aosu C6S Wire-Free Security Camera System User Guide
- June 5, 2024
- aosu
Table of Contents
- aosu C6S Wire-Free Security Camera System User Guide
- Getting Started
- Product Overview
- CONNECTING THE HOMEBASE
- SETTING UP THE SYSTEM
- MOUNTING THE CAMERA
- Select Height and Location
- Mount the camera
- CHARGING THE CAMERA
- Method 2
- Satety Statement
- FCC Radio Frequency Exposure Statement
- Battery warning
- IC Caution:
- IC SAR Warning:
- Customer Service
- Warranty
- Email Us
- Call Us
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
aosu C6S Wire-Free Security Camera System User Guide
Getting Started
For HomeBase installation
- Camera quantity and accessories vary by bundl
- HomeBase power adapter varies by region.
Product Overview
Home Base
CONNECTING THE HOMEBASE
Connect the HomeBase to the Internet
-
Power on the HomeBase, then use the ethernet cable provided to connect the HomeBase to your home router.
-
The LED indicator turns blue (this may take up to 1 min) when HomeBase is ready for setup.
SETTING UP THE SYSTEM
Download the App and Set up the Systems ready for setup.
Download the ‘aosu’ app from the App Store (iOS devices) or Google Play
(Android devices).
Sign up for a ‘aosu’ app account, then follow the onscreen instructions to complete the setup.
MOUNTING THE CAMERA
Find a Good Mounting Spot
To find a spot to mount Wire-Free Security Camera, you need to test wireless
signal strength.
CD Open the ‘aosu’ app, go to Camera Settings> Mounting Guide.
- To test the wireless signal strength, take your camera and phone to the location where you want to mount the camera.
- Move the camera as close to the HomeBase as possible if the wireless.
Select Height and Location
Hang Wire-Free Security Camera 7-10 ft (2-3 m) above the ground. This height
maximizes the detection range of the motion sensor of Wire-Free Security
Camera.
Avoid placing Wire-Free Security Camera under direct sunlight.
Mount the camera
The camera can be mounted both indoors and outdoors.
Drill holes with a 15/64 inch {5.95mm) drill bit, then insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. Firmly nailed the mounting base onto the wall.
-
Tighten the camera to the mounting bracket.
-
Accurately snap the camera to the mounting base.
-
Adjust the viewing angle by checking the live stream feed in the ‘aosu’app.
CHARGING THE CAMERA
Method 2
Satety Statement
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet
on a circuit differentfrom that to which the receiver is connected. (4)
Consultthe dealer or an experienced radio/ TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in fixed/mobile exposure condition. The min separation
distance is 20cm.
This product complies with the radio interference requirements of the European
Community.
Declaration of Conformity
Hereby, Glazero Limited declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
For the declaration of conformity, visit the Web site:
https://www.aosulife.com/.
This product can be used across EU member states.
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
The suitable temperature for HomeBase and accessories is -10°C-45°C.
The suitable temperature for Video Doorbell and accessories is -20°C – 40°c.
When charging, please place the device in an environment that has a normal
room temperature and good ventilation. It is recommended to charge the device
in an environment with a temperature that ranges from 5°C-25°C. RF exposure
information: The Maximum Permissible Exposure {MPE) level has been calculated
based on a distance of d=20 cm between the device and the human body. To
maintain compliance with RF exposure requirement, use product that maintain a
20cm distance between the device and human body. For HomeBase: Wi-Fi Operating
Frequency Range:24 l 2-2472MHz; Wifi Max Output Power: l 7.l 3dBm{EIRP)
Wi-Fi Operating Frequency Range: 51 SOMHz- 5850MHz, Wifi Max Output Power: l
3.7dBm{EIRP) For Video Doorbell:
Wi-Fi Operating Frequency Range: 2412-2472MHz; Wi-Fi Max Output Power: 18.30
dBm
This product is designed and manufactured with high quality
D&’ materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposa I and recycling helps protect natura 1
– resources, human health and the environment. For more information on
disposal and recycling of this product, contact your local municipality,
disposal service, or the shop where you boughtthis product.
Battery warning
- Replacement of a battery with an incorrecttype that can defeat a safeguard (for example,in the case of some lithium battery types).
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
IC Caution:
User manuals for licence-exempt radio apparatus shall contain the following or
equivalent notice in a conspicuous location in the user manual or
alternatively on the device or both.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
IC SAR Warning:
This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
Customer Service
Warranty
12-month limited warranty (The actual warranty period shall be implemented according to the requirements of local laws and regulations)
Email Us
Customer Support: support@aosulife.com
Call Us
United States: 1-866-905-9950 Mon-Fri
7AM-5PM (MST)
United Kingdom:+ 44 20 3885 0830 Mon-Fri 9AM-5PM (GMT)
Germany:+ 49 32 221094692 Mon-Fri 9:00-17:00
Japan: +81 {50) 58402601 Mon-Fri 9:00-17:00
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>