nedis LTOUT05BK Rechargeable Table Lamp User Guide

June 15, 2024
nedis

nedis LTOUT05BK Rechargeable Table Lamp

Specifications

  • Product Name : Rechargeable Table Lamp
  • Model: LTOUT05BK
  • Control: Stepless dimmable touch control
  • Charging Port: USB-C
  • Charging Time: Minimum 3 hours

Product Usage Instructions

Quick Start Guide

  1. On/Off Button (A): Press the button to switch on the device.
  2. Light Mode (A): Press the on/off button to switch between warm, neutral, or cool white light.
  3. Adjust Brightness (A): Hold the on/off button to adjust the brightness of the light.
  4. USB-C Connector (B): Start charging the product by connecting the USB-C cable to both the wall charger and the device. Charge the product for at least 3 hours before initial use.

Safety Information
This document is the user manual and contains all the information for the correct, efficient, and safe use of the product. Ensure you have fully read and understood the instructions in this document before you use the product.

General Safety

  • Electrical Safety
  • Cleaning and Maintenance

Support: If you need further help or have comments or suggestions, please visit www.nedis.com/support

OVERVIEW

Quick start

Rechargeable table lamp

Safety

About this document
This document is the user manual and contains all the information for the correct, efficient and safe use of the product. Ensure you have fully read and understood the instructions in this document before you use the product.

General safety
Keep the manual for future reference.

  • This product is not intended for professional use.
  • The manufacturer is not liable for consequential damages or for damages to property or persons caused by non-observance of the safety instructions and improper use of the device.
  • Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
  • The device is suitable for domestic use only. Do not use the device for commercial purposes.
  • Do not cover the device.
  • Place the device on a stable, flat surface.
  • Keep the device away from flammable objects.
  • Do not forget to recharge the battery every 3 months when not used for a longer period.

Electrical safety

  • To reduce the risk of electric shock, this product should only be opened by an authorized technician when service is required.
  • Disconnect the product from the mains and other equipment if a problem should occur.
  • Do not use the device if the mains cable or mains plug is damaged or defective. If the mains cable or mains plug is
  • damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.
  • Before use, always check that the mains voltage is the same as the voltage on the rating plate of the device.
  • Do not move the device by pulling the main cable. Make sure that the main cable cannot become entangled.
  • Do not immerse the device, the mains cable or the mains plug in water or other liquids.
  • Do not leave the device unattended while the mains plug is connected to the mains supply.
  • Do not use an extension cable.

Cleaning and maintenance

WARNING

  • Before cleaning or maintenance, always switch off the device, remove the mains plug from the wall socket and wait until the device has cooled down.
  • Do not use cleaning solvents or abrasives.
  • Do not clean the inside of the device.
  • Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
  • Do not immerse the device in water or other liquids.
  • Clean the outside of the device using a soft, damp cloth. Thoroughly dry the device with a clean, dry cloth.
  • Clean the ventilation openings using a soft brush.

Support
If you need further help or have comments or suggestions, please visit www.nedis.com/support

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands service@nedis.com

SCANNER

ned.is/ltout05bk

FAQ

  • Q: How do I switch between different light modes?
    • A: Press the on/off button while the lamp is on to switch between warm, neutral, or cool white light modes.
  • Q: How do I know when the lamp is fully charged?
    • A: The lamp is fully charged when the charging indicator light turns green.
  • Q: Can I use the lamp while it is charging?
    • A: Yes, you can use the lamp while it is charging for added convenience.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals