FORUM LIGHTING ZN-41101-RBRS Wall Light Installation Guide
- June 1, 2024
- Forum Lighting
Table of Contents
FORUM LIGHTING ZN-41101-RBRS Wall Light
USING INSTRUCTIONS
The diagram provides a step-by-step visual guide, titled “INS ZN 41101 – A,” for the installation process of an electrical device. Below is a detailed description of the diagram for visually impaired users:
- Step 1: Preparing the Device
- A picture of an electrical terminal block with several wires connected to it. The wires are not labeled in the image.
- Step 2: Turning the Device Off
- An arrow pointing counter-clockwise with the text “OFF” indicates that the device should be turned off before proceeding with the installation.
- Step 3: Wiring Connections
- An illustration of the terminal block from a side view with a wall or panel behind it.
- A screwdriver is shown detaching or attaching wires to the terminal block.
- The wires are labeled “Blue” and “Brown,” and the terminal block has labels “N” and “L” indicating where each wire should be connected.
- Step 4: Adjusting the Device
- A cylindrical device is shown in two segments, with an arrow indicating a twisting motion, suggesting that the two parts of the device should be screwed together or adjusted.
- Step 5: Securing the Device
- The same cylindrical device now appears to be in one piece, with an arrow pointing downwards, which may imply that the device should be pushed down to secure it in place.
- Step 6: Turning the Device On
- The electrical terminal block reappears with an arrow pointing clockwise and the text “ON,” indicating that the device can now be turned on after installation is complete.
- Please take time to read this leaflet carefully and retain it for future reference.
Specifications
| Document Title | INS ZN 41101 – A |
|---|---|
| Steps Illustrated | 6 |
| Power State Indicators | OFF and ON |
| Wire Colors Mentioned | Blue and Brown |
| Terminal Labels | N (Neutral) and L (Live) |
FAQs
What should I do before wiring the device?
Ensure the device is turned off, as indicated by the counter-clockwise arrow and OFF label in step 2 of the diagram.
How do I connect the wires to the terminal block?
Use a screwdriver to attach the blue wire to the terminal labeled N and the brown wire to the terminal labeled L, as shown in step 3.
What is the significance of the cylindrical device in steps 4 and 5?
The cylindrical device likely represents a component that needs to be adjusted by twisting and then secured by pushing down.
When is it safe to turn the device on?
After completing the installation steps, turn the device on as indicated by the clockwise arrow and ON label in step 6.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>