning will not be accessed under following circumstances
A: Item is out of warranty period or effective sales receipt and warranty card
fail to be provided.
B: Breakdowns of housing, bags, gifts and accessories or any non-functional fault.
C: Unauthorized disassembly, breakdowns caused by improper operation or using in environment which is forbidden in user’s manual.
D: Artificial damages(including but not limiting to leaking, damped, dropping off, squeezing, breaking, burning and distortion).
E: Faults caused by force Majeures(such as earthquake, fire and flood).
Hazardous substances and their contents in the item
Lifespan:
As the booklet states, the eco-lifespan of the item is 5 years while using it
in normal ways. During the period, no dangerous material will be leaked. The
item must be recycled by the local law.
Tips
1.Before using the headset, please read the manual carefully and keep it for
future references.
2.The headset need to be fully charged prior to first-time use.
3.If the headset is left unused for over two weeks, please recharge it
periodically.
4.Please use the chargers made by qualified manufacturer.
5.If the headset cannot be found by your phone, please check whether it is in
pairing mode; if left unconnected for a long while, the headset will exit
pairing mode, please re-enter the mode; if a procedure error of your phone
occurs, reboot it; if a procedure error of the headset occurs, reboot or reset
it.
6. If the t wo uni ts can not connect with each other automatically when switched on. Please hold the MFB of both units until the white light is on then move them approaching each other and wait for the connection completed.
Caveats
1.Never disassemble or modify your headset for any reasons to avoid any
damages and danger.
2.Do not store the headset in extreme temperatures (under 0℃ or over 45℃).
3.Avoid using the indicator close to the eyes of children or animals.
4.Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
5.Do not use harsh chemicals or strong detergents to clean the headset.
6.Keep the headset dry.
Notes: Please arrange using time properly since your hearing may be damaged by
using the device for a long time.
For any after service, please contact local distributor
Perform standard: Q/HL 1-2016
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Dalingya Industrial Zone, Daojiao Town,Dongguan City, Guangdong
Province(QCY Environmental Zone, Dayaling No.5, YuehuiRoad)
Questions about your QCY T1 Pro Q38/TWS Bluetooth Earphones Manual? Post in
the comments!
QCY T1 Pro Q38/TWS Bluetooth Earphones Manual [PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>