MF-130 Commscope Andrew Solutions Instruction Manual
- June 13, 2024
- CommScope
Table of Contents
1.0 GENERAL NOTES
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR PATENT INFO: https://www.cs-pat.com
2.0 DESIGN NOTES
2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
3.0 MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
4.0 TEST
5.0 PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING
CONTAINER
5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED
- MF-130
- STRAP FOR REFERENCE
- WB-CY210
- MTC8950BHK
- WB-TT24
REVISIONS
REV.| DESCRIPTION| DATE| APPROVED
A| INITIAL RELEASE| JL1183 13DEC23| XK1001 40185138CMO
COMMSCOPE, INC. OF NORTH CAROLINA
TOLERANCES| SAP MATERIAL MASTER
1 PLACE X[.X] ± 0.12[3.0] | 3 PLACE .XXX[.X] ± 0.030[0.8]| WB-K210-B-T
2 PLACE .XX[.X] ± 0.06[1.5]| ANGLES ± 2°
FINISH| MATERIAL
---|---
DENSITY
MASS
VOLUME
SURFACE AREA| lbs/in³
220.35 lbs
776.11 n³
14042.17 in²
---|---
HEIGHT
LENGTH
WIDTH| 160.7″
121.5″
31.8″
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES INTERPRET PER ANSI Y
14.5M-1994| | NAME| DATE
---|---|---|---
CE| JL1183| 13DEC23
RW| JL1183| 12/13/2023
|
AD| XK1001 | 12/13/2023
RE| JL1183| 12/13/2023
ECN 40185138CMO
TITLE
ICE-BRIDGE,24″Wx12’L,BUR-POST, 3X6TRAP
SCALE
1:20| DOCUMENT NO.
WB-K210-B-T
Auth Group|
---|---
INSL |
MODEL| VERSION| 00
STATUS| RE
REVISION| A
DRAWING| STATUS| RE
REVISION| A
DETAIL A
SCALE 1 : 8
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES; 2
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT
ITEM | PART NO. | DESCRIPTION | QTY | WEIGHT | NOTE NO. |
---|---|---|---|---|---|
1 | WB-TT24 | TRAPEZE KIT, 24″ WIDE, 3 RUNG | 3 | 11.14 LBS | |
2 | WB-CY210 | SAFETY GRATED WAVEGUIDE BRIDGE CHANNEL | 1 | 49.84 LBS | |
3 | MF-130 | 3.5″ O.D. X 13′-4″ DIRECT BURIAL PIPE COLUMN | 2 | 57.97 LBS | |
4 | WBLB24308 | 24″ WAVEGUIDE BRIDGE SUPPORT BRACKET | 2 | 7.14 LBS | |
5 | GUB-4356 | 1/2″ X 3-5/8″ X 6″ GALV U-BOLT | 4 | 0.81 LBS | |
6 | WBJB6 | 1/2″ J-BOLT | 4 | 0.41 LBS | |
7 | GWF-04 | 1/2″ GALV FLAT WASHER | 4 | 0.04 LBS | |
8 | GWL-04 | 1/2″ GALV LOCK WASHER | 4 | 0.01 LBS | |
9 | GN-04 | 1/2″ GALV HEX NUT | 4 | 0.04 LBS | |
10 | PC-034 | PIPE CAP 3-1/2″ | 2 | 0.66 LBS |
© 2023 CommScope, Inc. Confidential
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
ICE-BRIDGE,24″Wx12’L,BUR-POST,3X6TRAP
SIZE
C
| SCALE
1:20
| DOCUMENT NO.
WB-K210-B-T
| | DRAWING
VERSION| STATUS| REVISION
00| RE| A