Kinderkraft Strollers Car Seats Bikes for Children User Manual
- June 5, 2024
- Kinderkraft
Table of Contents
Watch manual
VIDEO!
youtube.com/kinderkraftofficial
kinderkraft.com
Dear Customers,
Thank you for purchasing a Kinderkraft product Our products have been designed
for your child’s safety and comfort. The buggy is an ideal solution for those
who value quality, modernity, and functionality. Please read the manual
carefully and follow its recommendations.
IMPORTANT – keep these instructions for future reference.
WARNING!
- Never leave your child unattended.
- Ensure that all the locking devices are engaged before use.
- To avoid injury ensure that your child is kept away when unfolding and folding this product.
- Do not let your child play with this product.
- Check that the seat unit attachment devices are correctly engaged before use.
- Always use the restraint system.
- This product is not suitable for running or skating Age and weight usage: from 0 months up to 15 kg.
- We recommend using the lowest reclined position for newborn babies.
- This product may only be used by one child at the same time The parking device shall be engaged when placing and removing the children The maximum basket load is 3 kg. Any additional load suspended from the buggy handles, backrest and sides will cause stability loss. We do not recommend hanging any bags on the parent handle. Use only parts and accessories supplied or recommended by the manufacturer. Do not use other parts or accessories.
- Lift the front suspension when going up a curb or step.
- Do not place the product near open flame or other heat sources. Do not use it with an additional platform.
BUGGY COMPONENTS (FIG. 1)
A. Frame with mounted seat, safety harness, canopy, and wheels
B. Safety bar
C. Rain cover
UNFOLDING BUGGY FRAME
Place the frame on a flat surface with its handle up. In order to unfold the frame, first, unlock the lock on the left side of the buggy frame, and unfold the frame to the angle of approx. 45″, and then lift the parent handle until it clicks. Finally, unfold the frame with a brisk movement until you hear the locking sound (FIG. 2).
ASSEMBLY/DISASSEMBLY OF THE SAFETY BAR AND RAIN COVER
The safety bar must be inserted in appropriate slots on both sides of the frame, as shown in FIG. 3k To remove the bar, press the buttons on both sides and remove the bar (FIG. 3B). Installation of the rain cover – FIG. 4. IV. USE OF BRAKE The buggy is equipped with a foot brake located on the right wheel. Press the lever, and the brake is activated when you hear the locking sound (FIG. 5). Unlocking occurs after lifting the brake lever.
BUGGY ADJUSTMENT
(FIG. 6) The seat is equipped with a smooth backrest adjustment system, from a lying to a sitting position, using a clasp. Hold the free end of the strap and then, without pressing the button on the clasp, pull it up (FIG. 6A). To lower the backrest, press the button on the clasp and slide it towards the end of the belt (FIG. 68).
FRONT WHEELS LOCK
Front wheels in the buggy can be blocked in the forward movement position. This mode is activated by moving the lock sliders up. To unlock the front wheels, move the sliders down (FIG. 7).
SAFETY HARNESS
The buggy’s harness is adapted in such a way to enable its use even by newborns. Always use the fastening system. To secure the child, connect the latches of the lap and shoulder straps and then insert them into the central buckle until it engages (FIG. 8). Adjust the straps each time. The straps can be adjusted using the plastic clasps located under the shoulder pads. The shoulder pads are attached to the straps with press studs. The metal clasps under the fabric allow you to disconnect the shoulder straps from the backrest (FIG. 9) in order to clean them.
FOLDING AND TRANSPORT OF THE BUGGY
In order to fold the frame, pull the locking lever on the right side of the frame (FIG. 10A), and then press the lock button on the handle (FIG. 10B). Next, follow the arrows (FIG. 10C). The final step is to secure the folded buggy using the lock (FIG. 11).
CARE AND MAINTENANCE
The buyer is responsible for the proper installation of all functional elements as well as for carrying out all required maintenance and adjustments in order to keep the buggy in good technical condition. The buggy must be periodically checked for potential problems. Significant measures to be applied to ensure the child’s safety and prevent the shortening of the product’s life have been presented below:
- Check the strength and safety of all rivets and connections.
- Check all-wheel locking equipment and tires. If necessary, replace or repair.
- Check if all safety devices work properly, particularly the main and additional fasteners that should move freely at any time. If the wheels squeak, apply a thin layer of silicone.
Do not use oil or grease-based products as they attract dirt, which makes buggy movement difficult.
CLEANING
In order to remove the coating for cleaning unfasten the coating from the metal fa tening located at the upper part of the backrest (Step 1), then slide the straps on both sides of the frame from the plastic fastenings (Step 2) and release the strap from the latch supporting the lower part of the backrest (Step 3). Finally slide the cover from the footrest and then from the backrest (FIG. 12).
| Wash at max.30c, gentle process
---|---
| Do not bleach
| Do not dry in a tumble dryer
| Do not iron
| Do not dry clean
Other elements (e.g. canopy, basket) with a damp cloth and mild detergent.
| Do not wash. Clean the product gently with a damp cloth and a mild
detergent.
---|---
| Do not bleach
| Do not dry in a tumble dryer
| Do not iron
| Do not dry clean
Do not fold or store the product when it is wet and never store it in wet conditions, as it can lead to mold growth.
Warranty
-
All Kinderkraft products are covered by a 24-month warranty, The warranty period begins on the date of releasing the product to the Buyer.
-
The warranty is valid for products sold in the following countries: France, Spain, Germany, Poland, the United Kingdom Italy.
-
In countries not listed above warranty terms and conditions are determined by the Seller.
-
It is possible to extend the warranty period to 120 months (10 years).
Full text of the terms and conditions and warranty extension registration form is available at www.kinderkraft.com -
The warranty is valid only in the country where the purchase was made.
-
Complaints should be submitted by completing the form available t WWW.RMAKINDERXRAFT.COM
-
The warranty shall not cover;
a. claims arising from product specifications, as long as they comply with those specified by the manufacturer in the instruction manual or other documents of a legislative nature;
b. product damage caused by improper maintenance or use of inadequate chemicals;
c. color change (discoloration) when the product has been exposed to direct sunlight against the instructions provided in the instruction manual;
d. tear, wear, crack of fabric/plastic that is the fault of the Customer;
e. reduction in the quality of the product and consumables due to normal wear and tear; f. products that have not been used according to specifications; -
The warranty period for accessories attached to the device is 6 months from the date of sale, with the exception of mechanical damage.
-
These guarantee terms and conditions are complementary to the Customer’s rights in relation to 4KRAFT sp. z o.o. The warranty shall not exclude, limit or suspend the rights of the Customer arising from the provisions on the warranty for defects in the goods sold.
-
Full text of Warranty Terms and Conditions is available at WWW.NDERKRAFT.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>