aosu IndoorCam P1 Camera User Manual

aosu IndoorCam P1 Camera

Getting Started

PRODUCT OVERVIEW

1. Staus LED
2. Lens
3. Microphone
4. SD Card slot
5. Speaker
6. SYNC button
7. Power input

SETTING UP THE SYSTEM

Download the App and Set up the System

1. Download the aosu App from the App Store (ios devices) or Google Play (Android devices).
2. Scan the QR code below or search “aosu” in the App Store or Google Piay
3. Register or ing into the App.Add IndoorCam P1 and scan the QR code for later installation process.

Status LED

Status LED & Description 

• Solid Green
  • Camera powered on
• Blinking Green
  • Ready for setup
• Solid Blue
  • Camera working properly
• Blinking Bule
  • Disconnected from the internet

MOUNTING THE INDOOR CAM

Select a Location for Mounting:

• The camera can be placed on a table, shelf
• The camera can be mounted on a ceilüng.
• The camera can be mounted on a wall
• Select a location and height where you can get the desired view and can reach a power outlet easily.

Explanation :

1. Disconnect the Indoor Cam from the power outlet before mounting.
2. Keep the indoor Cam at least 0.7 ft/20 cm away from walls or anything that may obstruct the view., Do this to avoid infrared reflection which can have a negative Impact on the night vision performance

To mount the Indoor Cam on the ceiling, follow the steps below:

1. Place the Mountng Plate against the ceiling and then mark the points at which drilling will be required
2. Drill holes with a 5/16″(8mmldrill bit.
3. Align the holes on the mounting plate with those in the ceiling. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete,brick, or stucco.Fix the screws with a Phillips-head screwdriver to fasten the mounting plate to the ceiling.
4. Align the grooves with the mounting plate and the Indoor Cam pull forward until it clicks into place.

To mount the Indoor Cam on a wall:
we recommend using the mounting bracket (not provided, users need to purchase by themselves) as the illustration below.

Notice

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if riot installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not OCCur in a particular installation, f this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one ar more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help.

FCC Radio Frequency Exposure 5tatement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The min separation distance is 20cm.

IC Caution

User manuals for license-exempt radio apparatus shall contain the following or equivalent notice in a conspicuous location in the user manual or alternatively on the device or both.
This device complies with Industry Canada licence-exempt RSS standard(s)

Operation is subject to the following two conditions:

1.  this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

IC SAR Warning:
This equipment should be installed and operated with a minimum distance 20 cm
between the radiator and your body

CE
This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Glazero Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU
For the declaration of conformity, visit the Web site:https://www.aosulife.com/

• This product can be used across EU member states
• Do not use the Device in the environment at too high or too iaw temperature, never expose the Device under strong sunshine ortoo wet environment
• The suitable temperature for HomeBase and accessories is -10°C-45°C
• The suitable temperature for Video Doorbell and accessories is-20C 40C.
• When charging. please place the device in an environment that has a normal room temperature and good ventilation. it is recommended to charge the device in an environment with a temperature that ranges from 5°C-25°C

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 am between the device and the human body, To maintain compliance with RF exposure requirements, use a product that maintains a 20cm distance between the device and human body
For HomelBase: Wi-Fi Operating Frequency Range:2412-2472MHz. ; Wifi Max
Output Power: 1713dBm(EIRP)
Wi-FlOperating Frequency Range: 5150MHz- 5850MHz,
Wifi Max Output Power: 13.7dBm(EIRP)
For Video Doorbell:
WI-Fi Operating Frequency Range: 2412-2472MHE; Wi-Fi Max Output Pawer:
18.30 dem

This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect nätural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality
disposal service, or the shop where you bought this product

Customer Service

Warranty
12-month limited warranty (The actual warranty period shall be implemented according to the requirements of local lawS and regulations)

Email Us
Custormer Support: support@aosulife.com

Call Us
United States: +1 866 905 9950 Mon-Fri 9:00-17:00
United Kingdom: +44 20 3885 0830 Mon-Fri 9:00-17:00
Germany: +49 32 221094692 Mon-Fri 9:00-17:00
Japan: +81 (50) 58402601 Mon-Fri 9:00-17:00

Facebook:@aosulife
Twitter @aosulife
YouTube: @aosulife

References

• A better campus life with ulife

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>