Kinderkraft 4TRIKE 3in1 Tricycle User Guide
- June 1, 2024
- Kinderkraft
Table of Contents
4TRIKE
USER GUIDE
4TRIKE 3in1 Tricycle
https://www.youtube.com/watch?v=iCxhfJTh4HM&list=PLR7FAXb1vT1b6opt43p4_rgttbxjB_q29&index=76
The illustrations are for illustration only and do not represent the
product.
Dear customer
Thank you for purchasing a Kinderkraft product.
We design our bicycles with your child in mind – we always care about safety
and quality, which guarantees that with the purchase of our products you get
the comfort of the best possible choice.
IMPORTANT! IT IS IMPORTANT TO KEEP THIS MANUAL FOR FUTURE USE
SAFETY INSTRUCTIONS AND PRECAUTIONS
Attention:
- Compliance with the user manual ensures safe use of the toy. Read the user manual carefully before using the bike and keep it for future use. Recommended for children from the age of 12 months.
- Use personal protective equipment such as helmets, gloves, elbow pads and knee pads. This product is intended for outdoor use. Do not use in road traffic. The kids cruiser bike should not be used near motor vehicles, streets, swimming pools, hills, roads, stairs or on uneven ground.
- Use the toy on flat, obstacle-free surfaces.
- To avoid serious injuries, continuous adult supervision is necessary.
- To avoid falls and collisions causing injury to the user or others, parents/guardians should draw children’s attention to the safety precautions to be taken. Before using the product, it is important to explain to children how to use it safely.
- The person using the product must always wear shoes.
- Assembly must always be carried out by an adult. Before each use, check that the item is not damaged or worn and that all assembly and fastening parts are in good condition. Ensure that the bolts and nuts retain their auto-locking properties. Check that the assembly is complete and in good condition. If you notice that some parts are missing or damaged, do not use the product, but contact your retailer. Small items must be kept out of the reach of children.
- Be careful when riding bicycles, you should know how to ride to avoid falls or collisions that could cause injury to the user or a third person.
- The safest areas for the persons using the bicycle are those with little or no vehicular traffic, such as private areas, playgrounds, schoolyards, and school playgrounds.
- Maximum user weight − 25 kg
- Keep the packaging or dispose of it in accordance with local regulations.
- For the safety of children, do not leave parts of the packaging freely accessible (plastic bags, cardboard boxes, etc.). Risk of suffocation!
- Do not carry the bike by the metal connector
Bike components
- Frame with wheels and steering wheel mounted
- Seat with pedals
- Additional seat tube
- Mounting spanner
- Metal connector
Mounting the bike
Start mounting the bike by inserting the seat (2.) in the frame (1.). Slide
the tube into the hole as shown in Figure A. Once correctly installed, you
will hear a characteristic click. Then grip the front fork and lift it up.
With the fork up, press the button on both sides of the frame (Fig. B). The
frame will lock. To unfold the steering wheel, press the buttons at the same
time (Fig. C.I) and lift it up until it locks. The bike can have one of three
functions: a tricycle, a tricycle with pedals and a balance bike. To transform
it into a tricycle, press the upper and lower buttons (Fig. D.I), and unfold
the frame as much as possible, with setting the rear wheels in the position
marked with number 3 (Fig. D.II). It is possible to install pedals for older
children (Fig. E). Remove the pedals by pressing the buttons (Fig. F.I)
underneath the seat, hold the lock open and place the pedals on both sides of
the front wheel (Fig.F.II). Once properly positioned, the pedals will lock.
The pedals can be locked in two positions. The first position makes it
impossible to drive the bike with pedals and is undesirable (Fig.G.I) while
the second position is correct (Fig.G.II). Leave the rear wheels in the
position marked with number 3. To transform the bike from a tricycle to a
balance bike (Fig.H), start by moving the wheels to the position marked with
number 1 by pressing the button (Fig.I.I). Then use the buttons (Fig.I.II) to
fold the rear axle until the rear wheels are folded. Remove the metal
connector (5.) (Fig.I.III) from underneath the frame by pulling, and insert it
into the holes on the rear axle (Fig.I.IV). If the pedals are mounted, remove
them from the front wheel by pressing the button (Fig.I.V) and place them back
under the seat (Fig.I.VI). It is possible to change the seat tube (3.) to a
longer one; to do so, unscrew the screw that holds the seat tube with the
mounting spanner (4.) and pull the tube out of the hole. Then insert the
longer tube so that the holes in the tube and seat overlap. Tighten the screw
with the mounting spanner. NOTE: The bike can be used in two rear wheel
alignment configurations. Position 1 – balance bike (Fig. J.I), Position 3 –
tricycle (Fig. J.II). Do not use the bike in position 2. Position 2 is used to
adjust the wheels during storage and transport (Fig. J.III).
Maintenance and Cleaning
Wash with soft, clean and damp cloth and mild soap.
Storage
Store the product out of reach of children.
Warranty
The full text of the Terms and Conditions of the Warranty is available on the
website WWW.KINDERKRAFT.COM
In the interests of our Clients – we are at your disposal! If you have a
problem with the product you received, contact us in the most convenient way
for you!
International: support@kinderkraft.com
(0048) 61646 02 37
kinderkraft.com
HERSTELLER
4Kraft Sp. z 0.0. ul. Poland
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>