casselin C7CAP1640 Pasta Cooker Instruction Manual

casselin C7CAP1640 Pasta Cooker

PASTA COOKER – LINE 700

C7CAP1640-C7CAP16280-C7CAP2340S- C7CAP23280S

SAS CASSELIN
83 rue Marcel Mérieux 69960 Corbas FRANCE
Tel: +33 (0)4 82 92 60 00
Email : contact@casselin.com

PRESENTATION

Information
This user manual serves as information to all its users. It describes the installation and handling of the device. Safety instructions and technical knowledge of the device are detailed in this manual. They are essential conditions for the proper use of professional equipment.
Each user must scrupulously respect all instructions for use. This user manual must be kept next to the product for proper use and access to the instructions at all times for each user.

Description of symbols
Information, instructions for use and safety instructions are represented by symbols. It is essential to follow these instructions in order to avoid material damage and personal injury.
WARNING
This symbol means that there is a danger that could cause injury. Concentration and caution are imperative when operating this device.

ELECTRICAL DANGER
This means that there is a danger from electric current. Failure to follow instructions may result in risk of injury and death.

ATTENTION
This symbol is used to indicate that failure to follow the instructions may result in failure or destruction of the device.

NOTICED
This symbol indicates good practices and advice that must be applied for effective use of the device.

NOTICED
You must read these instructions for use before putting the device into service. We accept no liability for damage and breakdowns resulting from non- compliance with the instructions for use. The Casselin company reserves the right to make any modifications, whether technical, informative or marketing, to our product without notice.

Copyright
The user manual is protected by copyright law. Reproductions of all types and forms – even partial – as well as the exploitation and/or transmission of its contents are not permitted without our authorization. Any violation of these provisions entitles you to damages. Other rights remain reserved.

Declaration of conformity
The device complies with current European Union standards and directives. We attest to this in the CE declaration of conformity.

Warranty
The instructions given in these instructions for use have been drawn up taking into account the regulations in force, current technical developments, our knowledge and experience. All translations have been produced professionally. However, we decline all responsibility in the event of a translation error. The attached French version is authentic.

SECURITY

Safety instructions are used to avoid dangers. They are mentioned in the individual chapters and are characterized by symbols. Their compliance guarantees optimal protection against risks and allows ideal operation of the device. Safety instructions must be available and legible on the devices.

Principles
Safety instructions are established to avoid errors, dangerous uses and breakdowns. Therefore, the device must neither be altered nor misused. The device is designed according to currently developed technical rules. This notice must be kept. The device must be used in premises intended for this purpose and only by a responsible person with knowledge of the operation of the device.

Intended use
The operation of the device and the safety of use are only guaranteed in the event of normal and correct use of it. Assembly and technical interventions must be carried out by professionals.

ATTENTION
Any other use is considered non-compliant. Any accusation linked to improper use of the device is not admissible and will be void. Intended use corresponds to use described in these instructions for use. Proper use corresponds to compliance with safety, hygiene, cleaning and maintenance rules.

Safety instructions when using the device
Information relating to occupational safety refers to the European Union regulations valid at the time of manufacture of the device. For commercial use of the device, the operator undertakes, throughout the duration of its use, to verify the conformity of the measures cited in terms of work safety with the current state of the arsenal of advice and to comply with the new regulations.
For non-EU countries, the laws and provisions of the country must be respected. All environmental protection provisions must also be respected.

ATTENTION
The device must be operated by people with sufficient physical and intellectual means. People with limited physical and intellectual means must be supervised to use this device. Use prohibited by children and minors (exceptions made within a legal framework provided for by law)
If the device is used by a third party, the instructions for use must be available before any use. Any new user must have read the instructions for use.
The device must only be used in premises intended for this purpose.

TRANSPORT, PACKAGING AND STORAGE

Inspection following transport
Verification of the absence of damage and the completeness of the device must be carried out upon receipt of the package. If transport damage is identified, refuse or accept the delivered product only with reservation*. A complaint detailing the defects noted must subsequently be made. The collection of damages is only possible in the event of a complaint made within the stipulated time limits, i.e. 24-48 hours maximum.
written on the carrier’s paper or digital delivery notes.

Packaging
The packaging of the device must be kept in the event of moving, or for return to after-sales service. The interior and exterior packaging must be completely removed before using the device. The standards in force in your country regarding environmental protection must be respected before destruction of the packaging.

ATTENTION
The device can be kept in stock but only in its original closed packaging. Storage can be carried out in accordance with these conditions

• Storage in a dry, non-humid room
• Sheltered from the sun
• Stock control for more than 2 months (general condition of the device and all the elements constituting it)
• No shaking of the material
• Storage in closed premises and not outside.

HARDWARE FEATURES

Subject to change

30°C to 110°C
Tank dimensions| L 308 x D 336 x

H 213mm

| 2 x L 308 x D 336 x

H 213mm

| L 306 x D 340 x

H 320mm

| 2 x L 306 x D 340 x

H 320 mm

Power| 4,500 W / 400 V| 9000W / 400V| 6000W / 400V| 12,000 W / 400 V
Dimensions| L 400 x D 700 x

H 330mm

| L 800 x D 700 x

H 330mm

| L 400 x D 700 x

H 900mm

| L 800 x D 700 x

H 900mm

Weight| 17.30 kg| 32 kg| 40.30 kg| 70.8 kg

INSTALLATION AND USE

Safety instructions

ELECTRICAL DANGER
Risk linked to electric current!

• No contact with heat sources should take place with the electrical cord.
• The cord should not hang over the edge of a table or counter.
• Do not pour water into a device that is operating or still hot.
• The device must be properly connected and comply with current regulations.

WARNING
When operating, the device can reach high temperatures. To avoid burns and accidents, do not use the device if it is malfunctioning, and do not use spare parts that are not original.

ELECTRICAL DANGER
Risk linked to electric current!
If incorrectly installed, the device may be dangerous and cause injury. Before any installation, check the electrical network data. Plug in the device only when it complies. The device must be unpacked and checked completely before connection by a professional.

Use

WARNING
The installation of the device and maintenance should only be carried out by professionals.

• Do not leave the device running without monitoring it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.

MANUAL

FACILITY
The device must be completely removed from its packaging. All protection must be completely removed. Place the device upright on a solid, flat surface. Never place the device on a flammable surface.
Do not install this appliance near open fires or other heating appliances.
It is prohibited to place flammable objects on the device or within a distance of less than 10 cm from the device.
Safety distances for flammable materials according to their degree of flammability:

• A non-flammable: granite, sandstone, concrete, bricks, ceramic tiles, coating
• B hardly flammable: acumin, heraclitus, lihnos, itaver
• C1 poorly flammable: wood from hardwood trees, plywood, hardened paper, umakart
• C2 medium flammability: chipboard, solodur, cork, rubber, coverings
• C3 easy flammability: wood fiber boards, polystyrene, polyurethane, PVC

The electrical cable must be protected to at least 16 amps. The device must be plugged directly into a wall outlet. Using a power strip will cause the device to trip.
When the device is placed against a wall, it must be able to withstand a temperature of 60°C.
If this is not the case, it is essential to insert a protective layer.
Ensure that all ventilation openings are not blocked.

Before the first start-up, remove the protective sheet. Clean all surfaces with a soft cloth, lukewarm water and a detergent, to remove the anti-rust products applied during manufacturing and then wipe the device with a clean cloth .

Turn on the appliance at full power for approximately 15-20 minutes to cook the plate.
Never leave the device running unattended!

Fill the device with water up to the line on the side of the tank. Switch on the device using the main switch (A), turn the control device (C) from position “0” to the position marking the desired temperature (between 30°C and 90°C). The indicator light (B) is on when the device is powered. To turn off the appliance – turn the control device (C) to position “0” and press the main switch (A). Always check the water level, never use the device without water. To be used only under supervision and equipped with the corresponding gastronomy containers.

DRAINING THE TRAY
Empty the tank only when the water is cold and the appliance is unplugged. Obtain a suitable container to collect the water. This container must be made of heat-resistant material and must be placed to avoid splashing of drain water. Position the drain hose, open the safety lock by turning it upwards and turn the lever to the position indicated for opening the tap. Only drain the bath when the water is cold.

CLEANING AND MAINTENANCE

Safety instructions

Any maintenance, cleaning or repair of the device must be carried out with the device unplugged (isolated from all electrical sources).

The use of caustic detergents and baking soda for cleaning is prohibited. Water must not penetrate inside the

device.

Never immerse the device in water or other liquid.
Use Casselin brand products intended for this purpose.

WARNING
The device cannot be cleaned with a direct water jet (no pressurized water jet).

Daily maintenance
Unplug the device
Clean the device with warm water and a clean cloth after each use
After cleaning, use a soft, dry cloth to polish and dry the device. All parts must be dried.
Store the device in a dry place.

Safety instructions for maintaining the device
Daily check for damage to the power cord. Never use the appliance when the cord is damaged. If the cord shows defects, it must be replaced by a qualified technician.
In the event of a breakdown, contact your dealer.
Any maintenance or repair work should only be carried out by a professional.

NOTICED

In the event of a disconnection, unplug the appliance, allow it to cool and contact your retailer. If the unit does not start, check your power cord. The device should not be plugged into a power strip but directly into a wall outlet. For any other anomaly, contact your dealer.

NOTICED

Waste from used devices: any used device must, during its disposal, comply with the regulations in force in its country*. It is imperative to render the device unusable before disposal by removing the power cable.

in terms of ecology and recycling

IRREGULARITY OF OPERATION

•  The power supply box does not work.
• The safety thermostat has tripped.

| Check the location of the box.
|  The safety thermostat is damaged.| Press the reset button located in the case.
| | Contact your dealer.
| The safety thermostat has started.|
The device is on but it is not heating. The heating indicator light remains off.|

• The resistance no longer works.
• Contact with damaged heating element.

| Contact your dealer.
The requested temperature is not reached.| The thermostat is damaged.| Contact your dealer.
The heating element stops after a while.| The safety thermostat has started.| Press the Reset button in the distribution box.

NOTICED
The malfunctions mentioned above are cited for information purposes only and remain virtual. If you have any doubts, contact your reseller.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>