Shenzhen See Me Here Electronic E7 Bluetooth Speaker User Manual
- June 6, 2024
- Shenzhen See Me Here Electronic
Table of Contents
Shenzhen See Me Here Electronic E7 Bluetooth Speaker
Warnings
- To ensure proper use and trouble-free operation, please carefully read this user manual first.
- For the first use, a full charge is recommended.
- Please use and store the product at room temperature.
- Do not throw and drop the product to avoid damages.
- Do not expose the product to fire, high temperature, direct sunlight, etc.
- Do not use organic solvents or other chemicals to clean the product.
- Do not allow small particles to get into the product.
- Please keep volumes of the speaker moderate to avoid temporary or permanent hearing impairment.
- Do not dissemble the product, or make any modifications to the structure or any parts of it.
- Keep the product out of children’s reach.
Packing details
Buttons’function
Bluetooth disconnect
Press and “- +” at the same time can disconnect current device, and E7 goes to
discoverable status;
If press “” power key”” can reconnect last Bluetooth device
Ports’function indicator
Date access
Insert Micro SD card when power off, Use date cable connect to PC, press and
hold “Power Key”enter SD Card mode, then can copy music files on Micro SD
card.
Bluetooth connecting
-
Power on
Press and hold “power key” 2s, with voice prompt “ding dong” and “ding” Bluetooth LED flickering, waiting to connect. -
Bluetooth connect
Go to device’s Bluetooth page, find and connect the pairing name: E7 With a voice” dong dong ding” and the Blue LED stays.
Can connect E7 automatically once open the device’s Blutooth function in next use
Other tips
If need connect to other Bluetooth device, press and hold “+ -” at the same
time disconnect current device, E7 goes to conneting status.
True wireless stereo function
-
TWS connection
Power on both E7, and both under disconnect status, choose one of them and press “+ – ” at the same time once connected, the other E7’s LED will stays. -
Let TWS speakers connect to Bluetooth device
Go to the device’s Blutooth page, and find E7 to connect, the LED will stay. -
TWS disconnect
Take each of them, press “+ -“at the same time, can disconnect TWS.
Tips：
- Let 2pcs E7 connect,for the 1st one you press “+ -” , this one is the main speaker (left channel), and the other one is the follow speaker(right channel).
- Only support 2pcs speakers under TWS connection.
- Will keep precious main/fellow relationship and reconnect TWS for next time use.
- Once TWS connected, fellow speaker’s LED keeps stay, and main speaker’s LED indicates the status of play, pause, Bluetooth connection etc.
- Under TWS, operate each of them, the other one has synchronous operation.
Technical Specification
Product Size： 118×90×90mm
Product weight： 437g（Including built-in Lithium battery）
FAQ
| Questions | Solutions |
|---|---|
| Can not connect | 1, Restart the speaker |
2, if need passcode, enter 0000
Discontinuity| 1, No more than 10M between the device and speaker
2, No barrier between the device and speaker
Micro SD can not play| 1, the Micro SD should be under FAT32 format
2, the formats of music files should be WAV, MP3, WMA
No Sound when play| 1, Check the volume’s ajustment
2, Check whether under pause or mute status
Can not power on| 1, Check whether low battery
No response| 1, Once crash, restart the speaker via restart key.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
FCC ID: 2AXOX-E7
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>