Kinderkraft JULI 3-in-1 Stroller User Manual

: June 5, 2024
: Kinderkraft

Kinderkraft JULI 3-in-1 Stroller User Manual

Dear Customers,

Thank you for purchasing a Kinderkraft product. Our products have been designed for your child’s safety and comfort. The buggy is an ideal solution for those who value quality, modernity and functionality. The product meets the requirements of safety standard EN 1888:2012. Please read the manual carefully and follow its recommendations.
IMPORTANT- keep these instructions for future use.

WARNING!

Never leave the child unattended.
Ensure that all the locking devices are engaged before use.
To avoid injury ensure that the child is kept away when unfolding and folding this product.
Do not let the child play with this product.
Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use
This product is not suitable for running or skating
The product is designed to transport one child at a time. The maximum basket load is 2 kg. Any additional load suspended from the buggy handles, under the backrest or on the sides will cause stability deterioration. Maximum weight of a bag attached to the adjustable handle is 2,5 kg. Lift the front suspension when going up a curb or step.
The brakes should be locked when the child is placed in or taken out of the buggy.
Use only parts and accessories supplied or recommended by the manufacturer. Do not use other parts or accessories.
Do not place the product near open flame or other heat sources.
Do not use with an additional platform.

The following applies to the bassinet:

WARNING! This product is suitable for a child who cannot sit up unaided, roll over and cannot push itself up on its hands and knees. Maximum weight of the child: 9 kg
The bassinet must not be used as a child carrier. The bassinet handle is only designed for assembly and disassembly on the buggy frame.
Don’t insert an extra mattress. The bassinet/seat comes with an integrated mattress.

The following applies to the buggy:

WARNING!
This seat unit is not suitable for children under 6 months. Always use the restraint system.
The product is intended for children from 6 months old to 15 kg.

Applies to Kinderkraft car seat:

Kinderkraft JULI is available also in a set with a compatible Kinderkraft car seat.
The product is intended for children from birth to 13 kg.
If the seat is used together with the buggy, it does not replace a cradle or crib.
For sleep, place the child in the bassinet, cradle or crib.

I Buggy components

A. Frame
B. Front wheels x2
C. Rear wheels x2
D. A set of wheel fasteners
1. Pin x2
2. Cap x2
3. Plug x2
E. Rear axle with brake
F. Safety bar
G. Seat/bassinet 2 in 1
H. Bar under the bassinet/seat
I. Hood
J. Safety harness {factory-installed in the bassinet/seat)
K. Footmuff
L. Car seat adapters {left and right)
M. Rain cover
N. Cup holder

II UNFOLDING BUGGY FRAME

Place the frame {A) on a flat surface. Unlock the lock on the right side of the buggy {FIG. 1). Grasp the handle and lift the frame up until you hear a sound, which indicates that the frame is properly secured {FIG. 2). To mount the rear axle with the brake {E), put the rear free tips of the frame in the slots in the rear axle {FIG. 3) until you hear the lock click. Make sure to properly protect them with snap fasteners {FIG. 4).
WARNING! After setting the frame in its natural position, the brake lever should be on the side of the parent handle (FIG. 3.

Ill WHEEL ASSEMBLY /DISASSEMBLY

Put the rear wheel {C} on the protruding part of the rear axle {E). Press the plastic pin on the axle {D1), secure with the plastic cap {D2) and cover the tip with a pin {D3}.
Each of the elements should be pressed with a slight resistance, until it locks {FIG. 5 & 6). Repeat these steps on the other side of the buggy.

WARNING! When installed, the rear wheels cannot be removed.
In the case of exceptional necessity, it is possible to dismantle the whole rear axle and wheels with brake after unlocking the clips shown in Figure 4.

Insert the front wheels {B) into the slots in the front of the frame, until you hear the lock click {FIG. 7A).
The buggy has a system of swivel front wheels which can be locked in the straightahead position. To set the wheel in the straight-ahead position, move the locking lever to the outside {FIG. 8). To unlock the wheel, move the lock lever to the inside.
To remove the front wheel, press the button shown in Figure 9 and pull the wheel out.

WARNING! Before using the buggy, make sure that all the wheels are properly installed.

IV USE OF BRAKE

The buggy is equipped with a foot brake located on the rear axle. Press the brake pedal to activate it. The brake is released after the pedal is lifted up (FIG. 9).

V ASSEMBLY/DISASSEMBLY OF BASSINET AND SAFETY BAR

Place the bassinet (G) on a flat surface. Put the bar (H) in the slots on the bassinet frame as shown in Figure 11. After mounting, the bar (H) should be bent as shown in
Figure 12. Then secure the position of the bar (H) with the snap fasteners (FIG. 13). In the case of a buggy with a car seat, the bassinet is separated for the time of travel.
To install the bassinet, attach the bassinet tube, and then fasten the zip (in reverse order compared to FIGS. 39 and 41).
When installing the bassinet on the buggy frame, put them in the slots (FIG. 14) designed for this purpose on each side of the buggy frame until you hear clicking sound

WARNING! THE BASSINET CAN ONLY BE MOUNTED FACING BACKWARDS (the child faces the person pushing the buggy).
WARNING! A brand new buggy comes with a safety harness inside the bassinet. The safety harness must be removed to be able to safely use the buggy in the bassinet version. The method of removing the harness is described in section VIII.
Insert the safety bar (Fl into the special slots in the bassinet/seat frame (one on each side), until you hear the clicking sound (FIG. 15).

VI INSTALLATION OF THE FOOTMUFF, HOOD, CUP HOLDER AND RAIN COVER

Start the installation of the hood {I) from inserting plastic clips in the fastenings in the bassinet/seat frame (FIG. 16). Proper protection is indicated by a quiet click. Lastly, secure the hood with a zip fastener around the bassinet/seat (FIG. 17). Place the footmuff (Kl by pulling it on the bassinet/seat and fasten the sides with snap fasteners (FIG 18). Wrap the upper part of the cover around the safety bar and
fasten with buttons (FIG. 19) or attach buttons to the loops on the hood (FIG. 20). Attach the cup holder (N) on the left side of the buggy (FIG. 21).
In addition, the buggy can be protected with rain cover (M). Installation example is shown in Figure 22.

VII CONVERTING THE BASSINET INTO THE SEAT

To convert the bassinet into the pushchair, remove the bassinet from the frame by pressing the buttons on the sides (FIG. 23) and fasten together the two buckles under the seat (FIG. 24). Mount the seat back on the frame and pull the belts behind the backrest to tilt the backrest (FIG. 25). Adjust the position of the seat by means of a lever which is located at the top of the backrest (FIG. 26).
The seat has three positions: lying, reclining and sitting. The seat can be mounted forward or rearward facing.

VIII SAFETY HARNESS

Press the buckle to unfasten the belt (FIG. 27). In addition, the shoulder belts can be detached from the lap belt.
To secure the child, connect the fasteners of the lap and shoulder belts (if they were detached) and then insert them into the middle clamp (FIG. 28) until it engages. Adjust the safety harness each time to properly secure the child.

WARNING! A brand new buggy comes with a safety harness inside the bassinet. The safety harness must be removed to be able to safely use the buggy in the bassinet version.
Removing the harness: Take shoulder and lap belts out of the openings by pushing plastic tabs inside the bassinet/seat (FIG. 29 & 30). Installation proceeds in the opposite way. After completing the assembly, make sure that the plastic tabs firmly secure the belts.

IX ASSEMBLING THE CAR SEAT ON THE BUGGY FRAME

The supplied adapters (L) are compatible with the following car seats: Kinderkraft,
Maxi Cosi®, Cybex® and are suitable for models: Kinderkraft MINK, Cybex Aton, Aton 2, Aton Q i Maxi Cosi Mico, Mico AP, Mico NXT, Mico Max 30, Citi, Cabrio, and CabrioFix.
Place adapters in the openings on both sides of the frame until you hear the lock click (FIG. 31). The adapters should be tilted slightly toward the parent pushing the buggy.
When installing the car seat on the buggy frame, insert the adapters in the slots on each side of the seat, in accordance with the seat user manual. Example for KinderKraft MINK is shown in Figure 32. To remove the seat with adapters from the frame, press the buttons in the adapters on both sides of the buggy (FIG. 33) and pull the seat up.

WARNING! Do not disassemble the buggy without removing the

bassinet/seat/car seat first.

For cleaning, the bassinet/seat cover can be removed. First, pull the belts out (Section VIII) and remove the hood and the footmuff. Then open the zip fastener around a portion of the frame (FIG. 39). Release the snap fasteners holding the bar under the bassinet/seat (FIG. 40). Disconnect the second part of the frame by releasing the snap fasteners on the sides and pulling the tube out (FIG. 41). Then slide the cover down the tube (FIG. 42). At the end, detach the Velcros on the underside of the cover and pull the back and seat supports (FIG. 43). The footrest support is made of a material resistant to moisture. Installation of the cover takes place in reverse order. During installation of the cover make sure that the groove in the detachable tube is at the top of the bassinet/seat.

XII CARE AND MAINTENANCE

The buyer is responsible for proper installation of all functional elements as well as for carrying out all required maintenance and adjustments in order to keep the buggy in good technical condition.
The buggy must be periodically checked for potential problems. Significant measures to be applied to ensure the child’s safety and prevent shortening of the product life have been presented below:

Check the strength and safety of all rivets and connections.
Check all wheel locking equipment and tyres. If necessary, replace or repair.
Check if all safety devices work properly, particularly the main and additional fasteners that should move freely at any time.

Please, stop using the buggy if there are doubts as to its proper use or a suspicion of any danger.
If the wheels squeak, apply a thin layer of silicone. Do not use oil or grease based products as they attract dirt, which makes buggy movement difficult.