Roco 7310040 Working With Etched Labels Instruction Manual

Roco 7310040 Working With Etched Labels

Product Information

Specifications :

• Product Name: Etched Labels
• Model Number: 7300040-921
• Manufacturer: ROCO

Product Usage Instructions

Removing Printed Labels from Frame:

1. Carefully remove the printed labels from the frame to prepare for etched labels installation.

Working with Etched Labels:

1. The etched label surface is initially covered with paint. To reveal the metal numbers and letters, follow these steps:
2. Use a suitable tool to remove the paint from the actual letter and numeral surfaces.

ROCO wishes you great enjoyment with your new model equipped with etched labels

Mounting Instructions:
 Use appropriate adhesive or cement to securely attach the etched labels to the desired surface.

FAQs (Frequently Asked Questions)

• Q: How do I make the metal numbers and letters visible on the etched labels?
  A: Remove the paint covering the actual letter and numeral surfaces using a suitable tool.

Working with etched Labels

Please note! To achieve proper mounting of the enclosed etched labels will you please follow these instructions: As delivered the etched label surface is completely covered with paint. To make the metal numbers and letters visible the paint must be removed from the actual letter and numeral surfaces. This is done as follows:

1. Remove printed labels from the frame!
2. Dont remove the remaining signs from frame. Place them with their backs on a firm and completely level surface.
3. Remove the paint from the surface of the characters carefully either with the ROCO rubber (art. no. 10002) a sharp knife having a straight edge or similar object (e.g. single-edge razor blade). Take care that while doing this the paint surface between the characters is not dam-aged.
4. If the result is not satisfactory it is recommended that the remaining paint is removed with a suitable paint remover. Thoroughly dry the labels and then reapply fresh paint. Repeat the removal of the  paint from the surface of the characters after the new paint is completely dry.
5. Carefully extract the different labels from their etching frames and remove any remaining burrs.
6. Attach the etched labels with very small amounts of adhesive on top of the printed signs on the vehicle.
   ROCO wishes you lots of pleasure with your new model.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>