BELLEZE 2023-32 Zoey Accent Table Drawers Installation Guide
- June 14, 2024
- BELLEZE
Table of Contents
Zoey Accent Table Installation Guide
2023-32 Zoey Accent Table Drawers
FOLLOW US:
@bellezefurniture
CONTACT INFO:
support@belleze.com
1-800-682-6376
ITEM NO. 014-HG-41300
The instruction booklet contains IMPORTANT safety information. Please read it
in full and keep it for future reference.
www.belleze.com
Scan this QR Code to view our online tutorial
https://www.belleze.com/assembly-instructions
Assemble the furniture on an empty carton, carpet, or rug to prevent scratches
or damage.
For safety, please keep pets and children away from the assembly area.
Ensure the product is fully assembled before use. If you are missing any
hardware or products, do not use it until you have restored the missing parts.
This furniture requires 2 people for assembly.
Read this instruction manual prior to assembly to familiarize yourself with
the various steps.
Lay out all components and hardware separately on a flat surface and make sure
that no parts are missing or damaged before assembly. Do not destroy or
discard any packaging until you are certain that you have all the necessary
parts for assembly.
Hand tight all hardwares and careful not to over tighten to avoid damaging the
product.
CAUTION
There are small components used in the construction of this product.
Loose items should be kept away from pets and children to avoid a choking
hazard.
Keep all plastic bags and packaging film away from pets and children to avoid
suffocation.
PACKAGE CONTENTS
| CODE | DESCRIPTION | QTY |
|---|---|---|
| 1 | Top Panel | 1 |
| 2 | Center Panel | 1 |
| 3 | Bottom Panel | 1 |
| 4 | Upper Front Support Panel | 1 |
| 5 | Upper Left Support Panel | 1 |
| 6 | Upper Right Support Panel | 1 |
| 7 | Upper Back Support Panel | 1 |
| 8 | Back Crossbar | 1 |
| 9 | Base Front Panel | 1 |
| 10 | Base Left Panel | 1 |
| 11 | Base Right Panel | 1 |
| 12 | Base Back Panel | 1 |
| 13 | Drawer Bottom Panel | 2 |
| 14 | Left Panel | 1 |
| 15 | Right Panel | 1 |
| 16 | Back Panel | 1 |
| 17 | Drawer Front Panel | 2 |
| 18 | Drawer Left Panel | 2 |
| 19 | Drawer Right Panel | 2 |
| 20 | Drawer Back Panel | 2 |
Install all hardware perpendicular to the opening.
Required tools for assembly (Not included)
-
Attach cam bolts to the underside of the top panel (1).
-
Attach cam bolts to the upper front, upper left, and upper right support panels (4, 5, 6).
-
Assemble the upper back support panel (7) between the upper left and right support panels (5, 6).
-
Assemble the upper front support panel (4) to the upper support assembly.
-
Insert wood dowels to the upper support assembly.
-
Assemble the upper support assembly underneath the top panel.
-
Insert wood dowels to the upper support assembly.
-
Assemble the center panel (2) to the underside of the upper support assembly.
-
Attach cam bolts underneath the center panel (2).
-
Attach cam bolts to the left and right panel (14, 15).
-
Insert wood dowels to the back crossbar (8) and the left and right panels (14, 15).
-
Detach the drawer slider (L2) from the slide bracket (L1) by unlatching the lever.
Attach drawer slider brackets (L1) to the left and right panel (14, 15). -
Attach cam bolts to both sides of the bottom panels (3).
-
Attach cam bolts to the base front, left, and right panels (9. 10, 11).
-
Assemble base back panel (12) between the base left and right panels (10, 11).
-
Assemble the base front panel (9) to the base assembly.
-
Insert wood dowels to the base assembly.
-
Assemble the bottom panel (3) on top of the base.
-
Assemble the back crossbar (8) to the right panel (15).
-
Assemble the back crossbar to the left panel (14).
-
Assemble the left and right panels (14, 15) and back crossbar (8) on top of the bottom panel.
-
Insert the back panel (16) between the left and right panels.
-
Assemble the top assembly to the side panels.
-
Secure the back panels in place.
-
Attach drawer sliders to the drawer left and right panels (18, 19).
-
Assembe the drawer back panel (20) between the drawer left and right panels (18, 19).
-
Insert the drawer bottom panel (13) between the drawer side panels.
-
Attach cam bolts to the drawer front panel (17).
-
Attach the drawering handle to the drawer front panel (17).
-
Assemble the drawer front panel (17) to the drawer assembly.
-
Slide the drawers into the table.
-
Plug the USB power cord into the power brick and to the power outlet. YOU’RE FINISHED!
USER INSTRUCTION (REMOTE CONTROL)
ON
Press the ON button to turn on the light.
OFF
Press the OFF button to tum off the light.
Static Cotor Shortcut
Each button is assign to a color, press the button to seiect your desire
color.
Increase
Press the increase button to increase brightness in static color mode.
Press the increase button to increase effect speed in light effect mode.
Decrease
Press the increase button to decrease brightness in static color mode.
Press the increase button to decrease effect speed in light effect mode.
Flash 7
Press the button to enable spectrun cycle mode.
The colors will cycle between red, green blue, orange, cyan, violet, and
white.
Strobe 7
Press the button to enable color breathing mode.
The colors will cycle between red, green blue, orange, cyan, violet, and
white.
Flash 16
Press the button to enable spectrun cycle mode.
The colors will cycle between alf 16 colors.
Strobe 16
Press the button to enable color breathing mode.
The colors will cycle between all 16 colors. Warning
Only place items on top of the product if they meet the recommended size and
weight limits.
Climbing on, stepping on, or placing overweighted objects on the product may
cause property damage and/or injuries.
Items placed onto this product must be resting on a support surface without
hanging over the edges.
FURNITURE CARE AND MAINTENANCE
Medium – Density Fiberboard
Thank you for your purchase. We want your item to last as long as possible.
To ensure the product gives you years of longevity, please follow the
recommendations in this care and maintenance guide.
MAINTENANCE
- Tighten all bolts and screws again within the first 2 weeks of assembly.
- Check the tightness of all bolts every 2 months and tighten them if necessary.
CLEANING
- Clean the surface of the MDF (medium – density fiberboard) with a lightly dampened cloth.
- Asmall amount of mild soap can be used if necessary.
- Dry the surface immediately after deaning.
DONOT use bleach or alcohol to clean the surface.
DO NOT apply wood treatment on parts made with MDF.
MDF will swell and distort when exposed to water damage. Make sure to dry the
furniture immediately after cleaning.
WARNING
The manufacturer and seller are not responsible for any and all liability
relating to personal injury, property damage or losses, whether direct,
indirect, or incidental, resuiting from the incorrect attachment, improper
use, inadequate maintenance, unapproved modification or neglect of this
product.
WARRANTY
BELLEZE products come with a 1-year warranty from the date of delivery.
Register your product on our website to enjoy our limited lifetime warranty!
https://www.belleze.com/apps/product-registration
AFTER-SALE SERVICE
Encounter any difficulties or missing parts?
Contact us at 1-800-682-6376 or email
us at support@bellieze.com
We will send you repiacement.
Hassle free!
No need to worry about repackaging and sending your item back.
We hope you enjoy your new BELLEZE furniture!
Share your photes on Instagram and tag us: @bellezefurniture.
© All copyright of this document belongs to BELLEZE .
This document may not be printed, translated, reproduced, or distributed in
whole or in
part without written permission from BELLEZE.
v.03022023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>