nVent CADDY ENDCA120EG Endc Strut End Cap Owner’s Manual
- June 16, 2024
- nVent Caddy
Table of Contents
nVent CADDY ENDCA120EG Endc Strut End Cap
FEATURES
Fits into ERISTRUT Type A channel
PRODUCT ATTRIBUTES
- Material: Steel
- Finish : Electrogalvanized
- Strut Type: A (1 5/8″ x 1 5/8″)
- Thickness: 12 ga
- A: 1 5/8″
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands: +31 800-0200135
- France: +33 800 901 793
2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>