SEE ME HERE W100 Bluetooth Speaker User Manual
- June 12, 2024
- SEE ME HERE
Table of Contents
USER MANUAL
Precautions
Please read the instruction first.
Please follow the instruction carefully.
Please store and use this product at room temperature.
Do not use this product near heat sources such as radiators, heat registers
stoves or other apparatus (including amplifiers) that produce heat.
Do not block the opening of the speaker and do not insert objects into the
vents or slots of the speaker.
Do not throw and drop the product to avoid damages.
Please charge the speaker with product rated voltage.
If the connection line does not match your device, please contact the dealer.
Please keep volumes of the speaker mode rate to avoid temporary or permanent
hearing impairment.
No matter the equipment is damaged due to any reason, it must be repaired by
professional maintenance personnel in time.
Unauthorized disassembly will invalidate the warranty.
If the battery is not properly replaced there will be an explosion accident
which can only be replaced with the same type of battery.
Do not disassemble impact squeeze or throw in to fire If severe swelling
occurs do not continue to use Do not place ina high temperature environment do
not use after the battery is soaked in water.
Battery(battery pack or combined battery)can not be exposed to such conditions
as sunshine, fire or similar over heating conditions.
If consumers use a power adapter to charge they should purchase a supporting
power adapter that has obtained CCC certification and meets the standard
requirements.
Packing List
Instructions of Buttons
Instruction of Ports
Bluetooth Connection
-
Poweron Speakers
When the speaker is powered on, long press the M button for 2 to enter the Bluetooth paring mode, and the Bluetooth indicator will flash quickly, waiting for Bluetooth pairing. -
Connect to a Bluetooth device
Goto Bluetooth page of the device search and connect the paring name “WAVE W100”, the indicator light of the M button| will stay once connected and hearing the prompt tone after succussed
Other:
- Long press § seconds to disconnect bluetooth connectivity and clear matching list
- Speakers support to connect two devices at the same time
TWS(TrueWirelessStereo)function
-
Initiating the Main speaker’ TWS connection Select a speaker to start and switch to Bluetooth mode. Press the TWS key. When you hear the prompt tone the speaker will enter TWS series mode and sort to each for the following speaker.
-
Connecting the Satellite speaker’ TWs.
Power on the Satellite speaker and switch to Bluetooth mode. Then long press M for 2 seconds. toswitchto pairing mode and wait for TWS of main speaker to connect. -
TWS Connected successfully
The main and Satellite speaker are successfully connected, and an TWS set is made. The TWS key indicator of the mian speaker blinks slowly, and the TWS key indicator of the Satellte speakeris steadyon. -
Disconnect TWS
Alter connected successfully, if you want to exit the TWS mode, just short press the TWS key.
Other note:
- Main speaker is the left channel, Satellite speaker is the right channel
- ATWS setonly support 2pcs Speakers.
- After TWS was connected successfully, operating the function keys of any speaker the other speaker will have synchronous operation accordingly except for volume treble and bass adjusting
Specications
Product size:265x150x172mm
Product weight:3.07kg (including built-in Li-ion Battery)
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Any Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>