Shark Genius S6000 Series Steam Pocket Mop System FAQs
- June 2, 2024
- Shark
Table of Contents
Shark Genius S6000 Series Steam Pocket Mop System FAQs
FAQs
This article contains the FAQs for the S6000 Series Shark® Genius™ Steam Pocket® Mop System. This supports the following SKUs S6001W, S6001WM, S6002, S6002C, S6003D and S6003W.
How do I know when the pads need to be replaced?
For best cleaning results, replace your Dirt Grip pads every 3 to 4 months following normal use.
You can also purchase replacement Dirt Grip pads here
How often should I wash the Dirt Grip Pads?
For optimal performance, wash Dirt Grip pads after every use, and start each cleaning with a freshly laundered pad. Machine-wash the Dirt Grip pads separately with warm water, using liquid detergent. Never use bleach, powdered detergent or fabric softeners as they may damage or leave a coating on the pads. Dirt Grip pads should be line-dried or tumble-dried on a low setting.
How do I turn the Steam Mop off?
To turn off your Steam Mop, unplug the cord from the wall outlet and the unit will automatically cool and shut off.
How do I store my Steam Mop?
Empty all water from the unit before storing. Remove the Dirt Grip pad if it has been used, and clean it after every use. Never store the mop with a dirty pad on the mophead. It is not necessary to remove the Genius Mop Head when it is being stored.
What are the dimensions of the Steam Mop?
47.1 in (120 cm) x 13.8 in (35 cm) x 7 in (17.8 cm)
What cleaning accessories are available to use with the Shark Genius Steam Pocket Mop System?
Shark offers a full assortment of accessories to help with your cleaning needs. Some of these accessories may be included with the steam mop you purchased. All of the accessories listed below are compatible with your Shark Genius Steam Mop.
– Rectangular Scrubber with Steam Blaster: the rectangle shaped head with
scrubber is perfect to scrub away tough stains, and use the Steam Blaster for
extra steam power to handle stuck-on messes.
-Triangle Scrubber with Steam Blaster: the triangle shaped head is perfect for getting into corners and other hard-to-reach spaces. The Steam Blaster offers a concentrated burst of powerful steam for tough stains.
– Dirt Grip pads:
2-pad package that fits the Genius Mop head
2-pad package that fits the Triangle Scrubber head with Steam Blaster
2-pad package that fits the Rectangular Scrubber head
-Pad storage bag: comes with separate storage compartments for both new pads and used ones, so your new pads always stay clean.
What is the Shark Genius Steam Pocket Mop made of?
A combination of durable ABS and PP plastics, along with some metal and rubber components.
What is the Shark Genius Steam Pocket Mop System advantage?
The Shark Genius Steam Pocket Mop System is our most advanced floor system
ever, with next-generation features like the Genius mop head with Touch-Free
Technology, Dirt Grip pads and Steam Blaster technology.
The Genius Steam Mop not only deep cleans your floors amazingly well, but also
sanitizes* sealed hard floor surfaces without chemicals, when and where you
need it.
The completely redesigned Direct Steam Channeling system delivers steam
directly onto stains, for excellent hard floor cleaning.
- Sanitization studies were conducted under controlled test conditions. Household conditions and results may vary. With Genius Head in HI mode only when used with steam mop. Not when using Steam Blaster.
What is the story and technology behind the Genius Mop Head?
The new Shark Genius Mop Head incorporates many innovative features to make cleaning your home easier than ever before. Shark’s Touch-Free Technology means there’s no more wringing out mops or wrestling with dirty pads. Quickly attach a Dirt Grip pad and start mopping in seconds. When you are done, just pinch the pad release button and the used pad falls away automatically you’ll never have to touch a dirty pad again. You’ll get extra-targeted steam power with our Steam Blaster technology. Just flip the Genius mop head over and tilt the mop handle back to activate the Steam Blaster for a powerful burst of targeted steam. The Steam Blaster attacks tough, stuck-on messes, and easily loosens debris from grout lines, crevices and corners
What is the total cord length?
The cord length is 22.4 feet
What is the weight of the Steam Mop?
-S6001 – 5.7 lbs. (2.6kg)
-S6002 – 6.0 lbs. (2.75kg)
-S6003 – 6.0 lbs. (2.75kg)
What surfaces can I use the Steam Mop on?
The Steam Mop is designed for use on all sealed hard-floor surfaces. We
recommend that you first Test an isolated area of the floor surface to be
cleaned as well as review the use and care instructions from your floor
manufacturer.
WARNING: Do not use on leather, wax-polished furniture, synthetic
fabrics, velvet, or other delicate, Steam-sensitive materials.
NOTE: on surfaces treated with wax and on some no-wax floors, the sheen
may be removed by the heat or Steam action of the unit.
Test an isolated area of flooring first to see if sheen is affected.
Which accessories can be stored onboard the Spray Pocket Mop?
The filling flask can be stored onboard the Steam Mop for quick access. If your unit comes with the Spray Pocket Mop the Spray bottle can be stored on the handle of the Spray Pocket Mop so your cleaning solution is always handy and ready
Will the lights burn out?
The LED lights in the front panel should not burn out.
Can I put something other than water in the water tank of the Steam Mop?
For optimal performance, wash Dirt Grip pads after every use, and start each cleaning with a freshly laundered pad. Machine-wash the Dirt Grip pads separately with warm water, using liquid detergent. Never use bleach, powdered detergent or fabric softeners as they may damage or leave a coating on the pads. Dirt Grip pads should be line-dried or tumble-dried on a low setting.
Can I use the Steam Mop on carpets?
The Steam Mop is not designed for carpet cleaning.
How do I attach the accessories to my Steam Mop?
In order to attach a mop head to the body of the Shark Genius Steam Pocket Mop, simply align the red portion of the Genius Mop Head (which reads “WARNING: HOT STEAM”) with the Head Release button on the front of the Steam Mop Body. Push the mop head and the mop body together until you hear a click, which indicates that the two parts are joined properly.