Kinderkraft 2 I-SIZE Safety Fix Comfort Messenger User Guide
- June 1, 2024
- Kinderkraft
Table of Contents
Kinderkraft 2 I-SIZE Safety Fix Comfort Messenger
MODEL: COMFORT UP i-Size ECE R129.03 v.1.0
Specifications
- Model: COMFORT UP i-Size ECE R129.03 v.1.0
- Height of Child: 76cm – 105cm / 18kg
- Positioning of the Seat: Forward-facing
- Vehicle Seat Belt Type: 3-point safety belts
Product Information
The COMFORT UP i-Size car seat is designed to provide optimal safety and comfort for children within the specified height and weight range.
Usage Instructions:
Intended Use:
The car seat is intended for children between 76cm and 105cm in height,
weighing up to 18kg, and should be installed in a forward-facing position
using the vehicle’s 3-point safety belts.
Safety Instructions:
- Always read the user manual to ensure the child’s safety.
- Place the car seat only on the rear seats of the vehicle.
- Avoid bulky clothing under the seat belts.
- Protect the child and the car seat from sunlight.
- Ensure all vehicle mechanical parts are functioning correctly.
Using the Insert:
It is recommended to use both the upper and lower parts of the insert as a
headrest until they are removed.
Adjusting Headrest and Safety Belts:
Position the car seat on the vehicle seat, place the child in the seat, and adjust the headrest height. Repeat until optimal height is achieved.
Buckling Up with Integrated Belts:
Secure the child in the seat using the integrated harness system ensuring a
characteristic click sound for proper engagement.
Adjusting Integrated Belts:
Adjust the integrated belts to fit snugly around the child’s hips. Ensure
the belts are not twisted.
Vehicle Installation:
Ensure that all passengers are securely belted in case of emergency braking or an accident. Follow proper installation guidelines provided in the user manual.
Important Safety Instructions
It is crucial to read the manual thoroughly to ensure child safety. Many
preventable injuries occur due to careless and improper use of the car seat.
Proper Use Guidelines
The car seat is designed, tested, and approved for use in compliance with
the requirements of Regulation No. 129 UN/ECE regarding the homologation of
advanced child restraint systems. It is intended for children with a height of
76 cm to 150 cm when installed in the vehicle facing the direction of travel.
Contact and Manufacturer Information
In case of any issues or concerns with the product, customers are encouraged to contact Kinderkraft for support.
International contact:support@kinderkraft.com
+44 20 4525 0748
Manufacturer:
4Kraft Sp. z o.o.
ul. Tatrzańska 1/5
60-413 Poznań, Poland
FAQ
Can this car seat be used for rear-facing installation?
No, this car seat is designed for forward-facing installation only.
How often should I check if the car seat is properly secured in the vehicle?
It is recommended to check the installation of the car seat regularly, especially after any adjustments or changes in the vehicle's seating configuration.
How should the car seat be positioned?
The car seat should be positioned in the direction of travel. For children between 76cm - 105cm or under 18kg, use the vehicle's 3-point safety belts. For children between 100cm - 150cm, the integrated belts should be used.
What are the safety instructions for using the car seat?
Ensure the car seat is only mounted on seats facing forward in the direction of travel. Make sure integrated belts are properly adjusted to the child's body and not twisted. Avoid bulky clothing under the belts.
How do I clean the car seat?
The cover can be washed exclusively with warm water and neutral detergents. Do not centrifuge or dry in a dryer. Remove the foam present in the backrest lining. Plastic components can be washed with diluted soap water, avoiding aggressive agents like solvents. Integrated belts can be washed in warm soapy water but do not remove the press studs from the belts.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>