SEE ME HERE S2303 Karaoke Speaker Bluetooth User Manual

SEE ME HERE S2303 Karaoke Speaker Bluetooth

Product Information

Specifications:

• Model: WAVE W10
• Contents: Speaker, USB charging cable/data cable, 3.5mm audio cable, User manual
• Button Functions: Volume control, track selection, mode switching, play/pause
• Indicators: Charging indicator (red while charging, green when fully charged), Power indicator (red flashing)

Frequently Asked Questions

• Q: How do I know if the speaker is in Bluetooth mode?
  • A: The blue light will quick flash while the speaker is waiting for pairing. The light will stay on when connected successfully.
• Q: How do I switch to TF card mode?
  • A: In TF card mode (MicroSD card), the green light will stay on. Short press the mode switch button to switch between modes.
• Q: What does the cyan light indicate?
  • A: The cyan light indicates Aux mode. It will stay on when the speaker is in Aux mode.

Precautions

• Please read the instruction first.
• Please follow the instruction carefully.
• Please store and use this product at room temperature.
• Do not use this product near heat sources such as radiators,heat registers, stoves,or other apparatus (including amplifiers) that produce heat.
• Do not block the opening of the speaker,and do not insert objects into the vents or slots of the speaker.
• Do not throw and drop the product to avoid damages.
• Please charge the speaker with product-rated voltage.
• If the connection line does not match your device,please contact the dealer.
• Please keep volumes of the speaker mode rate to avoid temporary or permanent hearing impairment.
• No matter the equipment is damaged due to any reason,it must be repaired by professional maintenance personnel in time.
• Unauthorized disassembly will invalidate the warranty.
• If the battery is not properly replaced,there will be an explosion accident, which can only be replaced with the same type of battery.
• Do not disassemble,impact, squeeze or throw in to fire;If severe swelling occurs,do not continue to use;Do not place in a high-temperature environment,do not use after the battery is soaked in water.
• Battery(battery pack or combined battery)can not be exposed to such conditions as sunshine,fire or similar over heating conditions.
• If consumers use a power adapter to charge,they should purchase a supporting power adapter that has obtained CCC certification and meets the standard requirements.

Packing Details

Functions

Button Function

Interface Function

Connections

Bluetooth Connection

1. Go to Bluetooth Pairing Mode
   • Power on the speaker, press and hold M button for 2 seconds to go to Bluetooth pairing mode, then the indicator of M button will flash quickly.
2. Connect with devices
   • Go to the Bluetooth list on your smart device and find “WAVE W10” to confirm connection.
   • You will hear the confirmation sound and the indicator of M button stays.

Tips

1. Press and hold the M button for 5 seconds to disconnect with the current device and clear the paired list.
2. The speaker can connect with 2 smart devices at the same time.

TWS Connection

1. The master speaker initiating connection
   • Power on one speaker and switch to Bluetooth mode, short press“ V+” &“ V-” at the same time ,the speaker will go to TWS mode and search the slave speaker after you hear a confirmation sound.
2. The slave speaker initiating connection
   • Power on the slave speaker and switch to Bluetooth mode, press and hold M button for more than 5 seconds to disconnect with the smart phone and switch to the pairing mode, wait for the connection from the master speaker.
3. TWS connection
   • The master and slave speaker will connect successfully and with a confirmation sound. The indicator of the master speaker will indicate the Bluetooth status, the blue indicator of the salve speaker will stay.
4. TWS disconnection
   • Short press“ V+” &“ V-” at the same to disconnect from TWS mode.

Tips:

1. The master speaker is the left channel, the slave speaker is the right channel.
2. A TWS set only support 2pcs speakers.
3. Press the buttons on either speaker will have synchronous operation.

Technical Parameters

Basic Parameters

Speaker Type| Bluetooth Speaker
Storage Type| Supports FAT/FAT32 format Micro SD card
Power Supply| Charge about 3 hours by using a DC5V-2A adaptor
Technical Parameters
Speaker Unit| 22.25 inch full-range speaker unit+ +13056mm passive radiator

Frequency Response| 65-20KHZ
Bluetooth Version| Bluetooth 5.3
USB| USB2.0,compatibleUSB1.1

MP3、WMA、WAV、APE、FLAC

Playing Function
Format Support| MP3:8Kbps-320Kbps WMA:32Kbps-384Kbps WAV:32Kbps-1414Kbps

• Product Size: 162 x 84 x 83mm
• Product Weight: 700g (Built-in battery included)

Contact

• Manufacturer: Shenzhen Fu Jiao Bu San Electronics Co., Ltd.
• Address: No. 32, Hangkong Road, Baoan District, Shenzhen City – Bu See Bu San Audio-Visual Innovation Park
• Tel: 0755-61181399
• Website: www.hb2099.com

Scan

Documents / Resources

| SEE ME HERE S2303 Karaoke Speaker Bluetooth [pdf] User Manual
S2303 Karaoke Speaker Bluetooth, S2303, Karaoke Speaker Bluetooth, Speaker Bluetooth, Bluetooth
---|---

References

• 流浪者户外演艺音响 K歌音响 便携式音箱 蓝牙音箱 扩音器 视频机- 深圳市不见不散电子有限公司官方网站

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>