casselin CPAST480 Griddle Toaster Instruction Manual

: June 9, 2024
: casselin

casselin CPAST480 Griddle Toaster

casselin CPAST480 Griddle Toaster

PRESENTATION

Information

This instruction manual serves as information for all its users. It describes the installation and handling of the device. The safety instructions and technical knowledge of the device are detailed in this manual. They are essential conditions for the proper use of professional equipment.
Each user must scrupulously respect all the instructions for use. This user manual must be kept next to the product for proper use and access to the instructions at all times for each user.

Description of symbols

Information, advice on use and safety instructions are represented by symbols. It is essential to follow these instructions in order to avoid material damage and bodily injury.

WARNING
This symbol means that a hazard exists that could lead to personal injury. Concentration and caution are imperative to operate this device.

ELECTRICAL HAZARD
This means that there is a danger related to electric current. Failure to follow the instructions can lead to the risk of injury and death.

WARNING
This symbol is used to indicate that non-compliance with the instructions may lead to a breakdown or the destruction of the device.

REMARK
This symbol indicates good practices and advice that must be applied for efficient use of the device.

REMARK
It is essential to read this user manual before commissioning the device. We do not accept any liability for damage and breakdowns resulting from non- compliance with the instructions for use. The Casselin company reserves the right to make any technical, informative or marketing changes to our product without notice.

Copyright

The user manual is protected by copyright law. Reproductions of any kind and in any form – even partial – as well as the exploitation and/or transmission of its contents are not permitted without our permission. Any violation of these provisions entitles you to damages. Other rights remain reserved.

Declaration of Conformity

The device corresponds to the current standards and directives of the European Union. We confirm this in the CE declaration of conformity.

Warranty

The instructions given in this user manual have been drawn up taking into account the regulations in force, current technical development, our knowledge and experience. All translations have been professionally prepared. However, we decline all responsibility in the event of a translation error. The attached French version is authentic.

SECURITY

Safety instructions serve to avert dangers. They are mentioned in the individual chapters and are characterized by symbols. Observance of these guarantees optimum protection against risks and enables ideal operation of the device. The safety instructions must be available and legible on the devices.

Principles

The safety instructions are established to avoid errors, dangerous uses and breakdowns. Therefore, the device must not be modified or used for improper use. The device is designed according to technical rules currently being developed. This notice must be kept. The appliance must only be used in premises provided for this purpose by a responsible person who is familiar with the operation of the appliance.

Intended use

The operation of the device and the safety of use are only guaranteed in the event of normal and compliant use of the device. Assembly and technical interventions must be carried out by professionals.

WARNING
Any other use is considered improper. Any charges related to improper use of the device are not admissible and will be forfeited. Proper use corresponds to use described in this user manual. Proper use corresponds to compliance with safety, hygiene, cleaning and maintenance rules.

Safety instructions when using the device

The indications relating to occupational safety refer to the regulations of the European Union valid at the time of manufacture of the device. For commercial use of the device, the operator undertakes, throughout the duration of its use, to note the conformity of the measures cited in terms of work safety with the current state of the arsenal of advice and to comply with the new regulations.
For countries outside the EU, the laws and provisions of the country must be observed. All environmental protection provisions must also be observed.

WARNING
The device must be handled by people with sufficient physical and intellectual means. People with limited physical and intellectual means must be supervised to use this device. Use prohibited for children and minors (exceptions made within a legal framework provided for by law) If the device is used by a third party, the instructions for use must be available before any use. Any new user must have read the instructions for use. The device must only be used in rooms intended for this purpose.

TRANSPORT, PACKAGING AND STORAGE

Inspection after transport

Verification of the absence of damage and the integrity of the device must be carried out upon receipt of the package. In case of identification of damage due to transport, refuse or accept the product delivered only under reserve. A complaint detailing the defects observed must then be made. The perception of damages is only possible in the event of a complaint formulated within the time limits provided, ie 24-48 hours at the most.
written on the right paper or digital delivery from the carrier

Packaging

The packaging of the device must be kept in the event of a move, or for a return to the after-sales service.
The interior and exterior packaging must be completely removed before using the device. The standards in force in your country concerning the protection of the environment must be respected before destroying the packaging.

Storage

WARNING
The storage of the device in stock can be done but only in its original closed packaging.
Storage can be carried out under these conditions:

Storage in a dry, non-humid place
Sheltered from the sun
Control of stock for more than 2 months (general condition of the device and all the elements that make it up)
No material shaking
Storage in a closed room and not outside.

MATERIAL CHARACTERISTICS

Subject to change

Model	CPAST480	CPAST520	CPAST700
Dimensions plates	480 x 306mm	515 x 340mm	700 x 400mm
Electrical data	2800W / 230V	3600W / 230V	7000W / 400V
Dimensions	W 484 x D 559 x H 354 mm	W 519 x D 592 x H 354 mm	W 720 x D

706.5 x H 354mm
Weight| 23.50Kg| 29kg| 45.5kg

INSTALLATION AND USE

Safety instructions

ELECTRICAL HAZARD

Danger due to electric current!

No contact with heat sources should take place with the electrical cord.
The cord should not hang over the edge of a table or counter.
Do not pour water into an appliance that is in operation or still hot.
The device must be properly connected and comply with the regulations in force

WARNING
While operating, the device can reach high temperatures. To avoid burns and accidents, do not use the device if it is malfunctioning, and do not use non- original spare parts.

ELECTRICAL HAZARD
Danger due to electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data of the electrical network. Connect the device only when there is compliance. The device must be unpacked and fully checked before connection by a professional.

Use

WARNING
The setting up of the device installation and maintenance should only be carried out by professionals.

Do not leave the appliance running without watching it.
During use, your hands must be dry.
Do not move or tilt the device during operation.

MANUAL

COMMISSIONING
The device must be completely removed from its packaging. All guards must be fully withdrawn. Place the appliance on a solid, flat surface Never put the griddle on a flammable surface.
Do not install this device near open fires or other heating devices.
The electrical cable must be protected to at least 16 Amps. The device must be plugged directly into a wall outlet. Using a power strip will trip the device.
Heat the unit for 10 minutes until all the smoke and smell are dissipated. Switch off and unplug the appliance, then use hot soapy water to clean the plates in stainless steel. NEVER use cold water on the stainless steel plates because you risk causing a shock thermal.

USE
Plug in the device, once plugged in the red light comes on.
Turn the griddle temperature adjustment knob. The green light comes on The temperature can be between 140° and 300°C.
We recommend that you use this device at a maximum temperature of 220°C. It varies according to the types of food to be cooked.
In 10 minutes, the temperature of 220°C is reached. Once the desired temperature has been reached, the indicator green goes out. When the temperature decreases, the device starts heating again and the green light turns on again until the correct temperature is reached.
Turn the toaster temperature control knob. The green light comes on The general cooking position is 5-6, this may vary depending on the type of food. Once the desired temperature is reached, the green light goes out. When the temperature decreases, the device starts heating again and the green light turns on again EN until the correct temperature is reached. If you are not using the appliance, turn off the thermostat, turn off the On/Off switch and unplug the appliance.

REMARK

The appliance is equipped with a safety system in case of overheating. In case of tripping, disconnect appliance and let it cool down. If this protection system activates regularly, it is imperative to contact our after-sales service or your retailer.
After automatic shutdown, the device can only be put into operation by pressing the Reset button on the back of the device. To do this, wait for the oil temperature to drop, then unscrew the protection plastic by turning anti- clockwise, press the reset button then screw the plastic protection back on.

CLEANING AND MAINTENANCE

Safety instructions

Any maintenance, cleaning, repair of the appliance must be done with the appliance unplugged (isolated from all electrical sources).
The use of caustic detergents and baking soda for cleaning is prohibited. Water must not get inside the device.
Never immerse the appliance in water or any other liquid.
Use the Casselin brand products provided for this purpose.

WARNING
The device cannot be cleaned with a direct water jet (no pressurized water jet).

Daily maintenance

Unplug the device Let the device cool down
Clean the appliance after each use, including the grease collection tray.
Clean the device with warm water and a clean cloth after each use.
After cleaning, use a soft, dry cloth to polish and dry the device. All parts must be dried.
Never use hard or abrasive material that could scratch the device and damage it. Do not use of chlorine or derivative solution.
After each cleaning apply a vegetable oil on the surface of the plate. Store the device in a dry place.

Safety instructions for the maintenance of the device

Daily check that the power cord is not damaged. Never use the appliance when the cord is damaged. If the cord has any faults, it must be replaced by a qualified technician.
In the event of a fault, contact your dealer.
Any maintenance or repair work should only be carried out by a professional.

REMARK
In the event of a trip, unplug the appliance, let it cool down and contact your retailer. If the unit does not start, check your power cord. The device must not be plugged into a power strip but directly into a wall socket. For any other anomaly, contact your dealer.
REMARK
Waste from used devices: all used devices must, when disposed of, comply with the regulations in force in their country*. It is imperative to make the device unusable before disposal by removing the power supply cable.

IRREGULAR OPERATION

The appliance does not work, the heating indicator light does not come on.|

The power cable is not plugged in.
The power supply fuse has tripped.
The power supply box does not work.
The safety thermostat has tripped.
The safety thermostat is damaged.

|

Connect the power cable correctly.
Check all of your fuses.
Check the location of the box.
Press the reset button located in the housing.
Contact your dealer.

---|---|---
The device is on but not heating. The heating indicator lamp remains off.|

The safety thermostat has activated.
The resistor no longer works.
Contact with damaged heating element.

| Contact your dealer.
The requested temperature is not reached.| The thermostat is damaged.| Contact your dealer.
The heating element switches off after a certain time.| The safety thermostat has started.| Press the Reset button in the distribution box.

REMARK
The malfunctions mentioned above are only cited as an indication and remain virtual. If you have any doubts, contact your dealer.