FORUM LIGHTING ZN-37940 Leto Fixed Up and Down Wall Light Instructions
- June 1, 2024
- Forum Lighting
Table of Contents
FORUM LIGHTING ZN-37940 Leto Fixed Up and Down Wall Light
Model: INS 37940 – A
Requirement:
REQUIRES 7W MAX. GU10 LED REFLECTOR BULB (BULB NOT INCLUDED)
Installation Steps
-
Step A: Prepare for Installation
Ensure the power is turned OFF at the mains circuit. -
Step B: Mounting the Bracket
Position and secure the mounting bracket (C) to the wall using appropriate fittings. -
Step C: Connecting the Wires
Connect the wires to the light fixture as shown, ensuring the ‘UP’ indicator on the bracket is oriented correctly. The wires should be connected as follows:- N (Neutral) – typically the blue wire,
- L (Live) – typically the brown or red wire.
-
Step D: Securing the Light Fixture
Attach the light fixture to the bracket (C) by aligning and pushing it into place until secure. -
Step E: Final Adjustments
Make any necessary adjustments to the position of the light fixture before securing it in place. -
Step F: Bulb Installation
Install the GU10 LED reflector bulb (not included) into the fixture. -
Step G: Test the Installation
Turn the power ON at the mains circuit and test the light fixture.
Specifications
| Item | Details |
|---|---|
| Model | INS 37940 – A |
| Bulb Type | 7W MAX. GU10 LED Reflector Bulb |
| Bulb Included | No |
FAQ
What type of bulb is required for this light fixture?
A 7W Max. GU10 LED reflector bulb is required for this light fixture.
Is the bulb included with the purchase?
No, the bulb is not included and must be purchased separately.
How do I ensure I have mounted the bracket correctly?
Ensure the 'UP' indicator on the bracket is pointing upwards when mounted.
What should I do if the light fixture does not work after installation?
Double-check your wire connections and ensure the bulb is properly installed and compatible. If the issue persists, consult a qualified electrician.
Please take time to read this leaflet carefully and retain it for future reference.