Forum Lighting ZN-32255-BLK EOS Wall Light Installation Guide
- June 1, 2024
- Forum Lighting
Table of Contents
Forum Lighting ZN-32255-BLK EOS Wall Light
Please take time to read this leaflet carefully and retain it for future reference.
Diagrams and Instructions
-
Figure A:
Illustration of a terminal block with a lever in the OFF position, indicating that the block should be turned counterclockwise to switch off. -
Figure B:
Diagram of a cylindrical device with arrows pointing upwards and downwards, suggesting vertical adjustment or installation. -
Figure C:
Image of the same cylindrical device with arrows pointing downwards and upwards, indicating a reverse of the vertical adjustment or installation. -
Figure D:
Side view of a fan-like object with screws, accompanied by curved arrows, which may imply rotation or the direction of assembly. -
Figure E:
Depiction of wiring connected to a terminal block, with labels ‘L’ for live wire (Brown), ‘N’ for neutral wire (Blue), and an earth symbol.
Figure F:
Image showing the cylindrical device partially inserted into a wall or panel, indicating the initial stage of installation. -
Figure G:
Similar to the previous figure, showing the cylindrical device fully inserted and secured into the wall or panel. -
Figure H:
Illustration of a terminal block with a lever in the ON position, indicating that the block should be turned clockwise to switch on.
Specifications
| Document Code | INS ZN 32255 – D |
|---|
FAQ
How do I properly install the cylindrical device? Refer to Figures B, F, and G for the correct installation steps, which include vertical adjustment and securing the device into a wall or panel. How do I connect the wiring to the terminal block? Figure E shows the wiring connections where the live (brown) and neutral (blue) wires must be connected to the labeled terminals, along with the earth connection. How do I operate the terminal block? To switch the terminal block on or off, turn the lever clockwise or counterclockwise as shown in Figures A and H, respectively.