JAMARA 464005 Dino Push Car Instructions

June 13, 2024
JAMARA

JAMARA 464005 Dino Push Car

Product Information

  • Product Name: Rutscher | Push-Car Dino
  • Model Number: 464005
  • Suitable for: Children over 12 months
  • Maximum Weight: < 15 kg
  • Manufacturer: JAMARA e.K.
  • Manufacturer’s Website: www.jamara-shop.com
  • Product Certification: Complies with Directive 2009/48/EC

Product Usage Instructions

  1. Always use the product under direct adult supervision.
  2. Ensure that the child wears shoes while using the push-car.
  3. Never allow more than one person to ride on the push-car.
  4. Do not use the push-car on public transport surfaces or roads.
  5. This toy does not have brakes, so extra caution is advised.
  6. Before playing, remove all protective films from all parts of the push-car.

General information

JAMARA e.K. is not liable for any damage caused to the product itself or through this, provided this is due to improper operation or handling errors. The Customer alone bears the full responsibility for the proper use and handling, including without limitation, the assembly, the charging process, the use and choice of the operation area. Please refer to the operating and user instructions, it contains important information and warnings.

Suitable for children over 12 months
WARNING!

  • Only use in direct supervision of an adult.
  • Always wearing shoes, never allow more than 1 person.
  • Do not use on public transport surfaces and roads.
  • Risk of accident and injury.
  • This toy has no brakes.
  • Before playing, remove all protective films from all parts.
  • Maximum weight: < 15 kg

Certificate of Conformity

  • Hereby JAMARA e.K. declares that the product „Push-Car Dino , No. 464005“ complies with Directive 2009/48/EC.
  • The full text of the EU Declaration of Conformity is available at the following Internet address: www.jamara-shop.com/Conformity

SAFETY INSTRUCTION

  • Read the complete instructions and security instructions carefully before using the model.

  • To prevent accidents and injuries, DO NOT leave your Child unattended during operation of the vehicle. Never let your Child out of your sight while the driving a vehicle.

  • DO NOT use the vehicle on public roads or places or other dangerous locations. ONLY operate the Ride On Car in places such as private parking, private land or other safe locations. Make sure that no person or animal is endangered.

  • The vehicle has no brake or parking brake. Do not operate the vehicle uphill or downhill, and secure it when parking.

  • DANGER
    For safe driving, you should make sure that your Child understand and adheres to the following rules:

    • Hold tight.
    • Never drive without shoes.
    • Never drive in the dark.
  • Attention!
    Keep the not mounted kit away from small children as it contains swallowable parts. It must be assembled or checked by adult to make sure the car is assembled on the right way before playing.

  • Only use in direct supervision of an adult!
    To control the vehicle a minimum skill level and caution is needed. Make sure you are familiar with the operation of the model and its characteristics. The model is heavy. This is an increased risk of injury and damage in the event of loss of control. Avoid any kind of intentional or unintentional collisions with objects or hazards to persons.

Box contents

  • Model
  • Instruction

Technical data:

  • Dimensions: ~ 500 x 215 x 330 mm
  • Weight: ~ 973 g
    No responsibility is taken for the correctness of this information.
    Subject to change without prior notice.
    Errors and omissions excepted.

Recommended Accessories

  • Traffic Light Grand Ord. No. 460256
  • Traffic Set A Grand Ord. No. 460257
  • Traffic Set B Grand Ord. No. 460293
  • Signalling Disc Ord. No. 460308
  • Trafic barrier Grand Ord. No. 460491

Parts

JAMARA-464005-Dino-Push-Car-FIG-2
JAMARA-464005-Dino-Push-Car-FIG-3

Assembly

  1. Mounting the front wheels
    Remove the cotter pin (11), washers (9) and the spacers (10) from the axle (8).

    • A Slide a washer, wheel (4) and spacer onto the axle in the correct direction.
    • B Guide the axle through the steering column (6).
    • C Put a spacers, a wheel and a washer on the axle.
    • D Secure the whole thing with a cotter pin (11). Press the wheel covers (5) onto the wheels.JAMARA-464005-Dino-Push-Car-FIG-4
  2. Mounting the steering column and steering wheel

    • A Slide the steering column (6) from bottom to top through the hole in the body (1).
    • B Put the steering wheel (3) on the steering column and push it down until it clicks into placeJAMARA-464005-Dino-Push-Car-FIG-5
  3. Mounting the front wheels
    Remove the cotter pin (11), washers (9) and the spacers (10) from the axle (8).

    • A Slide a washer, wheel (4) and spacer onto the axle in the correct direction.
    • B Guide the axle through the spacer (7).
    • C Put a spacers, a wheel and a washer on the axle.
    • D Secure the whole thing with a cotter pin (11). Press the wheel covers (5) onto the wheels.JAMARA-464005-Dino-Push-Car-FIG-6
  4. Mounting of the rear axle holder
    Press the axle holder with tilt prevention (7) into the bodywork (1) from below until it engages.
    Make sure that the tilt prevention is aligned to the rear.JAMARA-464005
-Dino-Push-Car-FIG-7

Service centre

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals