nedis LWORR10RD Rechargeable COB LED work light User Guide
- June 15, 2024
- nedis
Table of Contents
nedis LWORR10RD Rechargeable COB LED work light
Product Information
Specifications
- Product Name: Rechargeable COB LED Work Light
- Model: LWORR10RD
- Output: 5V/0.5A
- Intended Use: Indoor and outdoor work light, portable power bank
- Features: Built-in rechargeable battery, USB-C charging port, USB-A output, Mounting magnet, Kickstand
Safety Instructions
WARNING: Do not look directly into the light to avoid eye damage.
- Charge the battery for at least 3 hours before first use.
- Plug the USB-C connector of the charging cable into a 5V/1A power source.
FAQ
- Q: Can this product be used for professional applications?
- A: No, this product is not intended for professional use.
- Q: How long does the battery need to be charged for the first time?
- A: The battery should be charged for at least 3 hours before first use.
- Q: What should I do if the charging indicator does not light up?
- A: Ensure that the USB-C connector is properly plugged into a 5V/1A power source.
Rechargeable COB LED work light
For more information see the extended manual online: ned.is/lworr10rd
Intended use
- This product is a work light with a built-in rechargeable battery.
- This product can also be used as a portable power bank with a 5V/0.5A output.
- This product is intended for indoor and outdoor use.
- Any modification of the product may have consequences for safety, warranty, and proper functioning.
- This product is intended to be used in households and similar applications such as kitchen areas.
- This product is not intended for professional use.
Main parts
- LED light
- USB-C charging port
- USB-A output
- Mounting magnet
- USB-A connector
- Power button
- Charging indicator LEDs
- Kickstand
- USB-C connector
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Retain the original product literature for future reference.
- Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
- Do not drop the product and avoid bumping.
- Do not expose the product to water, rain, moisture, or high humidity.
- Only use the provided USB charging cable.
- Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
- The product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before first use.
- Do not short-circuit a cell or a battery.
- Do not use aggressive chemical cleaning agents when cleaning the product.
- Do not open the product, there are no user-serviceable parts inside.
- The light source of this product is not replaceable. Replace the product when the light source reaches its end of life.
- Avoid direct eye exposure to the LED light diodes.
Charging the product
Charge the battery for at least 3 hours before using the product for the first time.
- Plug the USB-C connector of the USB charging cable A9 into the USB-C charging port A2.
- Plug the other end of the USB – USB-C charging cable A5 into a 5V/1A power source.
Using the product
Do not look directly into the light, this may cause eye damage.
-
Press the power button A6 to switch on the product.
-
Press the power button A6 to cycle through the available light modes.
There are five light modes:- Brightness 3
- Brightness 2
- Brightness 1
- Red SOS light
- Red strobe light
-
Hold the product by hand or use one of the other options:
- Mount the product on a ferrous surface (image B )
- Place the product on the kickstand (image C )
Charging your device
- Press the power button A6.
- Insert the charging cable of your device (not included) into the USB-A output.
- Connect the other end of the cable to the charging port of your device.
Disposal
- The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
- For more information, contact the retailer or the local authority responsible for the waste management.
CONTACT
Nedis BV
- De Tweeling 28, 5215 MC ’s-Hertogenbosch
- The Netherlands
- service@nedis.com
Nedis Limited
- Prebend House, 72 London Rd, Leicester LE20QR
- United Kingdom
- service@nedis.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>