SIGOR 2200 Rechargeable LED Table Lamp Instruction Manual

: June 16, 2024
: SIGOR

Table of Contents

SIGOR 2200 Rechargeable LED Table Lamp
Product Information
Product Usage Instructions
FAQ
What’s In The Box
Use purpose
Technical Specification
Dimension
Charger
Use Instructions
Installation And Using Instruction
Important Notice
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SIGOR 2200 Rechargeable LED Table Lamp

Product Information

Specifications:

Brand: Sigor Licht GmbH
Model: Nuindie tango
Type: LED Rechargeable Table Lamp
Features: Touch-switch, dimmable, FlexMood
Color Temperature Options: 2,700 K warm white and 2,200 K extra warm

Product Usage Instructions

Purpose:
This product is intended for lighting purposes only. It should not be subjected to heavy mechanical loads or strong pollution. The lamp is designed for indoor use. Clean the lamp with a mild soap solution and protect it from aggressive atmospheres.

Instructions:

Remove the protective cover before the first use and fully charge the battery.
While charging, the indicator light at the top will be red. It will turn off when fully charged.
Touch the touch-switch:
- First touch: Turns on the luminaire with 2,700 K warm white light.
- Second touch: Changes the light color to 2,200 K extra warm.
- Third touch: Turns off the luminaire.
To adjust the light intensity:
- Press and hold the touch switch to gradually increase the light intensity. After four seconds, the light reaches full intensity.
- Press and hold the switch again to decrease the light intensity.

FAQ

Q: Can I use the lamp outdoors?

A: No, this lamp is designed for indoor use only.

Q: How do I clean the lamp?

A: Clean the lamp with a mild soap solution and avoid exposure to aggressive atmospheres.

Q: What are the different light color options?

A: The lamp offers two color temperature options - 2,700 K warm white and 2,200 K extra warm.

What’s In The Box

Use purpose

This product is meant to be used for lighting only. It must not be exposed to heavy mechanical load or strong pollution.
The light is intended for indoor use. Clean only with mild soap solution, protect from an aggressive atmosphere.

Technical Specification

Power: 2.2 W
Voltage: DC 3.7 V
Luminous flux: at 2,200 K 168 lm, at 2,700 K 197 lm
Luminous color: 2,200 K and 2,700 K
CRI: 85
Number of LED: 46
Rechargeable battery: Li-Ion, 2×2200 mAH
Charging time: 5–7 h h
Battery life: up to 12 h
Protection class IEC: III, SELV
Ingress protection code: IP20
Dimmable: Yes, max. 20 %

Dimension

Charger

Input: 100–240 V ~, 50/60 Hz
Output: 5 V, 1 A
Length of cable: 1.2 m

Use Instructions

Before first use, please remove the protective cover and fully charge the battery.
When charging, the indicator light at the top is red. When fully charged, it turns off.
With the first touch of the touch-switch, you switch the luminaire on with 2,700 K warm white. With the second touch, you switch the light color to 2,200 K extra warm. With the third touch, you switch the luminaire off again.
Press and hold the touch switch to gradually increase the light intensity. After four seconds, the light has reached its full light intensity. Press and hold the switch again to lower the light intensity again.

Installation And Using Instruction

Important Notice

The support surface for the lamp must not exceed a 15° tilt or it will fall.
The battery has an overcharge protection and can be replaced.
In case of need of repair, return to your local dealer.
Only use the supplied power supply unit for charging!
The old device and battery must be disposed of separately from household waste. Please observe the disposal instructions in your city or municipality.