EUROfase 48098 Wall Mounted Mirror Cerissa Modern Black LED Rectangle Instruction Manual

EUROfase 48098 Wall Mounted Mirror Cerissa Modern Black LED Rectangle

Product Specifications

• Model: CERISSA 48098
• Max Wattage: 61W
• LED: Yes
• Voltage: 120V~
• Frequency: 60Hz

Product Usage Instructions

• Installation:
  • Follow the provided installation manual to securely mount the lighting product in your desired location.
• Power Connection:
  • Ensure the voltage input matches the product specifications before connecting to a power source. Use appropriate wiring and connectors as per local regulations.
• Turning On/Off:
  • Use the designated switch or control mechanism to turn the lighting product on and off. Avoid frequent on/off cycles for longevity.
• Maintenance:
  • Regularly clean the product with a soft, dry cloth to maintain its appearance. Avoid using harsh chemicals or abrasive materials.

Thank You
You’ ‘ve just purchased a lighting product designed and built to provide you with years of enjoyment.

IMPORTANT SAFETY INSTRUCTIONS

• Attention to installer, must test the light fixture before installation.
• When using an electrical furnishing, basic precautions should always be followed, including the following:
• Read all instructions before using (this furnishing).
  • DANGER – To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or servicing.
  • WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
• Unplug from the outlet before putting on or taking off parts.
• Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
• Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
• Never operate this furnishing if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service centre for examination and repair.
• Keep the cord away from heated surfaces.
• Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
• Never drop or insert any object into any opening.
• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
• To disconnect, turn all controls to the off position, then remove the plug from the outlet.
• WARNING: Risk of Injury – Keep children away from this furnishing.
• WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.

GROUNDING INSTRUCTIONS

• For a permanently connected product: This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the product.
• For a grounded, cord-connected product rated max 15 amperes and intended for use on a nominal 120-volt supply circuit :
• This product is for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
• For loading always put heavier items at the bottom and not near the top to help prevent the possibility of the furnishing tipping over.
• WARNING: Risk of Injury to Persons – do not use this furnishing to support video equipment such as televisions or computer monitors.
• Mount furnishings at the correct height.
• This unit is suitable for installation in a damp, indoor location only.
• This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
• Save this instruction for future reference.
  • Estimated Assembly Time: 20 minutes
  • Tools Required For Assembly (not included) : Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
  • Helpful Tools (not included): Wire strippers, Ladder.

HARDWARE INCLUDED

Temporarily secure the paper (G) to the wall, then mark the anchor (D) locations on the wall through the holes. Remove the paper (G) and drill holes making them slightly smaller than the anchors (D) provided.

Temporarily secure the paper (G) to the wall, then mark the anchor (D) locations on the wall through the holes. Remove the paper (G) and drill holes making them slightly smaller than the anchors (D) provided.

OPERATION INSTRUCTIONS

Option 1

• Short touch: ON and OFF

• Press and hold: Dimmable

• Short touch to turn ON and OFF for the defogger function.

• Automatic turn off after 1 hour

Short touch to adjust the colour temperature: 3000K (Warm), 4500K (Neutral), 6400K (Cool).
Press and hold: Stepless CCT.

Option 2

CONTACT

• Customer Service & Tech Support: 905-695-2147
• Email: Info@eurofase.com
• ADDRESS: 33 West Beaver Creek Rd, Richmond Hill, Ontario Canada L4B 1L8

Frequently Asked Questions

• Q: What should I do if the product malfunctions?
  • A: Contact customer service & tech support at 905-695-2147 or via email at Info@eurofase.com for assistance with troubleshooting and resolving any issues.
• Q: Can I use bulbs with wattage higher than 61W?
  • A: It is recommended to adhere to the specified maximum wattage to prevent damage to the product and ensure proper functioning.
• Q: How do I know if the LED is working?
  • A: When powered on, the LED component should emit light. If there is no illumination, check the power connection and consult the user manual for troubleshooting steps.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>