Kinderkraft NUBI2 Stroller User Manual

Kinderkraft NUBI2 Stroller

Thank you for purchasing a Kinderkraft product. Our products are designed for the safety and comfort of your child. Buggy is the ideal solution for those who value quality, modernity and functionality. Read the manual carefully and follow its recommendations

IMPORTANT

READ CAREFULLY AND SAVE FOR FUTURE GUIDELINES

WARNING

• Never leave a child unattended.
• Make sure all locking devices are engaged before use.
• To avoid injury, keep the child away when unfolding and assembling this product.
• Do not allow children to play with this product.
• Always use a safety system.
• Check that the body of the stroller or seats or car seat anchorages are properly secured before use.
• This product is not suitable for running or skating.
• Use of age and weight: from 0 months to 22 kg or 4 years, whichever comes first.
• We recommend using the lowest lying position for newborns.
• This product may only be used by one child at a time
• The parking device should be activated when placing and removing children
• The maximum load of the basket is 3 kg.
• The maximum load carried in the cup holder must never exceed 0.5 kg
• The maximum load of the pockets for small items on the rear side of the canopy is 0.5 kg
• Do not hang the bags on the parent’s handle.
• Any additional load, which hangs on the handles of the stroller and/or behind the backrest and/or on the sides of the stroller, causes its stability to deteriorate.
• Use only parts and accessories supplied or recommended by the manufacturer. Do not use other parts or accessories.
• Raise the front suspension when climbing a curb or step.
• Do not place the product near open flames or other heat sources.
• Do not use with an additional platform.
• Stop using the pushchair if you have any doubts about its use or if you suspect any danger

ELEMENTS OF THE CART

1. Awning
2. Seat with safety belt (3)
3. Bumper
4. Footrest
5. Bumper
6. Front wheels
7. Parental handle
8. Cushions
9. Rear wheels
10. Lock button
11. Lever for adjusting the backrest
12. Sopping bag
13. Brake
14. Darzac
15. Mosquito net
16. Fold button

ASSEMBLY OF THE TROLLEY FRAME

Place the frame on a flat surface with the handle facing up (PIC. A). To unfold the pushchair, start by pressing the parent handle onto the pushchair frame so that all the elements fit tightly together, then press the lock button located on the handle (PIC. B.I) while pressing the fold button (PIC. B .II) and lift the frame according to the arrows in the picture (PIC. C), until you hear the locking sound (PIC. D). Push the rear wheels (10) into the slots provided until you hear a locking sound (PIC. E). Push the front wheels (7) into the provided slots until you hear a locking sound (Fig. F).

ASSEMBLY / DISASSEMBLY OF BUMPERS, ADJUSTMENT OF AWNINGS, CUP HOLDERS,

MOSQUITO NETTING

Insert the bumper bar into the corresponding hole in the frame (PIC. G). To disassemble, press the buttons and remove the bumper (Fig. H). To adjust the awning and unfold the second layer of fabric, unzip the awning. It is possible to attach the fabric layer of the stroller located on the backrest. To do this, put the loop on the clip located on the awning. The cup holder (15) can be attached to the right or left side of the cart on its holder (PIC. I). The mosquito net is hidden in the footrest, unzip under the footrest, place and secure by threading the buttons through the loops (PIC.J).

USING THE BRAKE

The cart is equipped with a foot parking brake located on the rear axle. Press the lower part of the brake, the brake will be activated after you hear the locking sound (PIC. K). To unlock, lift the lower part of the brake upwards (Fig. L).

ADJUSTMENT OF THE BACKREST, FOOTREST

The seat has a smooth adjustment from lying to sitting position (PIC. M), by means of a buckle (PIC. N). The footrest has 2 levels of adjustment. Pull the levers located on the bottom of the footrest (PIC. O) to change its position (PIC. P).

SEAT BELT

Stroller seat belts are suitable for newborns. Make sure you always use the fastening system. To secure the child, first place the buckle part of the shoulder strap on the buckle part of the belt and push them into the central buckle until it locks (PIC. K. I). Press the buckle to release the belt (PIC. K.II). Adjust the straps each time.

ASSEMBLING THE CART

Hold the handle and press the lock button (PIC. R.I) and fold button (PIC. R.II) and simultaneously press down (PIC. S). After folding, the trolley locks automatically, as shown in (PIC. T).

CARE AND MAINTENANCE

The customer is responsible for the proper installation of all functional elements as well as for performing all necessary maintenance and adjustments to keep the cart in good technical condition. Buggy must be checked periodically for potential problems. Below are important measures that should be implemented to ensure the safety of the child and prevent the shortening of the product’s lifespan

• Check the strength and security of all rivets and joints.
• Check all wheel and tire locking equipment. If necessary, replace or repair.
• Check that all safety devices are working properly, especially the main and secondary fasteners which should move freely at all times.

If the movement of the wheelchair is difficult. if the wheels squeak, apply a thin layer of silicone. Do not use oil or grease based products as they attract dirt

CLEANING

• Wash at a maximum of 30 degrees
• Do not bleach
• Do not tumble dry in a tumble dryer
• Do not wash, clean the product with a damp cloth wipes and detergent.
• Do not iron
• No dry cleaning

If the trolley chassis elements have been exposed to salt water, rinse with tap water as soon as possible. Basket, seat canopy, seat lining: Do not wash. Gently clean the product with a damp cloth and mild detergent, do not bleach, do not iron, do not tumble dry, do not dry clean. Do not fold or store the product when it is wet and never store it in damp conditions as this can lead to mold growth

GUARANTEE

1. All Kinderkraft products are covered by a 24-month warranty. The warranty period starts from the day the product is handed over to the Customer.

2. The guarantee is valid only in the member states of the European Union, excluding the overseas territories and the territory of the United Kingdom of Great Britain and Northern Ireland excluding the British overseas territories.

3. The manufacturer’s warranty is not valid for countries other than those listed above. The terms of the additional warranty can be determined by the Seller.

4. In some countries, it is possible to extend the warranty for a limited period of 120 months (10 years). Complete terms and warranty extension registration form available at WWW.KINDERKRAFT.COM

5. Claims must be submitted by completing the form available at WWW.RMA.KINDERKRAFT.COM

6. The warranty does not cover:

7. A. Cosmetic damage, including but not limited to: scratches, dents and cracks in plastic, unless the defect is due to a defect in materials or manufacturing;

8. B. Damages resulting from misuse or poor maintenance – including but not limited to: mechanical damage to the product caused by misuse or poor maintenance. See instructions for use and installation of the product contained in the user manual;

9. C. Damage caused by improper assembly, installation or disassembly of the product and/or accessories. See instructions for use and installation of the product contained in the user manual;
   D. Damage caused by corrosion, mold or rust resulting from improper maintenance, care and storage;

10. E. Damage caused by normal wear and tear or otherwise resulting from the normal passage of time. This includes: tears or punctures in inner tubes; tire damage; damage to the tire tread; fading of fabrics as a result of mechanical use (eg on joints and covering moving parts);

11. F. Damage or erosion caused by sun, perspiration, detergents, storage conditions or frequent washing, etc.;

12. G. Damage caused by accident, misuse, abuse, fire, contact with liquid, earthquake or other external causes;

13. H. Products that have been modified to change functionality without 4Kraft’s written consent;

14. I. Products from which the serial number or batch number has been removed or tampered with in any way;

15. J. Damages caused by the use of third party components or products – including but not limited to: cup holders, umbrellas, reflectors, bells;

16. K. Damage caused by transportation or by the ground handling service provider.

17. The warranty period for accessories included in the product is 6 months from the date of sale, excluding the errors described above.

18. These warranty conditions are complementary to the legal rights of the Customer in relation to 4KRAFT sp. Zoo. The warranty does not exclude, limit or suspend the Customer’s rights under the warranty for defects of the goods sold.

19. The complete text of the Warranty Terms is available on the website WWW.KINDERKRAFT

References

• RMA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>