Kinderkraft Neste UP 2 Bedside Crib Co Sleeper Light User Guide

Kinderkraft Neste UP 2 Bedside Crib Co Sleeper Light

Product Information

Specifications

• Product: NESTE UP2 (SR) KREVETAC
• Version: 1.1

Introduction

Dear Customer, thank you for purchasing a Kinderkraft brand product. We create with your child in mind – always caring about safety and quality, ensuring the comfort of the best choice.

Safety Instructions and Precautions

• WARNING!  Do not use this product without reading the instruction manual first.
• Stop using the product as soon as the child is able to sit, kneel, or pull up.
• Adding additional items to the product may cause suffocation.
• Do not place the product close to another product that might pose a risk of suffocation, e.g., pillows or stuffed toys.
• Do not use more than one mattress per product.
• Place the product on a horizontal surface.
• Small children should not play without supervision near the bed.
• The bed should be locked in a fixed position when the baby is left unattended.
• All assembly elements should always be properly tightened.
• Make sure that no screw is loose, as it could be reached by the child or could become entangled in clothing or objects (e.g., laces, necklaces, doll straps), which may pose a risk of suffocation.
• Be aware of the risks associated with smoking cigarettes, keeping open flames, or other sources of heat such as electric heating elements or gas heaters in the vicinity of the crib.

Bed Specifications

• Maximum allowed tilt – 2 levels.
• Do not use the crib if some parts are missing, damaged, or broken. If necessary, contact 4Kraft Sp. for spare parts and instructions. Do not replace parts on your own.
• WARNING!  Use only the mattress sold with this crib, do not place another mattress on the original mattress, as it may pose a risk of suffocation.

Product Usage Instructions

1. Assembly

Follow the assembly instructions provided in the manual to set up the crib.

1. Prepare an appropriate surface to avoid damaging the product during assembly. Place the bed frame with the cover on a flat surface. By holding the bed frame, lift the legs until they separate. Then remove the plastic caps/protectors on the legs and insert the wheels into the legs. Proper installation is characterized by a clicking sound. Turn and place the unfolded main frame with the cover back on a flat surface. Then connect the middle support with the legs of the bed by inserting it into the corresponding holes on both sides and securing it with Velcro straps. Insert the lower bracket into the legs. The assembled product is shown in figure F.
2. To adjust the height of the bed, hold the bed with one foot, simultaneously press buttons A and B, and set the frame to the desired height (illustrated in figure G).
3. To add the bedside crib next to the parent’s bed, unzip the zippers on both sides, slide out the tube from the side panel, and repeat the process on the other side. Remove the side panel from the outer side of the bed and slide out the tube from inside. Adjust the height of the bedside crib to the parent’s bed, and secure the belt clips to the bed. To move the crib closer to the foot of the parent’s bed, slide button A to the side and simultaneously press button B. Simultaneously, move the legs to the selected distance. Thread the straps through the entire bed or just the side rail, and adjust so that the baby’s crib fits well against the parent’s bed. Wind any loose strap parts under the bed. CAUTION! Make sure that the straps are properly adjusted and that the crib fits well against the parent’s mattress.
4. The bed has 4 wheels that facilitate movement and adjustment to the parent’s bed. To lock them, press the lock button downwards. To unlock, move the button upwards (illustrated in figure P).

2. Height Adjustment

The crib has a height adjustment feature in 5 steps. To adjust the height, hold the crib with your foot, simultaneously press button A and B, and set the frame to the desired height.

3. Locking Wheels

The crib comes with 4 wheels for easy movement. To lock them, press the locking button downwards. To unlock, move the button upwards.

4. Maintenance and Cleaning

Clean the frame with a soft, clean, damp cloth. Hand wash only.
Do not tumble dry, bleach, iron, or dry clean. Avoid folding or storing the product when wet, and never store it in damp conditions to prevent mold growth.

5. Warranty

For full warranty terms and conditions, refer to the website WWW.KINDERKRAFT.COM.

FAQs

Can I use the crib without the wheels?

Yes, you can use the crib without attaching the wheels for added stability.

How do I adjust the height of the crib?

To adjust the height, hold the crib with your foot, press buttons A and B simultaneously, and set the frame to the desired level.

What should I do if a part of the crib is missing or damaged?

Contact 4Kraft Sp. for spare parts and instructions. Do not attempt to replace parts on your own.

Can I use a different mattress with the NESTE UP2 crib?

No, you should only use the mattress that is sold with the crib to avoid any risks.

How can I ensure the crib is safely attached to the parent's bed?

Make sure to adjust and secure the straps properly and check that there is no gap between the crib and the parent's mattress.

Is the NESTE UP2 crib easy to move and adjust?

Yes, the crib has 4 wheels with locking mechanisms for easy movement and adjustment.

How do I clean the NESTE UP2 crib?

Clean the frame with a soft, damp cloth and hand wash any fabrics as needed. Avoid using a tumble dryer, bleach, ironing, or dry cleaning.

Customer Support

For the benefit of our customers, we are at your disposal! If you encounter any problem with the product you have received, please contact us in the most convenient way for you!

International Contact

Email: support@kinderkraft.com
Phone: +44 20 4525 0748

Manufacturer:
4Kraft Sp. z o.o.
ul. Tatrzańska 1/5,
60-413 Poznań, Poland

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>