Kinderkraft Lumi 2 Dark Gray Electric Rocker User Guide
- June 10, 2024
- Kinderkraft
Table of Contents
Kinderkraft Lumi 2 Dark Gray Electric Rocker
Specifications
- Battery Power: 4 x AAA 1.5V (not included)
- USB-DC Cable Power (included): Requires USB-A port with output parameters: 5.8 – 6.0V voltage, minimum 1A current
- Estimated Battery Life: Up to 5 hours depending on battery type
- Remote Control Power: 1 x CR2025 3V (not included)
Product Description
The product includes the following elements:
- Seat
- Lounger footrest
- Legs
- Canopy with toys and mosquito net
- USB-DC cable
- Screws x4
Remote control is also provided.
Assembly/Disassembly Instructions
Follow steps from A to N as shown in the diagrams:
- Assemble on a soft surface to avoid damaging the product.
- Check all lounger elements (1-7) for any damage after unpacking.
- Unfold the seat and connect the frame elements using the provided clips on both sides.
- Secure the seat fabric to the frame using Velcro straps.
- Attach the legs to the footrest using the control plate and secure with four screws using a Phillips screwdriver.
- Place the assembled lounger on the floor.
IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS
Please read and keep for future reference.
- Never leave the child unattended.
- Stop using the product when the child begins to sit.
- Never use this product at a height (e.g., on a table).
- Always use safety belts.
- Never use the toy bar to carry the product.
- Do not move or lift the product while a child is in it.
- If the product is connected to a music player, ensure the volume is set to a low level.
- Never allow the child to sleep in the product. It cannot replace a crib. If your baby needs to sleep, place them in an appropriate crib or bed.
- Do not use the product if any component is damaged or missing.
- Do not use any additional equipment or spare parts other than those recommended by the manufacturer.
Safe Use of Batteries and Chargers
Do not charge non-rechargeable batteries. Do not mix different types of batteries or new and used batteries. Batteries must be inserted with the correct polarity. Remove exhausted batteries from the product. Do not short- circuit the battery terminals.
WARNING:
This product contains a button battery. Swallowing a button battery may
cause serious internal chemical burns. If you suspect that batteries have been
swallowed or placed inside any part of the body, seek medical advice
immediately.
Maintenance and Cleaning
The seat pad and pillow are washable. For the toy bar, use a clean, damp cloth with mild soap. The rocker base can be cleaned with a soft, dry cloth. Do not immerse in water or chemically clean.
Storage and Disposal of Used Equipment and Batteries
The crossed-out wheeled bin symbol on the equipment, batteries, packaging, or accompanying documents means that the product should not be treated as regular waste. It is the user’s responsibility to dispose of used equipment and batteries at a designated collection point for recycling.
Warranty
Complete warranty terms are available on the website WWW.KINDERKRAFT.COM.
Contact Information
For assistance with any issues related to Kinderkraft products, you can contact us in the most convenient way for you:
International contact:
support@kinderkraft.com | +44 20 4525 0748
Manufacturer: 4Kraft Sp. z o.o. ul. Tatrzańska 1/5, 60-413 Poznań, Poland
Follow us on social media:
- Instagram: kinderkraftofficial
- Facebook: kinderkraft
FAQ
How do I clean the product?
Use a damp cloth with mild soap to wipe down the surfaces. Do not submerge in water or use harsh chemicals.
Can the lounger be used outdoors?
It is recommended to use the lounger indoors to prevent exposure to weather elements that may damage the product.
What is the weight limit for this product?
The maximum weight capacity for this product is X pounds/kilograms.
How do I install or change batteries in the rocker?
Use a Phillips screwdriver (not included in the set) to unscrew the protective cover and replace the batteries, paying attention to polarity as shown in diagram K.
How do I manage the device?
You can control the rocker using the remote control (7) and the touchpad on the leg support (diagram J). After turning on the device, the LED above the power icon will light up.
How do I adjust the pillow?
Adjustment is done using the hook-and-loop fastener. By moving the strap down, you can lower the pillow, and by pulling the strap up, you can raise it. The hook-and-loop fastener and pillow are used to stabilize the pillow's position.
Can I connect the rocker to my phone?
Yes, you can connect the rocker to your phone via Bluetooth to play your child's favorite melody. Once the connection is active, you will hear a characteristic sound from the rocker.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>