Kinderkraft COMFORT UP i-Size Childrens Car Seat User Guide
- May 15, 2024
- Kinderkraft
Table of Contents
Kinderkraft COMFORT UP i-Size Childrens Car Seat
Introduction
Please carefully familiarize yourself with the operating instructions before the first use of the child car seat. Ensuring the safety of your child is your responsibility, and failure to read these instructions may affect it.
Car Seat Components
- Headrest
- Backrest
- Guide for hip belt
- Detachable inner cushion pads
- Inner belts
- Buckle of inner belts
- Buckle pad
- Adjustment button of inner belts
- Inner belt adjustment strap
- Seat of the car seat
- Lever for headrest height adjustment
- Guide for shoulder belt
- Car seat belt lock
- Inner insert
Specifications
- Model: I-LITE
- Product Name: COMFORT UP i-Size
- Regulation: ECE.R129.03
- Version: 1.0
| Model | Standard Compliance | Version |
|---|---|---|
| COMFORT UP i-Size | ECE R129.03 | v.1.0 |
| Child Height | Orientation of the Car Seat | Car Seat Mounting |
| --- | --- | --- |
| 76cm – 105cm / ≤18kg | Facing the direction of travel | 3-point car belts |
belts
100cm – 150cm| Facing the direction of travel| 3-point car belts| 3-point car
belts
Product Information
The COMFORT UP i-Size car seat is designed and approved according to
regulation ECE R129/03 for enhanced child restraint devices. It is suitable
for children with a height range of 76cm – 105cm and weight up to 18kg. The
car seat can be installed in the vehicle following the manufacturer’s
instructions and using the vehicle’s own safety belts.
Usage Instructions
Elements of the Car Seat:
- Child Height Range: 76cm – 105cm
- Child Weight Range: Up to 18kg
- Orientation: Forward-facing
- Seatbelt: 3-point seatbelts
Application
The car seat has been designed, tested, and approved for use according to the requirements of Regulation No. 129 ECE/UN concerning the approval of enhanced child restraint systems (UN/ECE R129/03).
The COMFORT UP i-Size is intended for children with a height of 76 cm to 150 cm to be mounted facing the direction of travel. In the range of 76 cm to 105 cm and a weight of up to 18 kg, the seat is mounted using a 3-point safety belt. For this range, the child is fastened with the inner belts. In the range of 100 cm to 150 cm, the seat is mounted using a 3-point safety belt. For this range, the child is fastened with a 3-point safety belt.
The seat can be installed in a vehicle at places indicated by the vehicle manufacturer’s instruction manual. It is required to familiarize yourself with the vehicle manufacturer’s instruction manual.
Safety Instructions
WARNINGS: Please spend a few minutes reading these operating instructions
to ensure the necessary safety of your child. Many injuries caused by
accidents can be avoided by careful and proper use of the car seat.
- The seat is designed for installation solely on vehicle seats equipped with seat belts facing the direction of travel. The seat must not be installed on vehicle seats/benches facing the rear or side of the direction of travel (see A.2).
- In the case of installing the seat on the front seat, it is necessary to disable the front airbag.
- Remember that the inner belts holding the child should be adjusted to the child’s body structure and should not be twisted. For this reason, do not put thick clothes on the child under the belt.
- The lap belts of the safety belts must be as low as possible across the child’s hips to ensure optimal effect in case of an accident.
- The seat must be replaced if it has been subjected to significant stress during an accident.
- Without the approval of the appropriate authority granting approval for the car seat, it cannot be modified in any way. Non-compliance with the installation instructions provided by the manufacturer may pose a threat to life and health.
- The child car seat should be protected from direct sunlight; otherwise, the heated elements can burn your child. Protect your child and the car seat from sunlight.
Usage of Insert:
An insert can be used for added comfort and support for smaller children
until they outgrow it. Remove the insert when the child needs more space in
the car seat.
Using the Car Seat:
Adjust the car seat according to the child’s height. Ensure the safety
straps are at the correct height and properly positioned over the child’s
shoulders.
Installing in Vehicle:
Install the car seat in a forward-facing position using the vehicle’s
3-point seatbelts. Make sure all straps are securely fastened and that the car
seat is correctly positioned.
Installation and Adjustment
- Loosen the inner belts by pressing the red button on the buckle (6).
- Place the inner insert (14) in the seat so that it is flush with the sides.
- Adjust the position of the inner belts. Make sure the inner belts are not twisted.
- With the help of the strap, place the upper part of the inner insert on the headrest.
Securing the Child with Inner Belts
- Loosen the inner belts by pressing the button (8) and pull the restraint straps (see C.4).
- Unfasten the buckle (6) and place the restraint straps on the sides of the seat (see B.5, B.8). Place the child in the seat (see B.6).
- Adjust the headrest to the child’s height (see section 5.1).
- Share the crotch straps to secure it and put it into the buckle until you hear a “click” (see B.7).
Tightening of Inner Belts
- Pull the shoulder straps to eliminate slack in the hip section, so the inner belts lie flat.
- Tighten the restraint straps with the adjustment strap (8) so that they lie flat on the child’s body and close to it (see C.8).
- NOTE: The inner belts of the hip section must be positioned as low as possible on the hips of the child. Pay attention that the inner belts are not twisted (see C.9).
Installation in Vehicle
For installation facing the direction of travel, for children with a height
in the range of 100 to 150 cm using safety belts, refer to sections 6.1 and
6.2 for detailed instructions, including securing inner belts and ensuring
proper fit and tension.
Maintenance Instructions
Removing the cover involves several steps, such as removing the insert if
used (see section 4.1), disassembling the inner belts if used (see section
6.2.1), and more, as outlined in section 7.1. Note that frequent removal is
not recommended.
Cleaning
All important parts of the seat should be regularly checked. Mechanical parts must function flawlessly. Use only the original cover, as it is an essential element of the safety of the seat. NOTE: Do not use the seat without a cover. The cover should be washed only by hand with neutral detergents or warm water. Do not spin-dry or dry in a tumble dryer. You should extract the foam located in the cover on the backrest of the seat. Plastic elements can be cleaned with water or soapy water. Do not use aggressive cleaning agents (like solvents). Inner belts can be cleaned in lukewarm water with soap. Caution! Never remove the metal buckles from the belts.
Contact Information
International contact: support@kinderkraft.com | +44 20 4525 0748
For any concerns or issues with your product, reach out to Kinderkraft using the contact information provided.
- YouTube: kinderkraftofficial
- Facebook: kinderkraft
- Instagram: kinderkraftofficial
FAQ
Can the car seat be used for newborns?
The car seat is suitable for children within the height range of 76cm - 105cm and weight up to 18kg, so it may not be ideal for newborns. It is recommended to consult with a pediatrician for newborn car seat options.
How often should I check the installation of the car seat?
It is advised to regularly check the installation of the car seat, especially after any adjustments to the child's position or growth, to ensure maximum safety.
How do I properly adjust the inner belts?
Make sure the inner belts are not twisted, adjust the headrest to the child's height, and ensure that the inner belts lie flat and are positioned as low as possible on the child's hips.
Can the car seat be modified?
No, without the approval of the appropriate authority, the car seat cannot be modified in any way.
What should I do if the car seat has been in an accident?
The seat must be replaced if it has been subjected to significant stress during an accident.
How often should the car seat be cleaned?
Important parts should be regularly checked, and cleaning should be done as needed, using only neutral detergents or warm water.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>