Forum Lighting ZN-37938 Leto Fixed Wall Light Instruction Manual
- June 1, 2024
- Forum Lighting
Table of Contents
Forum Lighting ZN-37938 Leto Fixed Wall Light
Please take time to read this leaflet carefully and retain it for future reference.
Specifications
Requirement | Details |
---|---|
Bulb Type | 7W Max. GU10 LED Reflector Bulb |
Bulb Included | No |
Installation Steps
- Ensure the power is turned off at the circuit breaker before beginning installation (represented by the “OFF” image with a hand switching a circuit breaker).
- Mount the light fixture base to the wall as shown, with the wiring passing through the appropriate openings.
- Connect the wires from the wall to the fixture using the connection block provided (arrows indicate the position of the connection block).
- Secure the light fixture cover onto the base, ensuring it is properly aligned and secured.
- After installation, turn the power back on at the circuit breaker (as shown by the “ON” image with a hand switching a circuit breaker).
Adjustment Settings
-
Time
Adjust the time delay for the light from minimum to maximum (represented by a dial with a time symbol and “+/-” indicators). -
Lux
Adjust the ambient light level at which the light will activate (represented by a dial with a lux symbol and “+/-” indicators, with a range of “2-2000lux”). -
Sensitivity (SENS)
Adjust the sensitivity of the sensor to movement (represented by a dial with a SENS symbol and “+/-” indicators).
Additional Information
- The product has an IP65 rating, indicating it is dust-tight and protected against water jets from any direction.
- The diagrams also indicate the range of the sensor, with a person illustrated at a distance of “6+2M” from the light, showing the maximum detection range.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>