SEE ME HERE BV670 Bluetooth Speaker User Manual
- June 6, 2024
- SEE ME HERE
Table of Contents
HERE BV670 Bluetooth Speaker
User Manual
BV670
Bluetooth Speaker
**** Warnings
- To ensure proper use and trouble-free operation, please carefully read this user manual first.
- For the first use, a full charge is recommended.
- Please use and store the product at room temperature.
- Do not throw and drop the product to avoid damage.
- Do not expose the product to fire, high temperature, direct sunlight, etc.
- Do not use organic solvents or other chemicals to clean the product.
- Do not allow small particles to get into the product.
- Please keep volumes of the speaker moderate to avoid temporary or permanent hearing impairment.
- Do not disassemble the product, or make any modifications to the structure or any parts of it.
- Keep the product out of children s reach.
- If the battery is not properly replaced, there will be an explosion accident, which can only be replaced with the same type of battery.
- Batteries (battery packs) can not be exposed to such conditions as sunshine, fire or similar overheating conditions
Packing details
Keys functions
Call answer : press it to answer/hang up an incoming call, press and hold
it to decline a call.
Disconnect: Press and hold it to disconnect the current device, and the
speaker becomes detectable for pairing.
Ports functions
Bluetooth connection
Turn on the speaker
Press and hold the power button for 2 seconds, it issues the sound of “Ding”,
and the blue LED light flashes,it can be detected.
Pair a Bluetooth device ****
Active the Bluetooth of your device, and search for BV670, Once the connection
is completed, the speaker will beep and the blue LED light will stay on.
The speaker will re-connect to the used device nearby automatically if the
Bluetooth is activated in the future.
Other instructions
If you want to pair the speaker with another device, press and hold the Mode
button to disconnect the current device and the speaker becomes detectable,
press the power button to reconnect.
True Wireless Stereo (TWS) Function
- Set up the TWS system Turn on two BV670 speakers and make sure neither of them is paired with any mobile device. Doule press one speaker’ s a+ -“Button. It issues a sound and the speaker begins to connect with the other one. After the sound of Ding-dong, the TWS system is set up successfully.
- Connect them to a Bluetooth device Activate the Bluetooth of the device of your device and search for BV670, select it once ifs on the list .The Blue LED lights keeps flashing slowly indicating a successful connection between the device and the speakers.
- Disable the system
Press and hold either speaker’ s ‘+ -” button to disconnect the device and disable the TWS system.
Other instructions:
- When two speakers connect for the first time, press “+-” to enter TWS mode. After TWS paired, the master speaker indicator keeps flickering while the slave one keeps on.
- If two speakers TWS paired successfully, they will auto-reconnect next time.
- When TWS paired successfully, the blue light of the slave-speaker will keep on. You will see the status of the speakers from the master speaker.
- When TWS paired successfully, operates either of the speakers, the other will have the same operation simultaneously.
Specifications
Basic parameters
Speaker type| Portable Bluetooth speaker
Support storage| Up to 32GB Micro SD card(FAT 32)/flash drive
Power supply| Built-in 3000mAh lithium battery
DC 5V–1A USB charger adapter about 4-5 hours
Technical Parameters
Loudspeaker| Bass speaker(77mm, external magnetic) middle and treble speaker
(53mm, infernal magnetic)
Output power| 15W THD-10°/0
Frequency response| 100Hz-20KHz
Bluetooth standard| Bluetooth 5.0
USB Standard| USB2.0 (compatible with USB1.1)
Playing parameters| MP3,WMA,WAV,APE, FLAC
Support Media Type| MP3:8Kbps-320Kbps
WMA: SKbps-384Kbps
WAV:32Kbps-384Kbps
Product size 169.5×125×107mm
Product net weight： 850g±10g（including Built-in lithium battery）
FAQ
-
FAQ Solutions Not able to connect your device 1. Restart the speaker and try again 2. If your device requires a Pin code, please enter 0000.
Keeps cutting out when playing| Please ensure the speaker is within the operating range and there is nothing between the speaker and the device.
Not able to play the music in
Micro SD card| 1. Please ensure the format of the Micro SD card is FAT32.
2. Please ensure the formats of the music files are MP3, WMA, WAV, APE, FLAC
No sound when playing| 1. Please adjust the volume of the speaker.
2. Please check if the speaker is paused.
Not able to turn on| Please try to charge the speaker or mute it.
No sound in AUX-In mode| 1. Check if the audio cable connected
2. Check if the audio port is damaged
Not play with a USB flash drive| 1. Check if switch to USB play mode
2. Check if the USB flash drive damaged
3. Check if it is transmitting data with the PC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna
. — Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
FCC ID: 2AX0X-SPRSPK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>