aosu WirelessCam Lite Wireless Security Camera User Guide

June 3, 2024
aosu

aosu WirelessCam Lite Wireless Security Camera User Guide
aosu WirelessCam Lite Wireless Security Camera

What’s Included

  • Camera

  • Screw Pack

  • USB-C Charging Cable

  • Position Sticker

  • Security Sticker

  • Quick Start Guide

Product Overview

Product Overview
Product Overview

CAUTION: Please insert the Micro SD Card according to the direction shown in the diagram. Micro SD Card might JAM if inserted incorrectly and device could be damaged.

SD Card Port: Support Micro SD Card for local storage (Max 512GB).
Reset button: Press and hold the button for 3 seconds, and then the device will be ready to be connected.
Card capacity requirements: 8-512GB.
Read and write speed requirements: class1 O level.
File format: FAT32.

Setting Up the System

Download the Aosu App from the App Store (iOS devices) or Google Play (Android devices).
QR code

Sign up for an Aosu App account, then follow the onscreen instructions to complete the setup.
Sign interface

Mounting the Camera

Find a Good Mounting Spot

To find a spot to mount Camera, you need to test wireless signal strength.

  1. CD Open the Aosu App, go to Camera Settings> Mounting Guide.
  2. To test the wireless signal strength, take your camera and phone to the location where you want to mount the camera.
  3. Move the camera as close to the Wi-Fi Router as possible to get a better signal.
    Mounting the Camera
Select Height and Location

Hang AOSUCam 7-1 Oft (78-118 inches) above the ground. This height maximizes the detection range of the motion sensor of AOSUCam. Avoid placing AOSUCam under direct sunlight.
Height and Location

Test the Wi-Fi signal at installation position

Use cell phone to test Wi-Fi signal quality at the installation position before installing camera, make sure the Wi-Fi router can provide good Wi-Fi signal.
Installation position

Installation

  1. Drilling according to position sticker, drill bit: 15/64″(6 mm).
  2. Insert the plugs.
  3. Tighten the screws.

What is required:
Required Tools

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/ TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.

 This product complies with the radio interference requirements of the European Community

Declaration of Conformity

Hereby, Aosu declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
For the declaration of conformity, visit the Web site: https://www.aosulife.com.
This product can be used across EU member states.
Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment.

The suitable temperature for Camera and accessories is -10°(-5C).
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.

For Camera : Wi-Fi Operating Frequency Range: 24 l 2-2472MHz; Wi-Fi Max Output Power: l 7.l  3dBm(EIRP)

 This product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

AOSU Care

Hi Customer
Thank you for choosing AOSU security products. We have always put OU customers first and foremost.

There are 3 things you should know before using this product:

  1. Micro SD Card
    If you don’t have a Micro SD Card available at home now and don’t want to spend extra time choosing one, please contact us directly.
    TIP: the Micro SD Card got to be formatted after inserting it up.

  2. Select 2.4G Wi-Fi
    The product only supports 2.4G Wi-Fi, please select 2.4G Wi-Fi when setting up the app.

  3. Select installation location.
    Please use your mobile phone to test the coverage of the home Wi-Fi signal at the planned installation position before installation, so that the product can receive a better signal.
    Get all the tutorial videos of using product including but no limit to set up the app, installation and format micro SD card, visit: aosulife.com
    Join “AOSU Care” today as three ways below to get all of your problems solved by one-on-one live chat and phone service tech support.

United States: +1-866-905-9950 Mon-Fri 9AM-5PM (PST)
United Kingdom: +44-20-3885-0830 Mon-Fri 9AM-5PM (GMT)
Germany: +49-32-221094692 Mon-Fri 9AM-5PM (CET)
Japan: +81-50-5840-2601 Mon-Fri 9AM-5PM (」ST

  www.aosulife.com
  @aosulife
 support@aosulife.com

Customer Service

Warranty

12-month limited warranty (The actual warranty period shall be implemented according to the requirements of local laws and regulations)

Email U s
Customer Support: support@aosulife.com

Call Us
United States: + 1-866-905-9950 Mon-F『i 9AM-5PM (PST}
United Kingdom: +44-20-3885-0830 Mon-Fri 9AM-5PM (GMT}
Germany: -+49-32-221094692 Mon-Fri 9AM-SPM (CET}
Japan: +81-50-5840-2601 Mon-Fri 9AM-5PM (」ST)

Facebook: @aosulife
Twitter: @aosulife
YouTube: @aosulife

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals