casselin CCHMS Multi Snack Trolley User Manual
- June 9, 2024
- casselin
Table of Contents
MULTI SNACK TROLLEY
CCHSC
SAS CASSELIN
83 rue Marcel Mérieux 69960 Corbas FRANCE
Tel: +33 (0)4 82 92 60 00 – Mail:contact@casselin.com
1.PRESENTATION
1.1 Information
This instruction manual serves as information for all its users. It describes
the installation and handling of the device. The safety instructions and
technical knowledge of the device are detailed in this manual. They are
essential conditions for the proper use of professional equipment.
Each user must scrupulously respect all the instructions for use. This user
manual must be kept next to the product for proper use and access to the
instructions at all times for each user.
1.2 Description of symbols
Information, advice on use and safety instructions are represented by symbols. It is essential to follow these instructions in order to avoid material damage and bodily injury.
WARNING
This symbol means that a hazard exists that could lead to personal injury.
Concentration and caution are imperative to operate this device.
ELECTRICAL HAZARD
This means that there is a danger related to electric current. Failure to
follow the instructions can lead to the risk of injury and death.
WARNING
This symbol is used to indicate that non-compliance with the instructions may
lead to a breakdown or the destruction of the device.
REMARK
This symbol indicates good practices and advice that must be applied for
efficient use of the device.
REMARK
It is essential to read this user guide before commissioning the device. We do
not accept any liability for damage and breakdowns resulting from non-
compliance with the instructions for use. The Casselin company reserves the
right to make any technical, informative or marketing changes to our product
without notice.
1.3 Rights of’author
The user manual is protected by copyright law. Reproductions of any kind and in any form even partial as well as the exploitation and/or transmission of its contents are not permitted without our permission. Any violation of these provisions entitles you to damages. Other rights remain reserved.
1.4 Declaration of Conformity
The device corresponds to the current standards and directives of the European Union. We confirm this in the CE declaration of conformity.
1.5 Warranty
The instructions given in this user manual have been drawn up taking into account the regulations in force, current technical development, our knowledge and experience. All translations have been professionally prepared. However, we decline all responsibility in the event of a translation error. The attached French version is authentic.
2. SECURITY
Safety instructions serve to avert dangers. They are mentioned in the individual chapters and are characterized by symbols. Observance of these guarantees optimum protection against risks and enables ideal operation of the device. The safety instructions must be available and legible on the devices.
2.1 Principles
The safety instructions are established to avoid errors, dangerous uses and breakdowns. Therefore, the device must not be modified or used for improper use. The device is designed according to technical rules currently being developed. This notice must be kept. The appliance must only be used in premises provided for this purpose by a responsible person who is familiar with the operation of the appliance.
2.2 Intended use
The operation of the device and the safety of use are only guaranteed in the event of normal and compliant use of the device. Assembly and technical interventions must be carried out by professionals.
WARNING
Any other use is considered improper. Any charges related to improper use of
the device are not admissible and will be forfeited. Proper use corresponds to
use described in this user manual. Proper use corresponds to compliance with
safety, hygiene, cleaning and maintenance rules.
2.3 Safety instructions whenthe use of the device
The indications relating to occupational safety refer to the regulations of
the European Union valid at the time of manufacture of the device. For
commercial use of the device, the operator undertakes, throughout the duration
of its use, to observe the conformity of the measures cited in terms of work
safety with the current state of the arsenal of advice and to comply with the
new regulations.
For countries outside the EU, the laws and provisions of the country must be
observed. All environmental protection provisions must also be observed.
WARNING
The device must be handled by people with sufficient physical and intellectual
means. People with limited physical and intellectual means must be supervised
to use this device. Use prohibited for children and minors (exceptions made
within a legal framework provided for by law)
If the device is used by a third party, the instructions for use must be
available before any use. Any new user must have read the instructions for
use.
The device must only be used in rooms intended for this purpose.
3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
Verification of the absence of damage and the integrity of the device must be carried out upon receipt of the package. In the event of identification of damage due to transport, refuse or accept the product delivered only under reserve *. A complaint detailing the defects observed must then be made. The perception of damages is only possible in the event of a complaint formulated within the time limits provided, ie 24-48 hours at the most.
- written on the right paper or digital delivery from the carrier.
3.2 Packaging
The packaging of the device must be kept in the event of a move, or for a return to the after-sales service. The interior and exterior packaging must be completely removed before using the device. The standards in force in your country concerning the protection of the environment must be observed before destroying the packaging.
3.3. Storage
WARNING
The storage of the device in stock can be done but only in its original closed
packaging. Storage can be carried out under these conditions:
- Storage in a dry, non-humid place
- Sheltered from the sun
- Control of stock for more than 2 months (general condition of the device and all the elements that make it up)
- No material shaking
- Storage in a closed room and not outside.
4. MATERIAL CHARACTERISTICS
- Subject to change
Model|
CCHMS
---|---
Electrical data|
9000W + 3600W + 2400W / 400V + 230V 230V
Dimensions|
W 1036 x D 650 x H 1340 mm
5. INSTALLATION AND USE
5.1 Safety instructions
ELECTRICAL HAZARD
Danger due to electric current!
- No contact with heat sources should take place with the electrical cord.
- The cord should not hang over the edge of a table or counter.
- Do not pour water into an appliance that is in operation or still hot.
- The device must be properly connected and comply with the regulations in force.
WARNING
While operating, the device can reach high temperatures. To avoid burns and
accidents, do not use the device if it is malfunctioning, and do not use non-
original spare parts.
ELECTRICAL HAZARD
Danger due to electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before
any installation, check the data of the electrical network. Connect the device
only when there is compliance. The device must be unpacked and fully checked
before connection by a professional.
5.2 Use
WARNING
The setting up of the device installation and maintenance should only be
carried out by professionals.
- Do not leave the appliance running without watching it.
- During use, your hands must be dry.
- Do not move or tilt the device during operation.
MANUAL
COMMISSIONING
The trolley must be completely removed from its packaging.
All guards must be completely removed.
Place the cart on a solid, flat surface. Never put the display on a flammable
surface.
Do not install near open fires or other heating devices.
The electrical cable must be protected to at least 16 Amps. The plug should be
plugged directly into a wall outlet. Using a power strip will trip the device.
-
Mount the protective glass in the locations provided for this purpose. Position the accessories in their intended locations.
-
Electrical connection: the installation and commissioning of the device must be entrusted to personnel with the necessary skills for this purpose and carried out in compliance with the standards in force in terms of accident prevention. Be sure to make the connection in accordance with the data given on the technical characteristics plate. Power outlets should be near the device and easily accessible.
Switch off and unplug the appliance, then use hot soapy water to clean the stainless steel plates. NEVER use cold water on the stainless steel plates because you risk causing a thermal shock.
FRYER USE
Check that there is no water in the oil pan then pour oil into the pan. Two marks are inscribed in the oil tank. Minimum and maximum quantities must be respected. It is recommended to use a quality oil, vegetable oils less saturated with fats are recommended. (When using solid shortening, always melt it before adding it to the frypot)
Plug in the device once the oil tank has been filled up to the mark.
Once plugged in, the red indicator light comes on.
Turn the thermostat to the desired temperature. The green light will come on,
then go off once the desired temperature has been reached.
Once the frying is done, hang the basket to drain it.
Do not close the lid until the oil or fat has cooled.
When the temperature drops, the unit starts heating again to keep the oil at the desired temperature, the temperature light will automatically turn on again.
Change the oil regularly. After the fryer and the oil have cooled, carefully
pour the used oil into the collection container and dispose of it in
accordance with the rules of environmental protection.
USE PLAQIE A SNACKER
Plug in the device, once plugged in the red light comes on.
Turn the temperature adjustment knob. The green light comes on The temperature
can be between 60° and 300°C.
We recommend that you use this device at a maximum temperature of 250°C.
In 10 minutes, the temperature of 250°C is reached. Once the desired
temperature is reached, the green light goes out.
When the temperature decreases, the device starts heating again and the green light turns on again until the correct temperature is reached.
PANINI GRILL USE
Plug in the appliance, once the switch is on, the power-on indicator lights
up.
Turn the temperature adjustment knob to your liking.
The temperature can be between 60° and 300°C.
We recommend that you use this device at a maximum temperature of 250°C.
When the chosen temperature is set, the red temperature light will come on.
In 10 minutes, the temperature of 250°C is reached and the red temperature
indicator light goes out.
When the temperature drops, the device starts heating again and the red light
turns on again. Thanks to the operating handle, lift the upper plate and
grease the plates at your convenience in order to place your preparations to
be heated or grilled.
Close the plates and watch the cooking.
REMARK
The appliance is equipped with a safety system in case of overheating. In the
event of tripping, unplug the appliance and allow it to cool. If this
protection system activates regularly, it is essential to contact your
retailer.
After automatic shutdown, the device can only be put into operation by
pressing the Reset button on the back of the device. To do this, wait for the
temperature to drop, press the Reset button.
6. CLEANING AND MAINTENANCE
6.1 Safety instructions
Any maintenance, cleaning, repair of the appliance must be done with the
appliance unplugged (isolated from all electrical sources).
The use of caustic detergents and baking soda for cleaning is prohibited.
Water must not get inside the device.
Never immerse the appliance in water or any other liquid.
Use the Casselin brand products provided for this purpose.
WARNING
The device cannot be cleaned with a direct water jet (no pressurized water
jet).
6.2 Daily maintenance
Unplug the device
Clean the device with warm water and a clean cloth after each use.
After cleaning, use a soft, dry cloth to polish and dry the device.
All parts must be dried.
Store the device in a dry place.
6.3 Safety instructions for the maintenance of the device
Daily check that the power cord is not damaged. Never use the appliance when
the cord is damaged. If the cord has any faults, it must be replaced by a
qualified technician.
In the event of a fault, contact your dealer.
Any maintenance or repair work should only be carried out by a professional.
REMARK
In the event of a trip, unplug the appliance, let it cool down and contact
your retailer. If the unit does not start, check your power cord. The device
must not be plugged into a power strip but directly into a wall socket. For
any other anomaly, contact your dealer.
REMARK
Waste from used devices: all used devices must, when disposed of, comply with
the regulations in force in their country*. It is imperative to make the
device unusable before disposal by removing the power supply cable.
- in terms of ecology and recycling
7. IRREGULAR OPERATION
ANOMALY | CAUSES | EXPLANATION |
---|---|---|
The appliance does not work, the heating indicator light does not come on. | > |
The power cable is not plugged in.
The power supply fuse has tripped.
The power supply box does not work.
The safety thermostat has tripped.
The safety thermostat is damaged.
| > Connect the power cable properly.
Check all of your fuses.
Check the location of the box.
Press the reset button located in the housing.
Contact your dealer.
The device is on but not heating. The heating indicator lamp remains off.| > The safety thermostat has activated.
The resistor no longer works.
Contact with damaged heating element.
| Contact your dealer.
The requested temperature is not reached.| The thermostat is damaged.| Contact
your dealer.
The heating element switches off after a certain time.| The safety thermostat
has started.| Press the Reset button in the distribution box.
REMARK
The malfunctions mentioned above are only cited as an indication and remain
virtual. If you have any doubts, contact your dealer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>