FORUM LIGHTING ZN-38602 Memphis Box Frame Lantern Instructions
- June 15, 2024
- Forum Lighting
Table of Contents
ZN-38602 Memphis Box Frame Lantern
Specifications
| Document Reference: | INS ZN 38602 – B |
|---|
Installation Steps
- Power OFF – Ensure that the power is turned OFF at the main electrical panel before starting the installation (Image A).
- Prepare Housing – Remove the cover of the electrical housing to expose the internal components, which may include screws and wall fixings (Image B).
- Mounting Plate – Attach the mounting plate to the wall surface using appropriate fixtures as shown in the brick wall representation (Image C).
- Wiring Connections – Make the correct wiring connections with ‘L’ (brown) and ‘N’ (blue) wires as depicted. Ensure safe and proper electrical connections according to local regulations (Image D).
- Reassemble Housing – Once the wiring is complete, reassemble the housing by attaching the cover back onto the main body (Image E).
- Power ON – After ensuring all components are securely in place and the wiring is properly insulated, turn the power back ON at the main electrical panel (Image F).
Notice Please take time to read this leaflet carefully and retain it for future reference.
FAQ
-
What should I do before starting the installation?
Ensure that the power is turned OFF at the main electrical panel before beginning any work. -
How do I prepare the housing for installation?
Remove the cover of the electrical housing to expose the internal components, which may include screws and wall fixings. -
What is the correct way to make wiring connections?
Connect the ‘L’ (brown) and ‘N’ (blue) wires as depicted in the diagram, ensuring all connections comply with local electrical codes and regulations. -
Is it necessary to turn the power OFF during installation?
Yes, it is crucial to turn the power OFF to prevent any electrical hazards and ensure a safe installation process.