HERTZ MPS 250 S4 Car Audio Systems Owner’s Manual

HERTZ MPS 250 S4 Car Audio Systems Owner’s Manual

Hertz Warranty

The Hertz products are warranted, under normal functioning conditions, for the period of time as set by the laws in force, against defects concerning materials or their manufacturing. The warranty is valid from the date of purchase, certified by receipt. The warranty is not valid if:

• the product is damaged by incidents, installations and/or improper use, or by any other causes not depending on materials or manufacturing defects;
•  the product is modified or tampered with by unauthorised people;
• its serial number has been altered or cancelled.

While the product is under warranty, defective parts will be repaired or replaced at the manufacturer’s discretion. The defective product, along with notification about it, must be returned to the dealer from which it was purchased together with the warranty certificate duly filled in. If the product is no longer under warranty, it will be repaired at the current costs. Elettromedia s.r.l. does not undertake any liability for damages due to transportation. Elettromedia s.r.l. does not take any responsibility for: costs or loss of profit due to the impossibility to use the product, other accidentalor consequential costs, expenses or damages suffered by the customer. Warranty according to laws in force.For more information visit the Hertz website.

Dimensions

MP 250 D2.3 / MP 250 D4.3 – MP 300 D2.3 / MP 300 D4.3

MPS 250 S2 / MPS 250 S4 – MPS 300 S2 / MPS 300 S4

| A| B| B 1| C| D| E| F| U| V| S|
---|---|---|---|---|---|---|---|---|---|---|---
MP 250 D2. 3 / MP 250 D4. 3| 268| 236| 39| 160| 141| 274| 58,5| 250| 5,5| 3,50| mm
10.55| 9.29| 1.54| 6.3| 5.55| 10.79| 2.3| 9.84| 0.22| 0.14| in.
MP 300 D2. 3 / MP 300 D4. 3| 321| 287| 39| 187| 164| 328| 60| 302| 5,5| 3,5| mm
12.64| 11.3| 1.54| 7.36| 6.46| 12.91| 2.36| 11.89| 0.22| 0.74| in.
MPS 250 S2 / MPS 250 S4| 274,5| 231,6| –| 103,2| 82,6| 244,6| 38,9| 255| 5,5| –| mm
10.81| 9.12| –| 4.06| 3.25| 9.63| 1.53| 10.04| 0.22| –| in.
MPS 300 S2 / MPS 300 S4| 318,3| 282,5| –| 108,88| 88| 291,8| 42,6| 302| 5,5| –| mm
12.53| 11.12| –| 4.29| 3.46| 11.49| 1.68| 11.89| 0.22| –| in.

Connections

MPBX 250 S2 / MPBX 300 S2

MPBX 250 S2 / MPBX 300 S2

HOW TO REMOVE

• REMOVE THIS SCREW
  

• REMOVE THE MESH
  

• Accessory Included
  

• ROTATE 90° THE MESH
  

• INSERT THE MESH & SCREW BACK ON
  

Mounting

IMPEDANCE| MP 250 D2 . 3 MP 250 D2 . 3| MP 250 D4 . 3 MP 300 D4 . 3|
---|---|---|---
1 Speaker| 2+2| 4+4| Ω
1 Speaker series| 4| 8| Ω
1 Speaker parallel| 1| 2| Ω
2 Speakers parallel – parallel| –| 1| Ω
2 Speakers series – parallel| 2| 4| Ω
3 Speakers series – parallel| 1.3| 2.6| Ω

Connections

MP 250 D2.3 / MP 250 D4.3 – MP 300 D2.3 / MP 300 D4.3

Mounting

MPS 250 S2 / MPS 250 S4 – MPS 300 S2 / MPS 300 S4

HOW TO REMOVE

WARNING:

Pay attention not to damage the surround.

Connections

FREE AIR DC RESISTANCE| MPS 250 S2| MPS 300 S2| MPS 250 S4
MPS 300 S4|
---|---|---|---|---
1 Speaker| 2,2| 1,9| 3,4| Ω
Series
2 Speaker
3 Speaker
4 Speaker| 4,4| 3,8| 6,8| Ω
6,6| 5,7| 10,2| Ω
8,8| 7,6| 13,6| Ω
2 Speaker| 1,1| 1| 1,7| Ω
Parallel
3 Speaker
4 Speaker| 0,7| 0,6| 1,1| Ω
0,6| 0,5| 0,9| Ω
4 Speaker| 2,2| 1,9| 3,4| Ω
Mixed
6 Speaker
8 Speaker| 1,5| 1,3| 2,3| Ω
1,1| 1| 1,7| Ω

Technical specifications

| Component| Size| Power handling| Impedance| Magnet Size| Voice Coil ∅| Magnet| Cone| Weight of one component
---|---|---|---|---|---|---|---|---|---
Peak| Continuous
mm (in.)| W| W| Ω| mm (in.)| mm (in.)| Kg (lb.)
MP 250 D2. 3| Subwoofer| 250(10)| 1200| 600| 2 + 2| 165 x 75 x 35(6.5 x2.95 x1.38)| 65(2.56)| High density flux ferrite| Pressed-pulp cone with mineral powders| ** 8,2 (18.08)
MP 250 D4. 3| ** Subwoofer| 250(10)| 1200| 600| 4 + 4| 156 x 80 x 35(6.14 x3.15 x1.38)| 65(2.56)| High density flux ferrite| Pressed-pulp cone with mineral powders| 7,8 (17.2)
MP 300 D2. 3| Subwoofer| 300(12)| 1200| 600| 2 + 2| 165 x 75 x 35(6.5 x2.95 x1.38)| 65(2.5)| High density flux ferrite| Pressed-pulp cone with mineral powders| 8,63(19.03)
MP 300 D4. 3| Subwoofer| 300(12)| 1200| 600| 4 + 4| 165 x 75 x 35(6.5 x2.95 x1.38)| 65(2.56)| High density flux ferrite| Pressed-pulp cone with mineral powders| 8,63(19.03)
MPS 250 S2. 3| Subwoofer| 250(10)| 1000| 500| 2| 134 x 55 x 36(6.28 x2.17 x1.42)| 38(1.5)| High density flux ferrite| ** Polypropylene| 5,11(11.27)
MPS 250 S4. 3| ** Subwoofer| 250(10)| 1000| 500| 4| 134 x 55 x 36(6.28 x2.17 x1.42)| 38(1.5)| High density flux ferrite| Polypropylene| 5,11(11.27)
MPS 300 S2. 3| Subwoofer| 300(12)| 1000| 500| 2| 156 x 60 x 36(6.14 x2.36 x1.42)| 38(1.5)| High density flux ferrite| ** Polypropylene| 6,64(14.64)
MPS 300 S4. 3| ** Subwoofer| 300(12)| 1000| 500| 4| 156 x 60 x 36(6.14 x2.36 x1.42)| 38(1.5)| High density flux ferrite| Polypropylene| 6,64(14.64)

| Component| Size| Power handling| Impedance| Dimensions **W x H x D| Voice Coil ∅| Magnet| Dome/Cone| Weight of one component
---|---|---|---|---|---|---|---|---|---
Peak| Continuous
mm (in.)| W| W| Ω| mm (in.)| mm (in.)| Kg (lb.)
MPBX 250 S2| Passive Subwoofer Sealed box| 250(10)| ** 1000| 500| 2| 531 x 160 x 361(20.91 x 6.3 x 14.21)| 38(1.5)| High density flux ferrite| Polypropylene| 10,8 (23.8)
MPBX 300 S2| Passive Subwoofer Sealed box| 300(12)| 1000| 500| 2| 607 x 175 x 401(23.9 x 6.89 x 15.79)| 38(1.5)| High density flux ferrite| Polypropylene| **** 13,6 (30)

ENCLOSURE DESIGN MP

In the following pages the Hertz Tech Team developed Sealed and Reflex designs for MP and MPS subwoofers. They are ready-to-build solutions, including the panel cut list, considering wood thickness 19mm (0.75in.) for MP and 16mm (0.63in.) for MPS series.

The Vb data is the net volume for the enclosure, i.e. it excludes the speaker volume, ports, any internal bracing and any other internal component.

The declared Fb is the actual tuning frequency of the box realized according to the ready-to-build solution. This geometry can not be accurately modeled using lumped parameter based design software, hence those software may produce different results.

• REGULAR

• SHALLOW
  

Regular and Shallow variants for MPS series provide the same performance in just a different shape. Regular has the widest application while Shallow is the “solution” where low-depth is a matter.

Sealed enclosure designs provide optimally damped response for tight and accurate bass reproduction offering high energy in the range 20Hz-40Hz.

Where a high SPL bass is desired, and space is not a problem, the Reflex designs are the best choice concentrating most of energy in the 40Hz-80Hz range.

Assembly Instruction

ENCLOSURE DESIGN MP 250 D2

DAMPING MATERIAL BOX ASSEMBLY AND SHAPE
This manual features the box assemblies and shapes which are easiest to create. However, the bass frequency performance can  be noticeably  improved with different box shapes, assembly methods and construction  materials.

BOX TECH DATA| | Vb| Fc / Fb| Qtc| External dimensions (Pic .1)| Mounting Hole – M| Wood Thickness| PxS-Port inner size| Lp-Port lenght| Damping Material
---|---|---|---|---|---|---|---|---|---|---
W| H| D| P| S
l (cu. ft.)| Hz| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)
MP 250 D2. 3| | 17| 50| 0,85| 450| 350| 190| 236| 19| –| –| –| Pic. 1
Sealed (Fc)| (0.60)| (17.72)| (13.78)| (7.48)| (9.29)| (0.75)| –| –| –
MP 250 D4. 3| | 17| 47| 0,82| 450| 350| 190| 236| 19| –| –| –| Pic. 1
Sealed (Fc)| (0.60)| (17.72)| (13.78)| (7.48)| (9.29)| (0.75)| –| –| –
MP 250 D2/D4. 3| | 24,5| 38| –| 568| 330| 276| 236| 19| 292| 50| 670| Pic. 2
Reflex (Fb)| (0.96)| (22.36)| (12.99)| (10.87)| (9.29)| (0.75)| (11.50)| (1.97)| (26.38)

PANELS CUT LIST| | A| Qty| B| Qty| C| Qty
---|---|---|---|---|---|---|---
mm (in.)| Pcs| mm (in.)| Pcs| mm (in.)| Pcs
MP 250 D2/D4. 3 Sealed| | 450 X 350(17.72 x 13.78)| 2| 450 x 152(17.72 x 5.98)| 2| 312 x152(12.28 x 5.98)| 2
MP 250 D2/D4. 3 Reflex| | 568 x 330(22.36 x 12.99)| 2| 568 x 238(22.36 x 9.37)| 2| 292 x 238(11.50 x 9.37)| 2

DAMPING MATERIAL BOX ASSEMBLY AND SHAPE

This manual features the box assemblies and shapes which are easiest to create. However, the bass frequency performance can be noticeably improved with different box shapes, assembly methods and construction materials.

FILTER| Suggested Subsonic filter cut-off| Suggested Lo-pass filter cut-off
---|---|---
MP 250 D2/D4. 3 Sealed| 15 Hz / 24dB Oct| 70-80 Hz / 24 db Oct
MP 250 D2/D4. 3 Reflex| 20 Hz / 24dB Oct| 60-70 Hz / 24 db Oct

ENCLOSURE DESIGN MP 300 D2

DAMPING MATERIAL BOX ASSEMBLY AND SHAPE

This manual features the box assemblies and shapes which are easiest to create. However, the bass frequency performance can be noticeably  improved with different box shapes, assembly methods and construction materials.

BOX TECH DATA| | Vb| Fc / Fb| Qtc| External dimensions (Pic .1)| Mounting Hole – M| Wood Thickness| PxS-Port inner size| Lp-Port lenght| Damping Material
---|---|---|---|---|---|---|---|---|---|---
W| H| D| P| S
l (cu. ft.)| Hz| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)
MP 300 D2. 3| | 28| 48| 1| 450| 360| 280| 287| 19| –| –| –| Pic. 3
Sealed (Fc)| (0.99)| (17.72)| (14.17)| (11.02)| (11.30)| (0.75)| –| –| –
MP 300 D4. 3| | 28| 48| 0,82| 450| 360| 280| 287| 19| –| –| –| Pic. 3
Sealed (Fc)| (0.99)| (17.72)| (14.17)| (11.02)| (11.30)| (0.75)| –| –| –
MP 300 D2/D4. 3| | 41| 35.6| –| 620| 390| 330| 287| 19| 352| 60| 744| Pic. 4
Reflex (Fb)| (1.61)| (24.41)| (15.35)| (12.99)| (11.30)| (0.75)| (13.86)| (2.36)| (29.29)

PANELS CUT LIST| | A| Qty| B| Qty| C| Qty
---|---|---|---|---|---|---|---
mm (in.)| Pcs| mm (in.)| Pcs| mm (in.)| Pcs
MP 300 D2/D4. 3 Sealed| | 450 X 360(17.72 x 14.17)| 2| 450 x 242(17.72 x 9.53)| 2| 322 x242(12.68 x 9.53)| 2
MP 300 D2/D4. 3 Reflex| | 620 x 390(24.41 x 15.35)| 2| 620 x 292(24.41 x 11.50)| 2| 352 x 292(13.86 x 11.50)| 2

FILTER| Suggested Subsonic filter cut-off| Suggested Lo-pass filter cut-off
---|---|---
MP 300 D2/D4. 3 Sealed| 15 Hz / 24dB Oct| 70-80 Hz / 24 db Oct
MP 300 D2/D4. 3 Reflex| 20 Hz / 24dB Oct| 60-70 Hz / 24 db Oct

ENCLOSURE DESIGN MPS 250 S2

DAMPING MATERIAL BOX ASSEMBLY AND SHAPE

This manual features the box assemblies and shapes which are easiest to create. However, the bass frequency performance can be noticeably improved with different box shapes, assembly methods and construction materials.

BOX TECH DATA| | Vb| Fc| Qtc| External dimensions (Pic .1)| Mounting Hole – M| Wood Thickness| Damping Material
---|---|---|---|---|---|---|---|---
W| H| D
l (cu. ft.)| Hz| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)
MPS 250 S2| | 14,2| 47,7| 0,68| 615| 352| 110| 232| 16| Pic. 5
Sealed Shallow| (0.5)| (24.21)| (13.86)| (4.33)| (9.13)| (0.63)
MPS 250 S2| | 14,2| 47,7| 0,68| 386| 352| 160| 232| 16| Pic. 5
Sealed Regular| (0.5)| (15.2)| (13.86)| (6.30)| (9.13)| (0.63)
MPS 250 S4| | 14,2| 49| 0,81| 615| 352| 110| 232| 16| Pic. 5
Sealed Shallow| (0.5)| (24.21)| (13.86)| (4.33)| (9.13)| (0.63)
MPS 250 S4| | 14,2| 49| 0,81| 386| 352| 160| 232| 16| Pic. 5
Sealed Regular| (0.5)| (15.20)| (13.86)| (6.30)| (9.13)| (0.63)

FILTER| | Suggested Subsonic filter cut-off| Suggested Lo-pass filter cut-off
---|---|---|---
MPS 250 S2/S4 Sealed| | 15 Hz / 24dB Oct| 70-80 Hz / 24 db Oct
MPS 250 S2/S4 Reflex| | 20 Hz / 24dB Oct| 60-70 Hz / 24 db Oct

DAMPING MATERIAL BOX ASSEMBLY AND SHAPE

This manual features the box assemblies and shapes which are easiest to create. However, the bass frequency performance can be  noticeably improved with different box shapes, assembly methods and construction materials.

BOX

TECH DATA

| Vb| Fb| External dimensions (Pic .1)| Mounting Hole – M| Wood Thickness| | PxS-Port inner size| Lp- Port lenght| Damping Material
---|---|---|---|---|---|---|---|---|---
W| H| D| Z| P| S
l (cu. ft.)| Hz| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)
MPS 250 S2| 17| 35| 817| 372| 110| 232| 16| 146| 78| 63,7| 565| Pic. 6
Reflex Shallow| (0.6)| (32.17)| (14.65)| (4.33)| (9.13)| (0.63)| (5.75)| (3.07)| (2.51)| (22.24)
MPS 250 S2| 17| 35| 660| 372| 130| 232| 16| 146| 98| 50,7| 565| Pic. 6
Reflex Regular| (0.6)| (25.98)| (14.65)| (5.12)| (9.13)| (0.63)| (5.75)| (3.86)| (2)| (22.24)
MPS 250 S4| 19| 35,5| 882| 372| 110| 232| 16| 146| 78| 65,7| 511| Pic. 6
Reflex Shallow| (0.7)| (34.72)| (14.65)| (4.33)| (9.13)| (0.63)| (5.75)| (3.07)| (2.59)| (20.12)
MPS 250 S4| 19| 35,5| 713| 372| 130| 232| 16| 146| 98| 52,3| 511| Pic. 6
Reflex Regular| (0.7)| (28.07)| (14.65)| (5.12)| (9.13)| (0.63)| (5.75)| (3.86)| 2.06| (20.12)

PANELS CUT LIST| A| Qty| B| Qty| C| Qty| D| Qty| E| Qty
---|---|---|---|---|---|---|---|---|---|---
mm (in.)| Pcs| mm (in.)| Pcs| mm (in.)| Pcs| mm (in.)| Pcs| mm (in.)| Pcs
MPS 250 S2 Reflex Shallow| 817 x 372(32.17 x 14.65)| 2| 817 x 78(32.17 x 3.07)| 2| 340 x 7813.39 x 3.07| 1| 276 x 7810.87 x 3.07| 1| 549 x 7821.61 x 3.07| 1
MPS 250 S2 Reflex Regular| 660 x 372(25.98 x 14.65)| 2| 660 x 98(25.98 x 3.86)| 2| 340 x 98(13.39 x 3.86)| 1| 289 x 9811.38 x 3.86| 1| 549 x 9821.68 x 3.86| 1
MPS 250 S4 Reflex Shallow| 882 x 372(34.72 x 14.65)| 2| 882 x 78(34.72 x 3.07)| 2| 340 x 78(13.39 x 3.07)| 1| 274 x 78(10.79 x 3.07)| 1| 495 x 78(19.49 x 3.07)| 1
MPS 250 S4 Reflex Regular| 713 x 372(28.07 x 14.65)| 2| 713 x 98(28.07 x 3.86)| 2| 340 x 98(13.39 x 3.86)| 1| 288 x 98(11.34 x 3.86)| 1| 495 x 98(19.49 x 3.86)| 1

ENCLOSURE DESIGN MPS 300 S2

DAMPING MATERIAL BOX ASSEMBLY AND SHAPE

This manual features the box assemblies and shapes which are easiest to create. However, the bass frequency performance can be noticeably improved with different box shapes, assembly methods and construction materials.

BOX TECH DATA| | Vb| Fc| Qtc| External dimensions (Pic .1)| Mounting Hole – M| Wood Thickness| Damping Material
---|---|---|---|---|---|---|---|---
W| H| D
l (cu. ft.)| Hz| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)
MPS 300 S2| | 22,7| 47| 0,68| 770| 406| 115| 283| 16| Pic. 7
Sealed Shallow| (0.8)| (30.31)| (15.98)| (4.53)| (11.14)| (0.63)
MPS 300 S2| | 22,7| 47| 0,68| 510| 406| 160| 283| 16| Pic. 7
Sealed Regular| (0.8)| (20.08)| (15.98)| (6.30)| (11.14)| (0.63)
MPS 300 S4| | 22,7| 45| 0,81| 770| 406| 115| 283| 16| Pic. 7
Sealed Shallow| (0.8)| (30.31)| (15.98)| (4.53)| (11.14)| (0.63)
MPS 300 S4| | 22,7| 45| 0,81| 510| 406| 160| 283| 16| Pic. 7
Sealed Regular| (0.8)| (20.08)| (15.98)| (6.30)| (11.14)| (0.63)

FILTER| | Suggested Subsonic filter cut-off| Suggested Lo-pass filter cut-off
---|---|---|---
MPS 300 S2/S4 Sealed| | 15 Hz / 24dB Oct| 70-80 Hz / 24 db Oct
MPS 300 S2/S4 Reflex| | 20 Hz / 24dB Oct| 60-70 Hz / 24 db Oct

REFLEX BOX ASSEMBLY

DAMPING MATERIAL BOX ASSEMBLY AND SHAPE

This manual features the box assemblies and shapes which are easiest to create. However, the bass frequency performance can be noticeably improved with different box shapes, assembly methods and construction materials.

BOX TECH DATA| Vb| Fb| External dimensions (Pic .1)| Mounting Hole – M| Wood Thickness| | PxS-Port inner size| Lp-Port lenght| Damping Material
---|---|---|---|---|---|---|---|---|---
W| H| D| Z| P| S
l (cu. ft.)| Hz| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)| mm (in.)
MPS 300 S2| 26.9| 34| 817| 372| 110| 283| 16| 146| 98| 82,9| 605| Pic. 8
Reflex Shallow| (0.9)| (32.17)| (14.65)| (4.33)| (11.14)| (0.63)| (5.75)| (3.86)| (3.26)| (23.82)
MPS 300 S2| 26.9| 34| 660| 372| 130| 283| 16| 146| 133| 61.1| 605| Pic. 8
Reflex Regular| (0.9)| (25.98)| (14.65)| (5.12)| (11.14)| (0.63)| (5.75)| (5.24)| (2.41)| (23.82)
MPS 300 S4| 36,8| 33| 882| 372| 110| 283| 16| 146| 98| 81,4| 460| Pic. 8
Reflex Shallow| (1.3)| (34.72)| (14.65)| (4.33)| (11.14)| (0.63)| (5.75)| (3.86)| (3.20)| (18.11)
MPS 300 S4| 36,8| 33| 713| 372| 130| 283| 16| 146| 133| 60| 460| Pic. 8
Reflex Regular| (1.3)| (28.07)| (14.65)| (5.12)| (11.14)| (0.63)| (5.75)| (5.24)| 2.36| (18.11)
PANELS CUT LIST| A| Qty| B| Qty| C| Qty| D| Qty| E| Qty
---|---|---|---|---|---|---|---|---|---|---
mm (in.)| Pcs| mm (in.)| Pcs| mm (in.)| Pcs| mm (in.)| Pcs| mm (in.)| Pcs
MPS 300 S2 Reflex Shallow| 895 x 422(35.24 x 16.61)| 2| 895 x 98(35.24 x 3.86)| 2| 390 x 98(15.35 x 3.86)| 1| 307 x 9812.09 x 3.86| 1| 589 x 9823.19 x 3.86| 1
MPS 300 S2 Reflex Regular| 690 x 411(27.17 x 16.18)| 2| 690 x 133(27.17 x 5.24)| 2| 379 x 133(14.92 x 5.24)| 1| 318 x 133(12.52 x 5.24)| 1| 589 x 13323.19 x 5.24| 1
MPS 300 S4 Reflex Shallow| 1112 x 422(43.78 x 16.61)| 2| 1112 x 98(43.78 x 3.86)| 2| 390 x 98(15.35 x 3.86)| 1| 309 x 98(12.17 x 3.86)| 1| 444 x 98(17.48 x 3.86)| 1
MPS 300 S4 Reflex Regular| 836 x 422(32.91 x 16.61)| 2| 836 x 133(32.91 x 5.24)| 2| 390 x 133(13.39 x 5.24)| 1| 330 x 133(12.99 x 5.24)| 1| 444 x 133(17.48 x 5.24)| 1

Electro-Acoustic parametres

MP 250 D2. 3 | MP 250 D4. 3 | MP 300 D2. 3 | MP 300 D4. 3 | MPS 250 S2| MPS 250 S4| MPS 300 S2| MPS 300 S4
---|---|---|---|---|---|---|---
D mm| 213| 213| 260| 260| 216,6| 216,6| 262,6| 262,6
Xmax mm| ± 17| ± 17| ± 17| ± 17| 16,8| 16,8| 16,8| 16,8
Re Ω| 0,85| 1,8| 1| 1,9| 2,2| 3,3| 1,9| 3,4
Fs Hz| 30| 27| 23| 24| 28| 29| 24| 23
Le mH| 0,65| 1,6| 0,63| 1,6| 2,67| 3,65| 1,48| 3,75
Vas l| 25| 31| 88| 74| 24,5| 21,2| 64,9| 62,1
Mms g| 182| 187| 221| 235| 250| 234| 295| 320
Cms mm/N| 0,14| 0,18| 0,22| 0,19| 0,13| 0,11| 0,16| 0,15
BL T•m| 7,1| 10,5| 7,7| 12| 14,7| 17,3| 12,3| 18,7
Qts| 0,54| 0,5| 0,48| 0,42| 0,41| 0,48| 0,51| 0,42
Qes| 0,6| 0,53| 0,53| 0,45| 0,45| 0,52| 0,55| 0,45
Qms| 5,92| 5,8| 5,9| 5,9| 5,3| 5,6| 7,5| 6,3
Spl dB| 83,5| 83,5| 86| 86| 82,5| 83,5| 84,5| 85

• The Thiele and Small parameters are measured with coils in parallel. For series coils specification multiply Re and Le by 4 and BL by 2, all other specifications remain the same.
• The Thiele and Small parameters are measured after the speaker has been conditioned by a specific signal and represent the expected long term parameters after a short period of use.

How To remove / Insert Mesh Grill

Warning:

Pay attention not to damage the surround.

TECHNICAL SPECIFICATIONS

ELECTRO-ACOUSTIC PARAMETERS

1. Ultra-shallow overall depth
2. 500W continuous power handling
3. Optimized for extremely-compact sealed enclosure 12-14L (0.4-0.5CF)
4. Air Intercooling Revolution (A.I.R.) prevents air-compression-related limitations
5. Unrivalled mechanical excursion, +20% over traditional designs
6. Six-layer copper voice coil (38mm/1.5 in.) ensures high thermal capacity
7. Non-vented rear design allows reduced enclosure depth
8. Robust screw-less mesh grille included with black screws provided
9. Die-cast aluminum frame
10. Solid horizontal 8AWG spring-loaded terminals
11. EID: Scan, Discover, Identify.
    
    

Costumers Support

Elettromedia:  62018 Potenza Picena (MC)
Italy:   T +39 0733 870 870
F :  +39 0733 870 880
www.elettromedia.it

References

• Home - Elettromedia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>