SALORA BEAMER 40BHM2050 Compact Projector Instruction Manual

BEAMER 40BHM2050 Compact Projector
Instruction Manual

INSTRUCTION MANUAL
Note: As the product system is updated from time to time, the specific operation content is based on the actual situation.

Important Safeguards

1. Please read the manual carefully before operating projector. To ensure stable power supply, please use standard power cord.
2. Please use the power supply and cable indicated on the rating label. The projector should be kept away from cloths, sofas and anything that may block the ventilation scoop. Please keep the unit away from flammable and explosive materials.
3. Please do not disassemble the unit by yourself as this will invalidate the warranty service. To protect your eyes, do not stare directly at the lens when the projector is on. The projector must be kept away from water and any other liquids.
4. To prevent electric shock, please keep the projector out of the rain and away from moisture. It is recommended to switch off the projector after it has run for 6 hours non-stop. Please use the original foam and other cushioning materials when transporting the projector.
5. If the projector does not work, please contact the authorized service agent.

Accessories List

AV Signal Cable x1
Remote Control xl
Power Cable x1
User Manual xl

Projector Overview

1. Arrow Keys

2. Return

3. Enter

4. Power Key

5. Power Indicator:
   Standby: red
   Power On: blue

6. Focusing

7. Keystone Correction

1. Lens
2. IR for Remote Control
3. Speaker
4. IR for Remote Control
5. Air Intake
6. Power Input| 7. Cooling Window
8. Headphone Jack
9. AV Port
10. USB Port
11. USB Port / Wired SyncScreen Port
12. HDMI Port
---|---

Specifications

Multimedia Supported Formats

Remote Control

1. Power
2. Aspect Ratio
3. Arrow Keys
4. Home
5. Menu
6. Volume Down
7. Menu
8. Screen Hip
9. Source
10. Enter
11. Return
12. Volume Up
13. Mute

Switching Machine Operation

Power On:
Stepl: Press the power button on the body or the power button on the remote control, the indicator light will turn blue and steady.
Step2: After 2 seconds, the projector starts to start, the image appears on the screen, and the unit enters the normal working state.
Step3: If the projector is newly installed, the image may be blurred or trapezoidal distortion when it is turned on for the first time. Please refer to the “Focus/Keystone
Correction” section for calibration.
Step4: After the image is adjusted clearly, it can be viewed normally.
Power Off:
Step 1: In the working state, press the power button of the body or the power button on the remote control to switch the projector to the standby state.
Step2: After the projector enters the standby state, the machine is in the process of automatic heat dissipation, and the indicator light changes from blue to red.
Connect the power cord to the projector before connecting the power cord to an electrical outlet.

Focus / Keystone Correction

Image Focusing
Place the projector lens perpendicularly to the projection screen or curtain wall, and adjust the focus dial until the image is clear, that means the image focusing is finished.
During the focusing process, you can play the programs or pick up the product menu images to match the focusing adjustment.
Keystone Correction
Please turn the trapezoidal adjustment dial until the image is displayed normally.
Note: The projector has only mechanical trapezoidal correction in the vertical direction and there is no horizontal correction. Make sure the projector is level with the projected image.

Standard Setting

Refer to the data in the table below to place the projector away from the projection screen according to the preset graphic size. When installing, place the projector on a solid, stable countertop. The airframe should be well ventilated. Do not cover or block the vents. There should be no obstructions within 30cm of the vents.

Note: The above data is for reference only, please refer to the physical measurement.

Basic Version Instructions

Source Settings
In the main interface (or press the signal source key on the remote control), select the signal source you want to connect.
Signal Source HDMI / AV.

Basic Version Instructions

Multimedia
Step 1: Insert the U Disk, the icon in the upper left corner will be highlighted and prompt “U Disk”.
Step 2: Select MOVIE, PHOTO, MUSIC or TEXT On the right side of the interface.

Basic Version Instructions

Setting
On the main page, select “Setting”, after entering into the interface, press “ / ” key to enter each sub-menu. Then adjust the parameters as per your requirements, and press the “OK” key to confirm.

Sub-Menu Functions
I. PICTURE: Picture Mode , Color Temperature , Aspect Ratio , Noise Reduction , Reduce Display Size, Projection Direction.
11. SOUND: Sound Mode, Balance, Surround Sound.
Ill. TIME: Sleep Timer.
IV. OPTION: OSD Language, Restore Factory Default, Color Range, Software Upadate(USB).

Screen Mirroring Version Instructions

Screen Mirroring
Step 1: Select Screen Mirroring in the main interface.
Step 2: Press the OK key to enter the interface.
Step 3: After entering into the interface, select the function you need.

Screen Mirroring Version Instructions
Android Screen
Step 1: Select Android Screen in the Syncscreen interface.
Step 2: Turn on the wifi of mobile phone, choose the screen mirroring function of the phone, search for the device name of the projector and click to connect, and wait a few
seconds, then would snccessfully the mirroring .
Note: Different mobile phones have different positions and names for the screen mirroing function, please refer to the manual of the phone.
CD The SSID is the name of the current screen-mirroring device.
2 The instructions of Android Screen.

1. On your Android recevier, Turn on WiFi, and open the setting menu
2. Search your display settings or Multi-screen
3. Select your Miracast recevier: Display_XXXX

Screen Mirroring Version Instructions
iOSScreen
iOS Screen has three connection methods:
Method 1:
Step 1: Projector don’t need to connect WIFI.
Step 2: Turn on Wi-Fi on your iPhone and search for the device name of the projector. For example: Display_ XXXX, select it and enter the password “12345678”, then your iPhone will be connected to the Wi-Fi from the projector.
Step 3: Turn on Airplay on your iPhone, select the device name of the projector.
CD The name and password of the current device. When the projector doesn’t connect to Wi-Fi, you will find a “X”.
2 The instruction of iOS Screen.

1. On your 105 recevier, Turn on WiFi, Search and connect Display_XXXX
2. Open Control Center and Screen Mirroring. Looking for devices that can be mirrorde on
3. Select Display_XXXX

Screen Mirroring Version Instructions
iOSScreen
Method 2:
Step 1: Connect your projector to the W-Fi from a router, you will find the name of the router and a”V on iOS screen.(The WiFi connection method is on page 18)
Step 2: Connect your iPhone to the same Wi-Fi with the projector.
Step 3: Turn on Airplay on your iPhone, select the device name of the projector. You will get your iPhone screen projected.

1. On your IOS recevier, Turn on WiFi, Search and connect TP
2. Open Control Center and Screen Mirroring. Looking for devices that can be mirrorde on
3. Select Display_XXXX

Method3:
Step 1: Select iOS screen from syncscreen.
Step 2: Enter iOS screen, connect your iPhone with the projector via Wired SyncScreen port with USB cable. Your iPhone will receive a trust prompt, confirm “trust”, then would snccessfully the mirroring.
Note: If your iPhone doesn’t receive a trust prompt after connecting with the projector, please use the original iPhone cable to try again.

Screen Mirroring Version Instructions
SyncScreen Setting
Step 1: Select SyncScreen Setting from syncscreen.
Step 2: Choose the setting you want.
The settings include three functions: WIFI / System Upgrade/ More Setting.
WIFI: Search and Cormect WiFi.
System Upgrade: OTA Upgrade/ USB Upgrade.
More Setting: System Reset/ Mirror Mode/ Airplay Mode/ Language.

Screen Mirroring Version Instructions
WiFi Connection
Step 1: Select WIFI and press the OK key to enter the next interface.
Step 2: Select the WiFi that you want to connect from the Wi-Fi list.
Step 3: Enter the correct password through the virtual keyboard.
Select the WiFi that has been connected, press the OK key, and three options will pop up:
Disconnect: Disconnect the Wi-Fi connection this time, but it will be automatically connected after restarting.
Forget: Forget the password. After restarting, it will not automatically connect. The password must be entered again for re-connection.
Cancel: Exit the menu.

Screen Mirroring Version Instructions
More Setting
Step 1: Select More Setting, press OK key to enter the interface.
Step 2: Choose the setting you want.
System Reset:
Click to return back interface, yes is to confirm the restoration, No is to exit the selection.
Mirror Mode: Smooth /Standard/ Quick.

1. Smooth Mode: Requires higher network to optimize the effect of playing video, and caches the video to ensure smooth pictures during playback.
2. Standard Mode: Reduces the cache and delay of the mirroring.
3. Quick Mode: No video caching function. When the network environment is poor, the clarity of the mirroring will be lower to ensure smooth playback and reduce delay.
   Airplay Mode: Can set the channels for 1, 6 and 11 routers. When the network is poor, you can set other channels to avoid the jam and delay.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc, in the United States and other countries.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>