casselin GAUFRIER 180°C Professional Double Opening Waffle Maker User Manual
- June 9, 2024
- casselin
Table of Contents
WAFFLE MAKER 180°C CG180S – CG180D – CG180RS – CG180SB
PRESENTATION
1.1 Information
This instruction manual serves as information for all its users. It describes
the installation and handling of the device. The safety instructions and
technical knowledge of the device are detailed in this manual. They are
essential conditions for the proper use of professional equipment.
Each user must scrupulously respect all the instructions for use. This user
manual must be kept next to the product for proper use and access to the
instructions at all times for each user.
1.2 Description of symbols
Information, advice on use and safety instructions are represented by symbols.
It is essential to follow these instructions in order to avoid material damage
and bodily injury.
WARNING
This symbol means that a hazard exists that could lead to personal injury.
Concentration and caution are imperative to operate this device.
ELECTRICAL HAZARD
This means that there is a danger related to electric current. Failure to
follow the instructions can lead to the risk of injury and death.
WARNING
This symbol is used to indicate that non-compliance with the instructions may
lead to a breakdown or the destruction of the device.
REMARK
This symbol indicates good practices and advice that must be applied for
efficient use of the device.
REMARK
It is essential to read this user guide before commissioning the device. We do
not accept any liability for damage and breakdowns resulting from non-
compliance with the instructions for use. The Casselin company reserves the
right to make any technical, informative or marketing changes to our product
without notice.
1.3 Rights of author
The user manual is protected by copyright law. Reproductions of any kind and
in any form – even partial – as well as the exploitation and/or transmission
of its contents are not permitted without our permission. Any violation of
these provisions entitles you to damages. Other rights remain reserved.
1.4 Declaration of Conformity
The device corresponds to the current standards and directives of the European
Union. We confirm this in the CE declaration of conformity.
1.5 Warranty
The instructions given in this user manual have been drawn up taking into
account the regulations in force, current technical development, our knowledge
and experience. All translations have been professionally prepared. However,
we decline all responsibility in the event of a translation error. The
attached French version is authentic.
SECURITY
Safety instructions serve to avert dangers. They are mentioned in the
individual chapters and are characterized by symbols. Observance of these
guarantees optimum protection against risks and enables ideal operation of
the device. The safety instructions must be available and legible on the
devices.
2.1 Principles
The safety instructions are established to avoid errors, dangerous uses and
breakdowns. Therefore, the device must not be modified or used for improper
use. The device is designed according to technical rules currently being
developed. This notice must be kept. The appliance must only be used in
premises provided for this purpose by a responsible person who is familiar
with the operation of the appliance.
2.2 Intended use
The operation of the device and the safety of use are only guaranteed in the
event of normal and compliant use of the device. Assembly and technical
interventions must be carried out by professionals.
WARNING
Any other use is considered improper. Any charges related to improper use of
the device are not admissible and will be forfeited. Proper use corresponds to
use described in this user guide. Proper use corresponds to compliance with
safety, hygiene, cleaning and maintenance rules.
2.3 Safety instructions when the use of the device
The indications relating to occupational safety refer to the regulations of
the European Union valid at the time of manufacture of the device. For
commercial use of the device, the operator undertakes, throughout the duration
of its use, to observe the conformity of the measures cited in terms of work
safety with the current state of the arsenal of advice and to comply with the
new regulations. For countries outside the EU, the laws and provisions of the
country must be observed. All environmental protection provisions must also be
observed.
WARNING
The device must be handled by people with sufficient physical and intellectual
means. People with limited physical and intellectual means must be supervised
to use this device. Use prohibited for children and minors (exceptions made
within a legal framework provided for by law)
If the device is used by a third party, the instructions for use must be
available before any use. Any new user must have read the instructions for
use.
The device must only be used in rooms intended for this purpose.
TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
Verification of the absence of damage and the integrity of the device must be
carried out upon receipt of the package. In the event of identification of
damage due to transport, refuse or accept the product delivered only under
reserve *. A complaint detailing the defects observed must then be made. The
perception of damages is only possible in the event of a complaint formulated
within the time limits provided, ie 24-48 hours at the most.
-
written on the right paper or digital delivery from the carrier.
3.2 Packaging
The packaging of the device must be kept in the event of a move, or for a return to the after-sales service.
The interior and exterior packaging must be completely removed before using the device. The standards in force in your country concerning the protection of the environment must be respected before destroying the packaging.
3.3. Storage
WARNING
The storage of the device in stock can be done but only in its original closed packaging.
Storage can be carried out under these conditions:- Storage in a dry, non-humid place
- Sheltered from the sun
- Control of stock for more than 2 months (general condition of the device and all the elements that make it up)
- No material shaking
- Storage in a closed room and not outside.
MATERIAL CHARACTERISTICS
* Subject to change
Model | CG180S | CG180D | CG18ORS | CG180SB |
---|---|---|---|---|
Temperature | 60°C – 300°C | 60°C – 300°C | 60°C – 300°C | 60°C – 300°C |
Electrical data | 1800W / 230V | 3600W / 230V | 1600W / 230V | 1800W / 230V |
Dimensions | W 386 xD 580 xH | |||
305 mm | W 585 xD 580 xH | |||
305 mm | W315xD 645xH | |||
300 mm | W 386 xD 580 xH |
305 mm
Weight| 18.45Kg| 36.70Kg| 17.5kg| 18.45Kg
INSTALLATION AND USE
5.1 Safety instructions
ELECTRICAL HAZARD
Danger due to electric current!
- No contact with heat sources should take place with the electrical cord.
- The cord should not hang over the edge of a table or counter.
- Do not pour water into an appliance that is in operation or still hot.
The device must be properly connected and comply with the regulations in
force.
WARNING
While operating, the device can reach high temperatures. To avoid burns and
accidents, do not use the device if it is malfunctioning, and do not use non-
original spare parts.
ELECTRICAL HAZARD
Danger due to electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before
any installation, check the data of the electrical network. Connect the device
only when there is compliance. The device must be unpacked and fully checked
before connection by a professional.
5.2 Use
WARNING
The setting up of the device installation and maintenance should only be
carried out by professionals.
- Do not leave the appliance running without watching it.
- During use, your hands must be dry.
- Do not move or tilt the device during operation.
MANUAL
COMMISSIONING
The device must be completely removed from its packaging and the protections
must be completely removed.
Place the device on a solid, stable, flat and non-flammable surface.
Do not lean the device against the wall.
Do not install the device near open fires or other heating devices.
It is forbidden to place flammable objects on or near the device.
Make sure that all ventilation openings are not blocked.
Make sure the device is positioned for optimal use.
The device must be electrically protected upstream with an appropriate safety
device.
The device must be plugged directly into a wall socket and not into a power
strip.
Let the appliance warm up for 15 minutes before first use.
NEVER use cold water on the cast iron plates as you risk causing thermal
shock.
USE
Connect the device, press the switch, the red light comes on.
Turn the temperature adjustment knob. The temperature can be between 60° and
300°C.
We recommend that you use this device at a maximum temperature of 220°C.
Once the desired temperature is reached, the red light goes out.
Pour the waffle batter in the center of the plate. Close the appliance and
cook for the recommended cooking time using the timer.
When the temperature decreases, the device starts heating again and the red
light turns on again.
At the end of use, turn the thermostat to 0 and press the switch to OFF mode.
TIMER
Count up: stopwatch
Count down: timer
‘-‘ and ‘+’: timer setting
Stopwatch
Start press ‘+’ for stopwatch. To stop, press ‘+’ .
5 beeps to signal stopwatch stoppage.
timer
Pressing ‘–’ and ‘+’ simultaneously displays the default value: 10sec.
Simultaneously press ‘-‘ and ‘+’ again (2 beeps).
The time flashes, you can set the desired time with ‘–’ and ‘+’ (0.1 – 19.59
min).
Wait for the screen to turn off then press ‘-‘ to start the timer.
5 beeps to signal the end of the timer.
REMARK
The appliance is equipped with a safety system in case of overheating. In the
event of tripping, unplug the appliance and allow it to cool. If this
protection system activates regularly, it is essential to contact your
retailer.
After automatic shutdown, the device can only be put into operation by
pressing the Reset button on the back of the device. To do this, wait for the
temperature to drop, press the Reset button.
CLEANING AND MAINTENANCE
6.1 Safety instructions
Any maintenance, cleaning, repair of the appliance must be done with the
appliance unplugged (isolated from all electrical sources).
The use of caustic detergents and baking soda for cleaning is prohibited.
Water must not get inside the device.
Never immerse the appliance in water or any other liquid.
Use the Casselin brand products provided for this purpose.
WARNING
The device cannot be cleaned with a direct water jet (no pressurized water
jet).
6.2 Daily maintenance
Unplug the device
Clean the device with warm water and a clean cloth after each use.
After cleaning, use a soft, dry cloth to polish and dry the device. All parts
must be dried.
Store the device in a dry place.
6.3 Safety instructions for the maintenance of the device
Daily check that the power cord is not damaged. Never use the appliance when
the cord is damaged. If the cord has any faults, it must be replaced by a
qualified technician.
In the event of a fault, contact your dealer.
Any maintenance or repair work should only be carried out by a professional.
REMARK
In the event of a trip, unplug the appliance, let it cool down and contact
your retailer. If the unit does not start, check your power cord. The device
must not be plugged into a power strip but directly into a wall socket. For
any other anomaly, contact your dealer.
REMARK
Waste from used appliances: all used appliances must, when disposed of, comply
with the regulations in force in their country*. It is imperative to make the
device unusable before disposal by removing the power supply cable.
- in terms of ecology and recycling
IRREGULAR OPERATION
ANOMALY | CAUSES | EXPLANATION |
---|---|---|
The appliance does not work, the heating indicator light does not come on. | > |
The power cable is not plugged in. > The power supply fuse has tripped.
The power supply box does not work.
The safety thermostat has tripped. > The safety thermostat is damaged.| > Connect the power cable
correctly.
Check all of your fuses.
Check the location of the box.
Press the reset button located in the housing.
Contact your dealer.
The device is on but not heating. The heating indicator lamp remains off.| > The safety thermostat has activated.
The resistor no longer works.
Contact with damaged heating element.| Contact your dealer.
The requested temperature is not reached.| The thermostat is damaged.| Contact your dealer.
The heating element switches off after a certain time.| The safety thermostat has started.| Press the Reset button in the distribution box.
REMARK
The malfunctions mentioned above are only cited as an indication and remain
virtual. If you have any doubts, contact your dealer.
CG180S – CG180D –
CG180RS – CG180SB
SAS CASSELIN
83 Rue Marcel Mérieux 69960 Corbas FRANCE
Tel: +33 (0)4 82 92 60 00
Email:contact@casselin.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>